s366 turbo/evo8 turbo/1850cc inj
Thread Starter
Honda-Tech Member
Joined: Dec 2003
Posts: 24
Likes: 0
From: Gray, tn, usa
s366 turbo/evo8 turbo/1850cc inj
I have several parts I need to sell quick
First is a BW S300 66mm turbo has only 3k miles on it and is only a 3 months old. I bought it used from a guy using it as a test turbo at a school
It has no shaft play and has .88 a/r t4 open exhaust housing with john deere vband outlet. It is capable of 750-800whp.
It is over 1200 new. I am asking 775 obo.
Here is a pic of it compared to a FP3065
Next is two evo 8 turbos with the larger 10.5cm exhaust housing instead of the 9.8cm. One is brand new, one has 1500 miles on it. The new one was built by forced performance for me. They are twin scroll turbos and would be perfect for a v6 or v8 project looking to make 600-750whp with very quick spool. I will also include the flanges to use with your manifold. Those cost me 40.00 each. Asking 300 for the new one and 250 for the used one or 525 for both. I have two wastegates. The used one does come with oil and water line and the new one has the caps in it to keep dirt out. Both are perfect condition
Also have a set of 4 FIC 1850cc injectors I bought for 525 new I am willing to sale for 465.00. They have been installed for mock up and that is all. No Fuel ran through them.
First is a BW S300 66mm turbo has only 3k miles on it and is only a 3 months old. I bought it used from a guy using it as a test turbo at a school
It made 480whp @ 11 psi and 560 ft trq on a completely stock 2000 GT. The engine was stock from intake to pan. We did do a set of BBK headers.
The spool was really good it came in real hard around 2200 rpm. The data on the back pressure looked to fit the engine very nicely. When we tested the back pressure to the boost pressure it was 11 psi boost and 17 psi back pressure which 4 psi of it was after the turbo in the exhaust.
The spool was really good it came in real hard around 2200 rpm. The data on the back pressure looked to fit the engine very nicely. When we tested the back pressure to the boost pressure it was 11 psi boost and 17 psi back pressure which 4 psi of it was after the turbo in the exhaust.
It is over 1200 new. I am asking 775 obo.
Here is a pic of it compared to a FP3065
Next is two evo 8 turbos with the larger 10.5cm exhaust housing instead of the 9.8cm. One is brand new, one has 1500 miles on it. The new one was built by forced performance for me. They are twin scroll turbos and would be perfect for a v6 or v8 project looking to make 600-750whp with very quick spool. I will also include the flanges to use with your manifold. Those cost me 40.00 each. Asking 300 for the new one and 250 for the used one or 525 for both. I have two wastegates. The used one does come with oil and water line and the new one has the caps in it to keep dirt out. Both are perfect condition
Also have a set of 4 FIC 1850cc injectors I bought for 525 new I am willing to sale for 465.00. They have been installed for mock up and that is all. No Fuel ran through them.
Thread
Thread Starter
Forum
Replies
Last Post
