Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings.

 

Precision 1600cc Injectors 250.00 Shipped and Paypald ( SOLD to J. Mills )
2000 Civic Si Gauge Cluster 93,XXX miles 180.00 Shipped and Paypald
Skunk 2 70mm Throttle Body ( Has JB Weld On Idle Screw ) 100.00 Shipped and Paypald ( Sold Locally )
Precision 750 Intercooler and 3 inch aluminum piping for EK 600.00 obo shipped and paypald

 

Things for sale. Buyer pays shipping cost and Paypal Fee's

ITR Gearset, Has 250-300 miles on them. Upgraded my Gears and internals. Everything you see $600

http://img6.imageshack.us/i/dsc03829wu.jpg/

Omni Power Valvesprings $150
Omni Power Titanium Retainers $125
Omni Power Flat Faced Valves $175

http://img46.imageshack.us/i/dsc03830p.jpg/

ITR Throttle Body with TPS $150

http://img175.imageshack.us/i/dsc03838d.jpg/

 

I have for sale a 2001 Honda S2000 gauge cluster.
Asking 150 Shipped.

 

I have the following items for sale, please PM me if you would like to purchase any of the items listed below. Thanks

-Checking interest on my S372R, just had a new race cover and wheel installed by Bulls-Eye Power. Looking for $1000
-F22 with OBX LSD (LSD has all hardware replaced and upgraded) $550 shipped
-H22 Stock Cylinder Head $200 shipped
-H22a4 Block with crank (crank needs to be turned) $250 shipped




Shipping is for the continental US 48 states

 

Crower I Beam connecting rods for b18c
these guys are brand new, just been sittin for a while.
retail is $760
$500 obo
text for pics 4404528759



4340 Steel Billet Connecting Rods
When it comes to connecting rods...Crower is the Sport Compact industry leader. Other's have attempted to cash in on Crower's success by offering a cheaper rod made in China, but the fact remains, if you're running a forced induction, nitrous, high rpm or all of the above Honda/Acura engine...you need Crower's Premium Steel Billet connecting rods. Features include premium USA manufactured steel alloy, proven I-beam design intended for high horsepower applications, 220,000 psi Crower rod bolts that are stronger than ARP, tolerances to .0001", and system matched sets to .5 grams total weight.

 

NX nitrous express 10lbs bottle with gauge and manifold, and custom mounting brackets $100 shipped


blox front camber kit EK 96-00 civic $100 shipped PENDING SALE


EK9 civic type r rear hatch wing fresh tafeta white and base gloss black paint $400 shipped


ej1 eg6 92-95 civic pillar with 2 gages autometer pro comp water temp and oil press gauge no sensors. $80 shipped


auto to manual conversion pedals and lines set comes with all pictured $150


greddy boost controller remote swith assembly $80 obo


methanol 4qt tank $100 obo


EK 96-00 spoon style power mirrors painted tafeta white and base painted gloss black $60 shipped


JDM EP3 Oem red badge steering wheel I had this on my 99 civic hatch, so it will fit 96-00 civic , maybe older models in excellent condition working air bag (bonus steering wheel clock spring to match airbag) $370 shipped


EDM center console, cup holder, and JDM shift boot $55 shipped


96-00 civic mirror cap OEM tweeters. $55 shipped


ASR rear sway bar kit complete $300


seat rails modified integra rails to fit 96-00 civics

$200 or best offer

96-00 civic parcel shelf $80

 

About to start parting out the race car and here are the first batch of items for sale. Please keep in mind prices are plus shipping, (add 3% if paying by paypal)
PM for any questions. Thanks, Paul

Weld Magnum 13x8" 4x100 with m&t 24.5x9x13 slicks with only 8 passes down the track. Rims are in Ok condition as you can see in the pics. Will include lugnuts with purchase. $700

Bogart 13x8 4x100 fly stars fronts that are BRAND NEW in the box. Only been opened to take pictures. Matching rear 15x3 4x100 rear skinnies BRAND NEW in the box also. Will also include lugnuts for both front and rear with purchase. $SOLD$

DSS stage 5 axles from about 4 years ago. They are BRAND NEW in the box and never been used. Only been opened to take pictures. They include the axles, hubs, lugs. $SOLD$

I also have a USED set of the exact same DSS stage 5 axles that will include axels, hub assembly (so that you don't have to press in the new hubs, it would be plug and play), extended lugs for $SOLD$. They were used on my race car for approximately 50 passes.

