Anyone know or have a link to a guide of a tranny removal for a BB4 Prelude???

Cheers....

 

Give this a while to load.. it's for a clutch install but same thing. This picture link should be thrown into the FAQ since last time I looked all the threads had dead pictures... maybe that's changed.

Picture link:
http://img199.imageshack.us/img199/1...bigpicture.png

It looks like it's a tiny bit out of order around the starter removal, but all the steps are there. It's pretty easy to tell which picture goes to what. (at least for me...)

 

Thanks mate,thats an invaluable link there,much appreciated

 

Just skimmed through that--looks to be right out of the manual.. I will say, though, that when I dropped/swapped my transmission, I did not have to remove the downpipe.

 

^ Oh, true! I didn't know if that applied to 5th gens or SH only, or what so I left it on there. But I definitely did NOT have to either on my 4th gen.

 

From all the cars I have done clutch or trans work on, even the SH, the exhaust can stay in place. the ATTS unit can be maneuvered around it.