FS: Shaved Type R brackets for 11.1in brake upgrade
Thread Starter
Honda-Tech Member
Joined: Oct 2004
Posts: 874
Likes: 0
From: ECEFC.com
FS: Shaved Type R brackets for 11.1in brake upgrade
Name: Darryl
Location: Raleigh/Durham NC
Contact: email me at d_baker3@hotmail.com
Item: shaved ITR brake caliper brackets
Price: $75 shipped (firm)
Up for sale are my ITR brackets that have been milled down (by a machine shop) approximately 3mm. These brackets allow you to install Type R/Accord Wagon/CRV/Prelude Vtec/Viger/Legend brake calipers and redrilled 11.1in rotors (from a 94 Prelude Vtec) to integra knuckles without any problems. Since these were on my car for about 2 years, I would recommend that you replace the pins or at least grease them.
Pictures
If you have any questions, email me at the address above.
Location: Raleigh/Durham NC
Contact: email me at d_baker3@hotmail.com
Item: shaved ITR brake caliper brackets
Price: $75 shipped (firm)
Up for sale are my ITR brackets that have been milled down (by a machine shop) approximately 3mm. These brackets allow you to install Type R/Accord Wagon/CRV/Prelude Vtec/Viger/Legend brake calipers and redrilled 11.1in rotors (from a 94 Prelude Vtec) to integra knuckles without any problems. Since these were on my car for about 2 years, I would recommend that you replace the pins or at least grease them.
Pictures
If you have any questions, email me at the address above.
Thread
Thread Starter
Forum
Replies
Last Post
builthatch
For Sale
2
Jan 5, 2010 08:30 PM