 

Sparco speed seat (black) fairly new sat in maybe 4 times..... 150.00 obo+ shipping

Sparco fighter seat all black with back pads (black) great condition ......350.00+ shipping

B16 head completely stock .................................................. ..........350.00 + shipping
prices are negotiable... Must sell by the end of the week!!! i do not have room for this stuff anymore!!

 

.90 divided housing for BW S372 High temp coated black. $make offer

 

full-race front mount turbo manifold. dual 44 gate outlets. t4 flanged.
$1050

s372r. race cover. double bore front wheel ($200extra). 87mm turbine wheel ($300extra)
3" vband compressor outlet, 4" vband exhaust outlet
$1200




1000hp air-water intercooler, meizer pump, and water tank setup
$1000



Turbosmart 50mm Pro-Gate BNIB
$450



slightly used eagle rods and arias pistons combo. gsr stroke, 81mm bore. $500.

 

A1000 Barely used ran out of fuel on dyno so replaced with eliminator $300


Brand new bosch 044 with 6an fittings and check valve $200


Brand New Polished golden eagle bseries fuel rail $100


Barely used 3qt accusump with electronic valve and switch $350


Brand new Autometer water temp gauge $45


Brand New endyn Pistons for d16 78mm bore $400



Brand new s372r .90 ar backhousing $125


brand new set of 4 eagle d16 rods and 3 d16 used singles $300 for the set or $50 per used rod


2x sets of gold lensos brand new never had tires or been mounted $320 per set


barely used rear skinnies with tires 3.6x24x15 $460


Brand new JG intake manifold for bseries $250


Used H22 Comp twin disc works but could be rebuilt$700


All items are Obo pm for more pics

 

For Sale- Posting This For A Friend

Ported GSR Head With Full Ferrea Valve Train. Head has been ported by Headgames in NJ has Standard size stainless steel valves. Dual Springs with lower seat locator, Titanium retainers and upgraded locks, bronze guides. Head has been cleaned up and is ready to bolt on. Pics upon request. PM or Email Juice2435@aol.com
ASKING 1500 Plus shipping and paypal fees.

 

Catch can setup for sale...Bolts to a 96-00 civic driver side wheel well. It holds about a gallon and is baffled with 2 filters. It has 3 -8 ports on top that are where the AC dryer cylinder would usually be. I have 2 of the ports connected to the valve cover. Im selling the custom can with valve cover and lines to connect it.
$350.00

Pic doesn't show the filters in place because this was during fabrication...but there are 2 side by side, the same size as the "standard" catch can setups out there. It has a drain plug at the bottom.



GSR B18C1 JE Pistons (NEW IN BOX) PN# 176449
Stock Bore (81mm) 10.0:1 RINGS INCLUDED
Asking Price: $450.00 OBO

 

I DON'T WANT THIS ANYMORE.

I paid $1800 for this shell back in 07'
now I'll let it go for $1500 in the same condition I got it.

1pc fiberglass frontend (small crack)
fiberglass doors
1pc rear end
Roll cage. (no cert sticker on it, don't know if it was in the past)
still have the old plexiglass windows. They are foggy and be better used as templates to make new ones.

WILL NOT SELL JUST THE DOORS or FRONT END. Take it all.
located in Yakima,WA area (zillah,wa 98953)



More pics here: http://hondamarketplace.com/showthread.php?t=2701120

Will also concider trade for a full set of slicks front & skinnies.

