i don't have the 440cc injectors yet but can i do the hack with the factory injectors? thanks...1

 

No!!!

 

Hahahhaha are you crazy?

 

WHY would u want to. -40% on stock injectors oh wait IM NOT GETTING VERY MUCH FUEL

 

of coursre you can w/ factory injecotrs. DSM 450cc w/ resistor box

 

no, the factory injectors are 2 small.

 

go ahead and give it a try.......................let us know the results

 

Yup, you take your VAFC and set it to 100% across the board and you don't run any more than 1 psi of boost.

 

Harsh guys, harsh.

Do a search to read how it works. You're actually reducing the fuel supplied when you use the afc hack, but you aren't running lean because the injectors are huge compared to stock. if you didn't have the larger injectors you'd just be running lean as ****.

 

i meant with instead of -40 at -5...i have it at -5 across the board as it is now...

 

The hack works buy reducing the map signal enough so that when you boost it doesn't trip a CEL. The 40/35% cut happens to be a happy medium for reducing the MAP signal AND cutting enough fuel from 390-450cc injector to idle and boost a Honda nicely. Cutting the fuel 40% will allow you to boost on your stock map, but you engine will blow because your have no fuel.


[Modified by speedymon, 10:01 AM 9/16/2002]

 

I don't think someone is reading the posts on the AFC hack/trick ....

 

I don't think so either...

 

sure it will work perfectly, all you have to do is get a fpr and turn the psi to 180, no biggie. i dont know why the even make bigger injectors, just turn up the psi

 

Blown O rings are kewl!

 

now i finally see how it works...thanks