I need some one to walk me trough an msd sci intallation on a 96 h23A1.I've tryied and tryied and I don't know where the white and red wire goes.I'm also trying to use a Blaster SS Coil.

 

http://www.hondaprelude.to/install_msd.html

to get you started...

 

You need to splice 2 wires onto the one red wire, then put crimp-on tabs on the end of each of the 3 wires (2 from the red, and the white).....unplug the harness from your stock coil, there will be 4 slots on the harness (3 that have connectors in them.....position the coil harness like this:
----------------------
| ----- | ------- |
|----------------------
| | ------- |
-----------------------

the red wires plug into the top 2, the white wire tab plugs into the bottom right one, and the lower left one is empty....
Hope that helps!
BRian