PY ITR Track car part out... Mugen, Spoon,Benen
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 12,098
Likes: 1
From: blavica
PY ITR Track car part out... Mugen, Spoon,Benen
Track Car part out:
Motor Swap. B18C5 with JDM P30 pistons, worked head, Trans with ATS 4.9 FD, Hondata S300. Tuned setup makes 218 WHP on DynoJet. Tuned by John @ LHT Performance in Tampa.
Motor has JDM P30 pistons, Mugen oil pan and new bearings. Motor refresh was less than 1k ago.
Head has stage 2 Port and Polish and combustion chambers reshaped for the P30 pistons. Machine work was done by Dover Cylinder head in Orlando. Has Skunk2 Pro 1 cams, Supertech OEM type pistons (not flat faced, or oversized) Supertech valvesprings, Skunk2 cam gears. Head has around 10k miles on it from new, but machine shop work, hot tank and media blast was only 500 or so miles ago.
ITR head, stage 2 port and polish, Skunk2 Pro 1 cams, Skunk 2 cam gears, Supertech valves and valvesprings, new OEM retainers $1700 1600
Samco Intake Tube, cut short for Edlebrock IM/TB combo and Mugen intake $60
Toyo R888, one heat cycle Set of 4 $500
Edelbrock Performer X IM $250
Edelbrock 65mm TB $250
All items have price listed BEFORE shipping and paypal fee's.
Only trades I am intersted in are 97 ITR shell or SSBP and VMB Integra's
All prices are OBO, but low ballers will be ignored.
*** UPDATE *** New parts added.
AEM Cam gears - $125
Benen Tow hook, front - $40
B series head parts misc. Cam caps, girdles - Price depends on what you want
ITR CF ashtray surround. Not pictured but included is the ash tray - $50
Radiator fan - $50
BNIB ITR pistons, rings and wrist pins - $300 I believe these are .25 over so 81.25
Used PCT pistons - STD bore - $150 includes wrist pins and rings
PS pump, res and line - $150
Rear wiper motor and assembly - $75
Used ITR pistons - $100
Also FS but not pictured...
GS-R head
GS-R cams B-series Distributors
Misc B-series parts
Wiring harness that has been cut so I have plenty of sensors
P72 Rods and P72 pistons
10 Bolt GS-R diff with gear
All items OBO. Buy more than one thing and price may become more nego.
Motor Swap. B18C5 with JDM P30 pistons, worked head, Trans with ATS 4.9 FD, Hondata S300. Tuned setup makes 218 WHP on DynoJet. Tuned by John @ LHT Performance in Tampa.
Motor has JDM P30 pistons, Mugen oil pan and new bearings. Motor refresh was less than 1k ago.
Head has stage 2 Port and Polish and combustion chambers reshaped for the P30 pistons. Machine work was done by Dover Cylinder head in Orlando. Has Skunk2 Pro 1 cams, Supertech OEM type pistons (not flat faced, or oversized) Supertech valvesprings, Skunk2 cam gears. Head has around 10k miles on it from new, but machine shop work, hot tank and media blast was only 500 or so miles ago.
ITR head, stage 2 port and polish, Skunk2 Pro 1 cams, Skunk 2 cam gears, Supertech valves and valvesprings, new OEM retainers $1700 1600
Samco Intake Tube, cut short for Edlebrock IM/TB combo and Mugen intake $60
Toyo R888, one heat cycle Set of 4 $500
Edelbrock Performer X IM $250
Edelbrock 65mm TB $250
All items have price listed BEFORE shipping and paypal fee's.
Only trades I am intersted in are 97 ITR shell or SSBP and VMB Integra's
All prices are OBO, but low ballers will be ignored.
*** UPDATE *** New parts added.
AEM Cam gears - $125
Benen Tow hook, front - $40
B series head parts misc. Cam caps, girdles - Price depends on what you want
ITR CF ashtray surround. Not pictured but included is the ash tray - $50
Radiator fan - $50
BNIB ITR pistons, rings and wrist pins - $300 I believe these are .25 over so 81.25
Used PCT pistons - STD bore - $150 includes wrist pins and rings
PS pump, res and line - $150
Rear wiper motor and assembly - $75
Used ITR pistons - $100
Also FS but not pictured...
GS-R head
GS-R cams B-series Distributors
Misc B-series parts
Wiring harness that has been cut so I have plenty of sensors
P72 Rods and P72 pistons
10 Bolt GS-R diff with gear
All items OBO. Buy more than one thing and price may become more nego.
Last edited by Dave_B; Mar 7, 2011 at 06:31 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 12,098
Likes: 1
From: blavica
Re: Track car part out... Mugen, Spoon, Benen
I'll work on getting better pics and pics of everything soon.
Dealing with a wife about to have a baby.
Samco hoses are Black, used for what, maybe 100 miles? Not much, they were installed during the last build/tune up.
Dealing with a wife about to have a baby.
Samco hoses are Black, used for what, maybe 100 miles? Not much, they were installed during the last build/tune up.
Thread Starter
Honda-Tech Member
Joined: Aug 2004
Posts: 12,098
Likes: 1
From: blavica
Re: Track car part out... Mugen, Spoon, Benen
Suspension is PIC Select R3's with 12/14k rates. They will come with the rear LCA's as well, and I will not separate the set. Mileage is around 3k tops, all track use. No leaks or any issues at all.
