Hey guys,
I have an EK and I want to replace the stock steel wheels. Will a 14 x 6 (4x100mm) wheel from a 94 Mazda fit? I hear people bore the center for EGs, but I don't know if this is the case for an EK.

Here's the wheel. They look like Honda HX's. Offset is listed at 45mm.
http://www.finishlinewheels.com/MAZD...96/A-64755U20/


I'm also trying to keep the good tires. Will the 185/65/14 that I have now fit on this wheel?

Thanks!

 

EG/EK have identical hubs, so if it has to be bored out for one the same is true for the other.

 

But EGs are usually 13". Does wheel size come into play at all?

 

I believe you have to bore them out to 56mm or something like that.

But nice choice in Miata wheels, those are lighttt. Hollow spokes.

Edit - Matter fact, here's an archive! http://ht-archive.net/showthread.php?p=38748856

 

^ I think you're right. There's a 2mm difference. Could anyone give me insight about costs for bore?

 

Nope.