july fs sticky
Thread Starter
Mr. Badwrench
Joined: May 2002
Posts: 14,146
Likes: 2
From: stranger in a strange land
july fs sticky
Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 1-1-2010, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good.
1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.
We will delete any BS we feel does not belong in here
Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.
From this point on, 1-1-2010, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good.
Honda-Tech Member
Joined: Nov 2004
Posts: 820
Likes: 0
From: conway, ar, us
Re: july fs sticky
sorry some of the pics aren't great. I do not have a digital camera so these were taken with my cell phone. Also the room i took the pics in doesn't have the best lighting.
2 b18/ls eagle rods, arp 2000 5/16 rod bolts Good condition --- 80 shipped each
1 b18/ls eagle rod, arp 2000 3/8 rod bolts Brand new! Bought as a replacement rod and was the the wrong one(big bolts) --- 80 shipped
set of gsr cams, not sure what these go for, good condition --- 150 shipped
b-series t4 divided topmount manifold, flanged for dual 44 wastegates, Very similar to full-race! I haven't had any problems with this manifold cracking or anything else like that. I do not know what brand it is cause the guy i bought it from didn't know either. My motor dropped two valves and pieces went through the turbo and ruined it. I will not need this for a while and could use the money to build a completely new engine and rebuild the turbo. --- 900 shipped obo
Crower stage 2 turbo cams, BNIB, I've had these for a long time and just never got to use them. Now i need the money much more to completely rebuild my engine since it dropped two valves. --- 450 shipped
b18c/gsr block, bare, freshly bored/honed to 83mm, golden eagle blockguard, Had some pistons i was going to throw in this for an all motor build and never got around to it. Ready to throw your rotating assembly in and go! --- 400 obo I will have to check on shipping.
2 b18/ls eagle rods, arp 2000 5/16 rod bolts Good condition --- 80 shipped each
1 b18/ls eagle rod, arp 2000 3/8 rod bolts Brand new! Bought as a replacement rod and was the the wrong one(big bolts) --- 80 shipped
set of gsr cams, not sure what these go for, good condition --- 150 shipped
b-series t4 divided topmount manifold, flanged for dual 44 wastegates, Very similar to full-race! I haven't had any problems with this manifold cracking or anything else like that. I do not know what brand it is cause the guy i bought it from didn't know either. My motor dropped two valves and pieces went through the turbo and ruined it. I will not need this for a while and could use the money to build a completely new engine and rebuild the turbo. --- 900 shipped obo
Crower stage 2 turbo cams, BNIB, I've had these for a long time and just never got to use them. Now i need the money much more to completely rebuild my engine since it dropped two valves. --- 450 shipped
b18c/gsr block, bare, freshly bored/honed to 83mm, golden eagle blockguard, Had some pistons i was going to throw in this for an all motor build and never got around to it. Ready to throw your rotating assembly in and go! --- 400 obo I will have to check on shipping.
Honda-Tech Member
Joined: Jul 2006
Posts: 651
Likes: 0
From: Pawtucket, RI, USA
Re: july fs sticky
Drag civic, would be a great index racing car. main thing the firewall has been replaced with steel
car comes with stock front suspension and brakes
still has one piece front end, all lexan, wheelie bars, custom motor mounts and midplate,
also has straight axle in the rear.
wheels not included
3000
car comes with stock front suspension and brakes
still has one piece front end, all lexan, wheelie bars, custom motor mounts and midplate,
also has straight axle in the rear.
wheels not included
3000
Honda-Tech Member
Joined: Jan 2004
Posts: 11,129
Likes: 36
From: GO AUTOWORKS DOT COM
Re: july fs sticky
FS but all in PERFECT working condition.
-D16Z Comp 59500 cam w/ AEM silver cam gear (r adjusment bolt cam gear)
- ACT HD D Series Clutch
(still have the box, will add the part #)
-Bullseye Power S262 .70 a/r (same turbo as the S362 w/ the smaller 200 series compressor cover)
-Blue Tial 44MM wastegate and Blue Tial 50mm BOV. The wastegate does have a minor scratch on one side)
Will add photos of all.
-D16Z Comp 59500 cam w/ AEM silver cam gear (r adjusment bolt cam gear)
- ACT HD D Series Clutch
(still have the box, will add the part #)
-Bullseye Power S262 .70 a/r (same turbo as the S362 w/ the smaller 200 series compressor cover)
-Blue Tial 44MM wastegate and Blue Tial 50mm BOV. The wastegate does have a minor scratch on one side)
Will add photos of all.
