WV FT/FS 2004 EVO TB 448hp
Thread Starter
Honda-Tech Member
Joined: Apr 2010
Posts: 338
Likes: 0
From: keyser, wv
FT/FS 2004 EVO TB 448hp
Name: Randy Arnold
Phone:3042092219 text or call
State: wv
Zip 26726
Looking to maybe sell my evo 8 if i get the right price. I still owe bank 12k but am looking to sell for 19Kunless there is a trade involved then would only need the 12k to get title from them so I will have to probably let you use my tags and keep insurance on it. Only ONLY reason i am considering selling this is because i am being deployed next month and dont have a great place to store car.
Just had the full works done at CBRD for the 60k service:
New Headgasket (due to Pruven Performance installed headstuds)
pressure test
resealed oil pressure gauge fitting
new coolant
new drivetrain fluids
new turbo oil and water lines
new turbo drain fittings
Full 60k service (done a 64,000)
Dyno test at 29 lbs = 448whp and 375 wtq .This was on the CBRD Mustang "Heartbreaker2" dyno. Stock cars make around 220-230 I believe on this same dyno.
30k Service was done at AMS in gaithersburg MD.
Currently has 76,xxx miles on it.
I am open to reasonable offers!!!!
Here are all of the modifications on the car:
Engine:
Buschur 3065 cast kit with Tial Wastegate and slim fan
Buschur Race FMIC
Buschur UICP
Buschur LICP
Buschur Intake with Perrin Filter
Buschur CB (with bullet muffler)
Buschur bullet muffler test pipe
Optima Battery (4 Gauge ran to trunk for Battery)
Perrin DP
Synapse BOV (recirculated)
MIL Spec TB Seals
HKS 272I 280 Ex Cams
Mishimoto radiator
Brand New ARP Headstuds
HKS DLI
HKS oil cap
HKS radiator cap
Weapon R overflow tank
Ralliart Plug Wires
Perrin Fuel Rail
Buschur 880cc Injectors
Samcoe Radiator Hoses
SMC Alcohol Injection w/ M8 Nozel
AMS Tune @30lbs on alcohol
Perrin o2 Simulator
ARC Manifold Cover
CF Monster Sport Spark plug cover
CF Cam Gear Cover
Exedy Twin Plate HD Cluth(starting to get tough to put in 2nd gear)
Works Stainless Steel Clutch Line
Seibon CF Radiator Panel
STM radiator Brackets (anodized Black)
STM Valve Cover Polished Bolt Kit
Suspension:
TEIN FLEX
TEIN EDFC
Brembo slotted rotors
5Zigen FN01RC 18x9.5 w/ 255/35 40% tread left (finish is coming off)
Perrin 28mm rear sway bar
DC Sports from and rear titanium strut bars
Buschur Underhood Shifter Bushings
B&M Short Throw Shifter with metal bushings
Greddy Counterweight shift ****
Exterior:
Kaminari CF hood(finish coming off)
Rexspeed trunk lip
Seibon Rear Diffuser
Rexspeed Raliart (FQ400) mirrors
Perrin Shorty Antenna
Evo Dave Headlights blacked out headlights
AMS (Gaithersburg) Blacked out taillights
Interior:
AEM Digital Boost gauge
AEM Digital Oil Pressure Gaue
AEM didital wideband
ATI Column mount gauge pod
Eclipse AVN6610 with Sirius and Navigation (Antennas installed in 3rd brake light)
Python 990 Remote start and security (shock sensor, motion sensor and audio sensor)
I am the 3rd owner of this car and I love it. The interior is in great condition and exterior had a nose job done as you can see on pic and needs done professionally and just some scratches. I drove it 7 hrs to the beach so it is very reliable and have driven most days i have had it. I did very few mods to this car but guy before me did and he bought car off best friend and he took care of car also. It was his DD. I am not in a hurry to get rid of this car at all. Like i said i just have no place to store for a year and trust pretty much no one I know except my mom. I wont even let my wife drive it. If you are interested pm me or text. Money talks!! please no low *****.
