hi guys a ek coupe makin roughly 500-600 hp what size slicks would be best suited to run tens i was planing on buying lenso 13inche an m&h 23

 

24.5x9x13 mickey thompson!

 

thanks for the info but with the 9 will i have enough clearance

 

Yes. Just raise up your car.

 

You're gonna want the 9" wide.
It should fit.

 

covered many times. anything over 500 is the 24.5x9 or variant.
you will run out of gear with the 23"

 

+1

You could make a 26" work also. Gonna give your drivetrain hell though. lol

 

would 24.5/8/13 work just as good as the 24.5/9/13?

 

does it matter if i got skinnies in the back or oem wheels works just fine

 

i prefer skinnies cuz of the lighter weight

 

do i have to change my gears with the 24.5/9/13 or the stock ls gearing will work just fine

 

id go with gsr gearing.

 

the 24.5x8 is just a shade skinnier. you will be out but will benefit more from the 24.5x9

 

i would recommend gsr gearing but if ur making high power ls woud be fine too

 

Well i have the exact setup ur thinking of doing and they do work better than the 24.5x8-13... However they will rub the spindle on the narrow lenso's so u will need spacers and extended lugs or go with a wider wheel with a better back spacing...good luck! Hope my experience with this set up helps.. Mine are on an eg hatch btw dunno if that matters

 

thanks alot for the info man already have the extened lugs on but will certainly get the spacer

 

I want the best for street slicks what size ؟؟