 

Rps carbon B series clutch ,JUST freshened, like new ,100 % complete 1200$

 

98 ITR head, supertech exhaust valves, ITR intake valves(5k ago, new from honda), supertech valve springs, new valve stem locks, cam caps, gsr cams, valve cover, decked once while getting rebuilt- 1000 obo






s2000 (itr)throttle body, (tps is flipped) 120



hondata 4 bar map sensor- 80



obd2 dizzy, less than 2 hours use- 100 bucks(dist king) worked fine for 480whp
MSD black wires, 60(new like distributor)




2 obd1 non vtec ecu's, one is pre de sadured, other is stock



b16 arp head studs, torqed once, 60, comes witl all washers and nuts



GM boost control solenoid and pig tail, 60

 

Integra Part Out

I have decided to part out the integra, i am going a different route with a different chassis, so i begin to part out the build. Everything has less then 5 miles, the components have never seen any power, as i just ran the car and never got a tune on the car. I have a lot of people that can vouch for me and my parts. Rob Morse @ TPR Tony palo @ T1racedevelopment Fernando Reyes @ Kings Performance. Please message me for any offers, and only serious offers. Everything here is of high quality, so i wont accept any low *****.
You can also contact me through email cnaylor161@gmail.com
thanks a lot. I accept paypal, shipping and paypal fees will be applied.

Some Pics














T1 Ultimate Ignition Kit. Comes with M&W ignition box with harness, CBR coils, T1 cam trigger sensor, and golden eagle Exhaust cam gear. 1600 OBO

Full race traction bar 250

TPR short block
Specs:
B18B1 Bottom end
ERL darton MID sleeves
CP pistons
CP Rings
Manley turbo tuff rods
Calico coating on pistons
align hone engine block
Cylinder hone
ERL 5 point main girdle
ARP main studs

4000OBO

Precision billet 6768 with .96 AR exhaust housing NON ball bearing
1300OBO

1 precision 46mm wastegates 290

Motec M400 with Motec Milspec T1 M800 race spec harness - 5000

Koyo radiator with -16 welded bungs with top of radiator welded off with the lines and fittings 2 90 and 2 straight fittings.
600

T1 Catchcan divided into 3 parts coolant fill, overflow, and breather system. Comes with -4 line with fittings. all -10 lines for valve cover and back of block with the freeze plugs on block and -12 coolant line and fitting
800

T1 intercooler with 3 inch intercooler piping to fit dc2 integra and also will fit an EG, the intercooler piping routes through the engine bay, not through any chassis holes.

800 OBO

AEM similar electronic boost controller - 70

Avid solid mounts for DC2 integra - 350

Oil filter sandwich plate for turbo feed line and Lsvtec line - 80

-4 turbo feed line with nylon sleeve over the line - 90

-10 black nylon oil return line with about 2 feet of line 50

Moroso 5.5 quart oil pan with Moroso oil pickup 300

1995 Integra GSR shell. Has sunroof and power everything, car does not have seats other than a tan DC2 driver and passenger seat. sunroof. No rust, painted berlina black. Side moldings have been deleted. Fully shaved bay painted candy gold. if you have any questions please message me more.

1800

I may have left other things out, if you would like to see pictures i can email you those, again everything from this part out has VERY VERY low miles less than 5 miles it all.

 

Name:Chris Martin
Location:Roanoke,VA
Contact: PM here
Price:$various.Shipping not included.
PICS BELOW LISTINGS

-Autometer gauges/pods.
SOLD: 2-5/8" Boost gauge
$35: 2-1/16" A/F gauge
$25: OEM A-pillar,with pods attached,dyed black.Couple scratches in dye as seen in pic,but overall very good shape.92-95 Civic coupe/hatch

-Clutch Specialties dual diaphragm pressure plate with sprung brass puck clutch.B series hydro.I ran this clutch for less than 3k miles on my low boost setup,with the intention of using it on my new engine,but I never completed it.CS doesn't really have stages or anything,as they build each clutch to what you need.I told them I needed a clutch for street/strip use in a 500WHP car on slicks,and this is what they sent.Worked great on the street,very driveable.
$225

-Tuner Toys oil take off block.For back of block to get oil feed.BRAND NEW!
$20

-Coolant line kit for GT turbo.These are the fittings and line you’ll need to build a coolant line kit for a GT turbo. 7’ of -6 line,and the necessary fittings to connect to the turbo and terminate to wherever on your engine you pick up and return coolant.You’ll just need two fittings to plumb in to whatever source you choose.Paid $136 total.Brand new.
$60
WILL sell any individual parts also.