Honda-Tech Member
Joined: Aug 2000
Posts: 4,232
Likes: 1
From: Alabaster, Al, USA
Re: july fs sticky
Fluidyne radiatorw/fan for 97 Accord. Will probably fit Preludes and others as well. This radiator was put in an Accord about 2 years ago. It went through one heat cycle and the car has sat behind the house since then, so it is pretty much new. It sells for $500 new. I will let it go for $300.
Tilton 3/4" clutch master kit for Civic/Integra-$100
97 Accord F22 AEM fuel rail and regulator-$150
Brand new Stroud custom window net. dimensions 10" from left to right, back up and down is 17" and front up and down is 21" not including the buckles. The buckles are about 3" and include a weld in tab. I just paid $115 for this thing, but I need the dimensions to be a little different. Make a resonable offer.
Tilton 3/4" clutch master kit for Civic/Integra-$100
97 Accord F22 AEM fuel rail and regulator-$150
Brand new Stroud custom window net. dimensions 10" from left to right, back up and down is 17" and front up and down is 21" not including the buckles. The buckles are about 3" and include a weld in tab. I just paid $115 for this thing, but I need the dimensions to be a little different. Make a resonable offer.
Trending Topics
Honda-Tech Member
Joined: Feb 2005
Posts: 123
Likes: 0
From: La Guarucha, Michoacan, MEX
Re: july fs sticky
I have a very clean set of bogart with tons of tread left on the tires. Wheels are very well taken care of as i am the second owner of this set. The slicks on the front rims are M&H 8.0/23/13 and the tires on the rear skinnies are 15 inch DOT M&H's so you can run them Legally in the street class if you choose. Shipping is possible if buyer pays for it. $1,200. Lug nuts also included.
Honda-Tech Member
Joined: Jun 2006
Posts: 1,371
Likes: 0
From: Macon, Ga
Re: july fs sticky
Here is a nice selection of parts and a couple of nice cars. I need to clear out some of these items to put money towards my next project. Please feel free to pm questions. We can take credit card. Shipping can be added and will be quoted as needed. Delivery of the cars or trailer can be arranged. Will be adding more items and pics so feel free to check back soon. Thanks for looking 
First the vehicles:
DC2 Chassis:$2500
This is the single cam Integra from 2009. It has been converted to manual steering, has an RS roof skin(removed about 40 lbs), among other weight saving mods (i.e. insulation, sound deadening removal, etc).
10 point cromoly roll cage with parachute handle mount bar in ceiling. Cage can be certified for an extra $150. Set up for H/F series.
Carpet, headliner, dash, and interior plastics included.
Front coilovers with adjustable KYB struts. The same setup from the Hot Rod which did 1.4 60’s.
Traction bar.
JJSPEC Racing's 1995 Honda Civic Hot Rod Chassis(Race Car, VIN N/A) $2700:
Chassis only. Comes with:
Chromoly 12 point cage certified until 2010 with parachute mount wheelie bar mounts[/FONT][/size][/color]
1 piece rear axle setup that will accommodate factory or aftermarket brakes
Spare tire well removed and replaced with Aluminum
Eibach Springs Rear
Competition Engineering rear shocks
1 piece MB Products fiberglass front end
MB Products trunk lid
Lexan windows
Lightened Factory doors
Cromoly Wheelie Bars
24 foot enclosed trailer. This is a great unit for hauling your race/show car. Has extra height roof, wide side door that you can bring a four wheeler through. Has some minor damage on R/F and R/R. Comes with a weight distribution hitch($400 value) and spare wheel(needs a tire). Paid $6500 new, asking for $4200:
Wiseco Pistons PN#6566M81 B Series 81MM High Compression. Around 11.5-1 depending on head, head gasket thickness, etc. Around 1000 miles. $250:
H22 Killian's porting head w/BC springs/retainers. $1000
BC H22 Stage 3 Turbo Cams $325
H22 Intake Manifold(manifold only. Fuel rail, tb and other items not included but for sale also) $250.
BDL H22 Fuel rail(see above photo) $75
BDL 72mm throttle body(see above photo) $250
H22 CC Twin Disc. Comes with 2 new discs. $1000 Flywheel has a few passes on it now, but still in good shape.
