Ported and Polished JRSC, JRSC manifold, and plenum
Thread Starter
Honda-Tech Member
Joined: Aug 2006
Posts: 15
Likes: 0
From: Fresno, CA, USA
Ported and Polished JRSC, JRSC manifold, and plenum
Selling my JRSC kit. I just recently had it ported and polished by stiegemeier. They completely disassembled it, ported it and checked all the toerances and bearings. The rotors have been balanced as well. The charger has fresh oil and is ready to make some serious power. It has not been used at all since it has been ported.
http://www.stiegemeier.com/home.html
The manifold and plenum that comes with it is intended for an ep3 application but of course can be swapped for the k20a2 manifold if you can get your hands on one. Im selling the kit with the miscellaneous nuts and bolts that it came with, power card, 4.4 pulley, etc. It will not come with injectors or any form of engine management.
Because the blower, manifold ports, and plenum is ported and polished I expect to get more than the usual $1200-1600 for the jrsc kit.
Pictures:
Let me know if you're interested via pm...
http://www.stiegemeier.com/home.html
The manifold and plenum that comes with it is intended for an ep3 application but of course can be swapped for the k20a2 manifold if you can get your hands on one. Im selling the kit with the miscellaneous nuts and bolts that it came with, power card, 4.4 pulley, etc. It will not come with injectors or any form of engine management.
Because the blower, manifold ports, and plenum is ported and polished I expect to get more than the usual $1200-1600 for the jrsc kit.
Pictures:
Let me know if you're interested via pm...
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
