ok i was in accord disscussionand was told to look over here so i am looking for good pistons at a good price new for an 89.00 bore on jdm h22 block any help would be appreciated

 

wiseco but i have the same bore and i piad 770 new for mine so good luck

 

mahle makes a special piston for the FRM sleeves look in to them

 

+1

This thread is traveling the same direction with "attention f and h series..."

Back in the day, I would have told you re-sleeve that block, but things has changed a little, I know Jun also makes a custom piston that supports what every compression and that also was back in my day the down side of Jun was the price, so take it for what it's worth. Look there also

 

JUN will run you every dim and nickle you got.

 

They're about $1600 shipped, pretty expensive but at the same time never heard of problems from people who have had them.

 

If you're at 89mm you must be sleeved so no need to worry about FRM obviously, and at that bore size it'll be custom, so a "good price" is pretty relative. ~$800 is what I would expect also.