H22 Trans w/ Quaife diff(recently rebuilt by Quaife) $750
H22 Trans w/ welded spider gears. This was a spare unit to be installed in between rounds when there was not enough time to put the LSD in another trans. There is no picture but will get one if you need one. Looks like a stock tranny on the outside. $300
DSS 5.9 Axles for H/F in a Civic/Integra $1200. This system retails for more than $1800. Will come with DSS CM intermediate shaft.
Only pic I currently have(showing comparison between stock and 5.9 outer joint):
Kirkey drag seat(race car not included) $75
Halon Fire Supression System:$350
Safecraft LT10AAB. This system comes with a pull style cable for activation. Pic is a sales photo. Can get a pic of the system if you need it.
Used Aeromotive Eliminator pump $300 (this pic is of an A1000 but it looks similar to the Eliminator):
Precision liquid to air intercooler setup with tank and in tank pump. Can have custom ends welded on for fee if needed. $SOLD
Bullseye Power S374 w/race cover(Manifold not included) $SOLD
H22 forward facing exhaust manifold with dual 38 v band flanges. Puts a S37x compressor housing in front of the rad support of a DC2 $600:
One more pic with turbo above^^^
Weld Wheels 13 inch fronts 15 inch skinnies for the rear $SOLD
GReddy Kit for D-Series. Complete with everything including fmic. Does not have engine management. Came off of my personal car for upgrade $SOLD
First the vehicles:
DC2 Chassis:$2500
This is the single cam Integra from 2009. It has been converted to manual steering, has an RS roof skin(removed about 40 lbs), among other weight saving mods (i.e. insulation, sound deadening removal, etc).
10 point cromoly roll cage with parachute handle mount bar in ceiling. Cage can be certified for an extra $150. Set up for H/F series.
Carpet, headliner, dash, and interior plastics included.
Front coilovers with adjustable KYB struts. The same setup from the Hot Rod which did 1.4 60’s.
Traction bar.
JJSPEC Racing's 1995 Honda Civic Hot Rod Chassis(Race Car, VIN N/A) $2700:
Chassis only. Comes with:
Chromoly 12 point cage certified until 2010 with parachute mount wheelie bar mounts[/FONT][/size][/color]
1 piece rear axle setup that will accommodate factory or aftermarket brakes
Spare tire well removed and replaced with Aluminum
Eibach Springs Rear
Competition Engineering rear shocks
1 piece MB Products fiberglass front end
MB Products trunk lid
Lexan windows
Lightened Factory doors
Cromoly Wheelie Bars
24 foot enclosed trailer. This is a great unit for hauling your race/show car. Has extra height roof, wide side door that you can bring a four wheeler through. Has some minor damage on R/F and R/R. Comes with a weight distribution hitch($400 value) and spare wheel(needs a tire). Paid $6500 new, asking for $4200:
Wiseco Pistons PN#6566M81 B Series 81MM High Compression. Around 11.5-1 depending on head, head gasket thickness, etc. Around 1000 miles. $250:
H22 Killian's porting head w/BC springs/retainers. $1000
BC H22 Stage 3 Turbo Cams $325
H22 Intake Manifold(manifold only. Fuel rail, tb and other items not included but for sale also) $250.
BDL H22 Fuel rail(see above photo) $75
BDL 72mm throttle body(see above photo) $250
H22 CC Twin Disc. Comes with 2 new discs. $1000 Flywheel has a few passes on it now, but still in good shape.
H22 Trans w/ Quaife diff(recently rebuilt by Quaife) $750
H22 Trans w/ welded spider gears. This was a spare unit to be installed in between rounds when there was not enough time to put the LSD in another trans. There is no picture but will get one if you need one. Looks like a stock tranny on the outside. $300
DSS 5.9 Axles for H/F in a Civic/Integra $1200. This system retails for more than $1800. Will come with DSS CM intermediate shaft.
Only pic I currently have(showing comparison between stock and 5.9 outer joint):
Kirkey drag seat(race car not included) $75
Halon Fire Supression System:$350
Safecraft LT10AAB. This system comes with a pull style cable for activation. Pic is a sales photo. Can get a pic of the system if you need it.
