So CAL: Parting EVERYTHING out of a 2000 Civis Si EM1
I crashed my 00 Honda Civic Si. I messed up the front bumper, and front lip. the radiator support was pushed in a couple inches and air bags deployed. Passenger front shock is blown and little mini dent on one of the wheel.
I am parting out EVERYTHING!
Interior Color - Type K
Exterior Color - Nighthawk Black
COMPLETE SWAP (Just need to buy a Tranny) $2300 OBO
Engine (almost everything has been replaced within the last 6-9 months)
2000 B16A2 80,000 miles... (180+ PSI in all the cylinders)
New Honda OEM Timingbelt/waterpump/drivebelts (done at Corner 3 Garage)
New Vision 10.2mm spark-plug wires with NGK Platinum plugs
New Excedy OE clutch
New Rite-way Starter
New Honda OEM Alternator
New driver side axel/New half-shaft axel... Passenger axel is still in good condition.
New IAC valve sensor
New Honda Distributor
New hoses all around
New Energy motor mount bushings w/ shift-linkage bushing
New Aluminum Radiator (dont know the brand, but will include, def keeps engine cooler than stock radiator)
New 99 00 HONDA OEM B16A2 Wiring Harness (They run for about $600)
EVERYTHING on the engine is STOCK
**Transmission is DONE! Tranny will be on swap but you def need to put a new one on the swap
**Primary O2 sensor went out in crash.
(Dont have any of the paper work, took the swap out of my friends hatch, and he sold his car with every recite. I wish i could keep this engine n put it in another EK, but Im going to get a loan out for an EP3. you can tell everything is new on the outside, and i can pull the valve cover to show u the timing that was done. Im not here to rip anyone off, this engine is super legit, it runs strong, it just needs a tranny and it will be a swap that will last you another 60k)
Everything I am parting out is in good/great condition
Si Cluster w/ CTR Carbon Fiber Bezel (AMBER) 10/10 - $200
Si Climate Control Bezel (AMBER) comes with conversion wiring 9/10- $150
Si Honda Genuine OEM Grille - 9/10 -$150
Si Front & Rear Sway Bars - Front - $120. Rear - $80
Si OEM Front Strut Bar - $40
Si Seats - Front - 9/10 - $100. REAR, $40
BLOX Short Shifter - $80
BLOx Front Camber Kit - $80
Red stiching Shift Boot - $20
OEM Center Console Arm Rest - $80
99 00 Civic Cup holder/extra storage area - $20
White 15X6.5 Rota Slipstream wheels w/ Falken Ziex 912 tires (80% thread left) - $350 OBO (tiny dent on wheel, not noticable. nothing leaks. still drives fine)
Yellow Fog Lights from JDMCARBOY.COM w/ OEM fog light harness - $100
Ill sell the OEM interior foglight harness for $60
Door Panels w/ power-windows & interior wiring harness - $400
A/C complete package will be additonal $200
Si Front & Rear Disc Conversion - Front $150 OBO(Passenger side might need a new wheel barring) Back - $150
Note, I will need the down-versions from whatever 96-00 civic so i an wheel the car out.
New Custom OE stock muffler - will fit any 96-00 honda civic coupe/sedan. - $80
Almost everything on my exterior is in great condition. Need fenders or rear bumpers, throw offers
TEXT/CALL ME! IF YOU WANT PICTURES, I CAN SEND YOU PICTURE MESSAGES OF WHATEVER PART YOU ARE INTERESTED IN.
SOME OF THE PARTS I WILL NOT TAKE LOWER OFFERS. SOME I WILL TAKE LOWER OFFERS. JUST MAKE SURE TO TEXT OR CALL ME!
949-690-6955
I am parting out EVERYTHING!
Interior Color - Type K
Exterior Color - Nighthawk Black
COMPLETE SWAP (Just need to buy a Tranny) $2300 OBO
Engine (almost everything has been replaced within the last 6-9 months)
2000 B16A2 80,000 miles... (180+ PSI in all the cylinders)
New Honda OEM Timingbelt/waterpump/drivebelts (done at Corner 3 Garage)
New Vision 10.2mm spark-plug wires with NGK Platinum plugs
New Excedy OE clutch
New Rite-way Starter
New Honda OEM Alternator
New driver side axel/New half-shaft axel... Passenger axel is still in good condition.