Phone:3042092219 text or call
State: wv
Zip 26726
Looking to maybe sell my evo 8 if i get the right price. I still owe bank 12k but am looking to sell for 19Kunless there is a trade involved then would only need the 12k to get title from them so I will have to probably let you use my tags and keep insurance on it. Only ONLY reason i am considering selling this is because i am being deployed next month and dont have a great place to store car.
Just had the full works done at CBRD for the 60k service:
New Headgasket (due to Pruven Performance installed headstuds)
pressure test
resealed oil pressure gauge fitting
new coolant
new drivetrain fluids
new turbo oil and water lines
new turbo drain fittings
Full 60k service (done a 64,000)
Dyno test at 29 lbs = 448whp and 375 wtq .This was on the CBRD Mustang "Heartbreaker2" dyno. Stock cars make around 220-230 I believe on this same dyno.
30k Service was done at AMS in gaithersburg MD.
Currently has 76,xxx miles on it.
I am open to reasonable offers!!!!
Here are all of the modifications on the car:
Engine:
Buschur 3065 cast kit with Tial Wastegate and slim fan
Buschur Race FMIC
Buschur UICP
Buschur LICP
Buschur Intake with Perrin Filter
Buschur CB (with bullet muffler)
Buschur bullet muffler test pipe
Optima Battery (4 Gauge ran to trunk for Battery)
Perrin DP
Synapse BOV (recirculated)
MIL Spec TB Seals
HKS 272I 280 Ex Cams
Mishimoto radiator
Brand New ARP Headstuds
HKS DLI
HKS oil cap
HKS radiator cap
Weapon R overflow tank
Ralliart Plug Wires
Perrin Fuel Rail
Buschur 880cc Injectors
Samcoe Radiator Hoses
SMC Alcohol Injection w/ M8 Nozel
AMS Tune @30lbs on alcohol
Perrin o2 Simulator
ARC Manifold Cover
CF Monster Sport Spark plug cover
CF Cam Gear Cover
Exedy Twin Plate HD Cluth(starting to get tough to put in 2nd gear)
Works Stainless Steel Clutch Line
Seibon CF Radiator Panel
STM radiator Brackets (anodized Black)
STM Valve Cover Polished Bolt Kit
Suspension:
TEIN FLEX
TEIN EDFC
Brembo slotted rotors
5Zigen FN01RC 18x9.5 w/ 255/35 40% tread left (finish is coming off)
Perrin 28mm rear sway bar
DC Sports from and rear titanium strut bars
Buschur Underhood Shifter Bushings
B&M Short Throw Shifter with metal bushings
Greddy Counterweight shift ****
Exterior:
Kaminari CF hood(finish coming off)
Rexspeed trunk lip
Seibon Rear Diffuser
Rexspeed Raliart (FQ400) mirrors
Perrin Shorty Antenna
Evo Dave Headlights blacked out headlights
AMS (Gaithersburg) Blacked out taillights
Interior:
AEM Digital Boost gauge
AEM Digital Oil Pressure Gaue
AEM didital wideband
ATI Column mount gauge pod
Eclipse AVN6610 with Sirius and Navigation (Antennas installed in 3rd brake light)
Python 990 Remote start and security (shock sensor, motion sensor and audio sensor)
I am the 3rd owner of this car and I love it. The interior is in great condition and exterior had a nose job done as you can see on pic and needs done professionally and just some scratches. I drove it 7 hrs to the beach so it is very reliable and have driven most days i have had it. I did very few mods to this car but guy before me did and he bought car off best friend and he took care of car also. It was his DD. I am not in a hurry to get rid of this car at all. Like i said i just have no place to store for a year and trust pretty much no one I know except my mom. I wont even let my wife drive it. If you are interested pm me or text. Money talks!! please no low *****.
Last edited by evo500; Aug 21, 2010 at 09:59 AM.
Honda-Tech Member
Joined: Feb 2007
Posts: 573
Likes: 0
From: Columbia, MD
Thread Starter
Honda-Tech Member
Joined: Apr 2010
Posts: 338
Likes: 0
From: keyser, wv
Re: FT/FS 2004 EVO TB 448hp