Used Aeromotive Eliminator pump $300 (this pic is of an A1000 but it looks similar to the Eliminator):
Precision liquid to air intercooler setup with tank and in tank pump. Can have custom ends welded on for fee if needed. $SOLD
Bullseye Power S374 w/race cover(Manifold not included) $SOLD
H22 forward facing exhaust manifold with dual 38 v band flanges. Puts a S37x compressor housing in front of the rad support of a DC2 $600:
One more pic with turbo above^^^
Weld Wheels 13 inch fronts 15 inch skinnies for the rear $SOLD
GReddy Kit for D-Series. Complete with everything including fmic. Does not have engine management. Came off of my personal car for upgrade $SOLD
Last edited by jjspec; Jul 15, 2010 at 04:14 PM.
Honda-Tech Member
Joined: Jul 2003
Posts: 3,831
Likes: 0
From: Houston, USA
Re: july fs sticky
EVERYTHING IS BRAND NEW, NEVER USED
Custom Web Cam 260 duration @ .050 with .485 lift Turbo Profile - $500
B16A hydro transmission..freshly rebuilt (new bearings, synchros 3/4 gear) Quaife LSD - $1,500
-10an hose ends and 10ft of hose - $200
valve cover with 2 -10an bung and the cam gear cover completely cut off - $120
powder coated domant purple vc with 2 -10an bungs..one is stripped - $120
1993 civic hatch
Fully painted inside/outside sebring silver off s2000
All new moldings/ caps/bolts/ etc
Apexi n1 99 spec susp
Subframe, lca, rear engine T bracket powder coated extreme chrome
Walbro intank wired with direct 12v
Gsr brakes front/rear with braided lines
All brakes lines have been tucked to the cabin side of the firewall
Benen tie bar and function7 lca’s
Spoon replica mirrors
extended arp studs all around
GSR fat fives with decent tires included
NO seats
here is the build thread for the car https://honda-tech.com/forums/appearance-build-threads-122/vietjdmbois-eg-hatch-build-thread-2212864/
ASKING PRICE - PRICE DROPPED $4,000.00
Custom Web Cam 260 duration @ .050 with .485 lift Turbo Profile - $500
B16A hydro transmission..freshly rebuilt (new bearings, synchros 3/4 gear) Quaife LSD - $1,500
-10an hose ends and 10ft of hose - $200
valve cover with 2 -10an bung and the cam gear cover completely cut off - $120
powder coated domant purple vc with 2 -10an bungs..one is stripped - $120
1993 civic hatch
Fully painted inside/outside sebring silver off s2000
All new moldings/ caps/bolts/ etc
Apexi n1 99 spec susp
Subframe, lca, rear engine T bracket powder coated extreme chrome
Walbro intank wired with direct 12v
Gsr brakes front/rear with braided lines
All brakes lines have been tucked to the cabin side of the firewall
Benen tie bar and function7 lca’s
Spoon replica mirrors
extended arp studs all around
GSR fat fives with decent tires included
NO seats
here is the build thread for the car https://honda-tech.com/forums/appearance-build-threads-122/vietjdmbois-eg-hatch-build-thread-2212864/
ASKING PRICE - PRICE DROPPED $4,000.00
Last edited by vietjdmboi; Jul 23, 2010 at 07:46 PM.
Honda-Tech Member
Joined: Mar 2004
Posts: 7,913
Likes: 0
From: North Georgia/Atlanta
Re: july fs sticky
Catch can setup for sale...Bolts to a 96-00 civic driver side wheel well. It holds about a gallon and is baffled with 2 filters. It has 3 -8 ports on top that are where the AC dryer cylinder would usually be. I have 2 of the ports connected to the valve cover. Im selling the custom can with valve cover and lines to connect it.
$350.00
Pic doesn't show the filters in place because this was during fabrication...but there are 2 side by side, the same size as the "standard" catch can setups out there. It has a drain plug at the bottom.
GSR B18C1 JE Pistons (NEW IN BOX) PN# 176449
Stock Bore (81mm) 10.0:1 RINGS INCLUDED
Asking Price: $450.00 OBO
$350.00
Pic doesn't show the filters in place because this was during fabrication...but there are 2 side by side, the same size as the "standard" catch can setups out there. It has a drain plug at the bottom.
GSR B18C1 JE Pistons (NEW IN BOX) PN# 176449
Stock Bore (81mm) 10.0:1 RINGS INCLUDED
Asking Price: $450.00 OBO
Last edited by SPOOLINmatt; Jul 23, 2010 at 04:55 PM.