New IAC valve sensor
New Honda Distributor
New hoses all around
New Energy motor mount bushings w/ shift-linkage bushing
New Aluminum Radiator (dont know the brand, but will include, def keeps engine cooler than stock radiator)
New 99 00 HONDA OEM B16A2 Wiring Harness (They run for about $600)
EVERYTHING on the engine is STOCK
**Transmission is DONE! Tranny will be on swap but you def need to put a new one on the swap
**Primary O2 sensor went out in crash.
(Dont have any of the paper work, took the swap out of my friends hatch, and he sold his car with every recite. I wish i could keep this engine n put it in another EK, but Im going to get a loan out for an EP3. you can tell everything is new on the outside, and i can pull the valve cover to show u the timing that was done. Im not here to rip anyone off, this engine is super legit, it runs strong, it just needs a tranny and it will be a swap that will last you another 60k)
Everything I am parting out is in good/great condition
Si Cluster w/ CTR Carbon Fiber Bezel (AMBER) 10/10 - $200
Si Climate Control Bezel (AMBER) comes with conversion wiring 9/10- $150
Si Honda Genuine OEM Grille - 9/10 -$150
Si Front & Rear Sway Bars - Front - $120. Rear - $80
Si OEM Front Strut Bar - $40
Si Seats - Front - 9/10 - $100. REAR, $40
BLOX Short Shifter - $80
BLOx Front Camber Kit - $80
Red stiching Shift Boot - $20
OEM Center Console Arm Rest - $80
99 00 Civic Cup holder/extra storage area - $20
White 15X6.5 Rota Slipstream wheels w/ Falken Ziex 912 tires (80% thread left) - $350 OBO (tiny dent on wheel, not noticable. nothing leaks. still drives fine)
Yellow Fog Lights from JDMCARBOY.COM w/ OEM fog light harness - $100
Ill sell the OEM interior foglight harness for $60
Door Panels w/ power-windows & interior wiring harness - $400
A/C complete package will be additonal $200
Si Front & Rear Disc Conversion - Front $150 OBO(Passenger side might need a new wheel barring) Back - $150
Note, I will need the down-versions from whatever 96-00 civic so i an wheel the car out.
New Custom OE stock muffler - will fit any 96-00 honda civic coupe/sedan. - $80
Almost everything on my exterior is in great condition. Need fenders or rear bumpers, throw offers
TEXT/CALL ME! IF YOU WANT PICTURES, I CAN SEND YOU PICTURE MESSAGES OF WHATEVER PART YOU ARE INTERESTED IN.
SOME OF THE PARTS I WILL NOT TAKE LOWER OFFERS. SOME I WILL TAKE LOWER OFFERS. JUST MAKE SURE TO TEXT OR CALL ME!
949-690-6955
How much for the d brackets that hold the sway bar to the subframe? All I need are the 2 metal pieces.
#30 http://www.providencehondaservice.com/order-parts.aspx
#30 http://www.providencehondaservice.com/order-parts.aspx
Honda-Tech Member
Joined: Dec 2003
Posts: 1,735
Likes: 0
From: Standing on the corner selling cocaine, rippin shows live on stage for hoes yellin my name
I need the front and rear brake setup, but I don't have a brake setup to give you in exchange. if you change your mind I am interested in the brakes front and rear.
3 of the 4 tail lights are in good condition. the passenger side on the frame, has a huge crack in it.
Must have a trade for front and rear conversion
selling sways w/ complete hardware since its all in good condition
Must have a trade for front and rear conversion
selling sways w/ complete hardware since its all in good condition
Thread
Thread Starter
Forum
Replies
Last Post
cha chi
Vehicles for sale
40
Sep 14, 2004 02:36 PM
cha chi
Vehicles for sale
16
Sep 9, 2004 02:39 PM