-Momo steering wheel adapter hub for 92-95 Civic,94-01 Integra.Includes horn sweeper arm and rubber cover boot.
$45 for Momo hub

Autometer



Clutch SPecialties


Oil T fitting


AN coolant lines

 

Msd DIS 2 HO 62113 used $300

Nx wet system solenoids have all been rebuilt by nx comes with
10lb bottle with pressure gauge, dynotune blow down tube, dynotune bottle heater
purge
16ft nitrous line
shark nozzle
msd digital window switch
nx tps switch
$575

 

F22 Vtec Accord Drag turbo kit for sale. $1599. This kit was ran for 2 heat cycles and pulled around my house, where it sat for a couple of years. The pipes are a little rusted adn nee to be blasted and painted or even replaced. The 57 trim Turbonetics turbo was just refreshed by supernatural turbo, so it is like brand new. It has a tial 35mm wastegate, Greddy BOV, Vortec FMU, and Drage front mount intercooler.


AEM fuel rail and regualtor-$150

Fluidyne regulator with electric fan. probably fit prelude as well: sold for $600 new, i'm letting it go for $300

 

Please PM for pics, Same day shipping is available. paypal, Visa, or mastercard.

92/95 EG 1 Piece Fiberglass frontend Mounted Only, Never Ran (PICK UP ONLY) $500
EG front bumper with custom aluminum .080 air dam, (PICK UP only) $200
Fluidampr Street Balancer b-series (Used one season) $200
Civic 03/04 PNF ECU (Virgin) $150
RC 1600CC used 1 season $300, spare set new $400, or both for $600
RCI 3 Gal Fuel Cell $130 BNIB
RCI 1 Gal Fuel Cell $100 BNIB
ZEX 10lb Purple Nitrous Bottle USED $115
Edelbrock victor x intake manifold GSR bored to 70mm USED $250
Turbo XS MBC 2 stage USED $100
Tuner toys billet map adapter USED $15
B series T4 Divided Twin Scroll Top Mount Manifold Tial 44mm flanges (made 875whp at 35psi) USED 2 months $600
Quaife B-Series Gear Set 4.75 Final Road Racing/Auto Cross Gear Set Complete (no reverse) USED $1300
B Series Ram Horn Manifold On Dyno 3 hours Only $500
Haste 3 Row Civic 92-00 All Aluminum Radiator USED $200
88-00 Rear Camber Kit BNIB $75
Skunk2 Lowering Springs (2) Springs Honda/Acura P/N # 519.05.1550 USED $40
Fel Pro Intake Gaskets $8 each BNIB
Walbro 255lph Pump GSS342 BNIB $80!!
Wheelie bars off Eggums old car USED $300
B&M Oil Cooler with -10an Fittings $50
AEM UEGO 30-4100 BNIB $175
DC Sports K-Series Race header (stainless, full length) $300
RC1600CC NIB set of 4 $495
AEBS GSR Head Stud Kit BNIB $125
B18B Eagle Rods with 84mm JE Pistons p/n 185917 (20 passes) $500
Moroso B Series Race Pan , oil pickup needed BNIB $375
EG Drivers Side headlight Induction Box - Powder Coated Black
Square Coolant Can - Powder Coated Black

 

SOLDDD!!

 

aem twin fire and aem pencil coils make offer

aem ems for obd2 already setup for coil on plug with a few h22 turbo programs in it $700

ferrea roller rocker setup for h22 with h22 all motor roller cams mint like new $1500 or just sell cams seperate( pm for cam card)

2-24.5x8.5x15 m&h slicks lots of meat left work good 200 bux

2- 15"x7" rota sub zeros flat black look new 5x114.3 very light weels 200bux

2- 205 50 15 mickey thompson et drag radials basically brand new used for 1 day of photo shooting (not 1 burn out on them) 200 bux
5x114.3 bogarts slicks and skinnys plenty meat left sell all for $1000
full msd setup will sell cheap blaster2 coil 6al msd wires etc

_t3 t67ho turbo 82 back housing no probs at all make offer___
zex dry nitrous kit mint 250 bux
misc stock h22 stuff pm with needs_________

 

Tial/garrett custom 72mm billet gtx-r 42r turbo...... Comp Wheel and cover have 3 dyno pulls on them... Exhaust and center section are brand new....Mint

Make me an offer and its yours...