Re: july fs sticky
NX nitrous express 10lbs bottle with gauge and manifold, and custom mounting brackets $100 shipped
blox front camber kit EK 96-00 civic $100 shipped
blox rear control arms EK 96-00 civic $75 shipped SOLD-
blox new control arm bushing kit $35 shipped SOLD-
EK4 ek9 heated power mirrors 96-00 sure they will fit other models. $200 shipped
EK9 civic type r rear hatch wing fresh tafeta white and base gloss black paint $400 shipped
ej1 eg6 92-95 civic pillar with 2 gages autometer pro comp water temp and oil press gauge no sensors. $80 shipped
auto to manual conversion pedals and lines set comes with all pictured $150
innovative race mounts 85a 96-00 civics with B motors used for 1 week 1 race and 7 dyno pulls. $250 shipped SOLD-
greddy boost controller remote swith assembly $80
methanol 4qt tank $100
EK 96-00 spoon style power mirrors painted tafeta white and base painted gloss black $60 shipped
JDM EP3 Oem red badge steering wheel I had this on my 99 civic hatch, so it will fit 96-00 civic , maybe older models in excellent condition working air bag (bonus steering wheel clock spring to match airbag) $399 shipped
EDM center console, cup holder, and JDM shift boot $90 shipped
96-00 civic mirror cap OEM tweeters. $55 shipped
more tocome.
note that I am shipping from a military APO so its the same transaction as stateside (new york)
blox front camber kit EK 96-00 civic $100 shipped
blox rear control arms EK 96-00 civic $75 shipped SOLD-
blox new control arm bushing kit $35 shipped SOLD-
EK4 ek9 heated power mirrors 96-00 sure they will fit other models. $200 shipped
EK9 civic type r rear hatch wing fresh tafeta white and base gloss black paint $400 shipped
ej1 eg6 92-95 civic pillar with 2 gages autometer pro comp water temp and oil press gauge no sensors. $80 shipped
auto to manual conversion pedals and lines set comes with all pictured $150
innovative race mounts 85a 96-00 civics with B motors used for 1 week 1 race and 7 dyno pulls. $250 shipped SOLD-
greddy boost controller remote swith assembly $80
methanol 4qt tank $100
EK 96-00 spoon style power mirrors painted tafeta white and base painted gloss black $60 shipped
JDM EP3 Oem red badge steering wheel I had this on my 99 civic hatch, so it will fit 96-00 civic , maybe older models in excellent condition working air bag (bonus steering wheel clock spring to match airbag) $399 shipped
EDM center console, cup holder, and JDM shift boot $90 shipped
96-00 civic mirror cap OEM tweeters. $55 shipped
more tocome.
note that I am shipping from a military APO so its the same transaction as stateside (new york)
Last edited by rudebwoy; Jul 6, 2010 at 12:30 PM.
Honda-Tech Member
Joined: Feb 2005
Posts: 511
Likes: 0
From: Speed Scene Live, CA
Re: roller
THIS CAR IS SUPER LIGHT!
CRX drag car, 1991 with three K motors, tranny and tons of parts.
(motors are stock, one is complete and running, two are disassembled & complete, but missing one head) Motor and trans and clutch is in the car.
Fiberglass one piece front clip, doors, and rear hatch.
Almost all new and way too many to list. Car has NHRA certified 4130 chro-moly cage.
New paint, New Lexan, 2 brand new clutches including one high doller , Fresh Gear-Speed trans with zero miles on it with spool, New fuel cell, New Hasport mounts, New axles, New traction bar, Koni shocks, more more more.
All welding and fab work done and painted. Fuel cell mounts, battery mount, interior tin work, everything fabbed and painted.
Not running, needs wiring and header and ECU.
http://s976.photobucket.com/albums/ae248/scottlucky/
$4300.00 >>>>>>>>>>>>>>>>>>>>NOW JUST $3300.00 <<<<<<<<<<
Call 714 342-6485
Located in Orange county, not far from Disneyland.
CRX drag car, 1991 with three K motors, tranny and tons of parts.
(motors are stock, one is complete and running, two are disassembled & complete, but missing one head) Motor and trans and clutch is in the car.
Fiberglass one piece front clip, doors, and rear hatch.
Almost all new and way too many to list. Car has NHRA certified 4130 chro-moly cage.
New paint, New Lexan, 2 brand new clutches including one high doller , Fresh Gear-Speed trans with zero miles on it with spool, New fuel cell, New Hasport mounts, New axles, New traction bar, Koni shocks, more more more.
All welding and fab work done and painted. Fuel cell mounts, battery mount, interior tin work, everything fabbed and painted.
Not running, needs wiring and header and ECU.
http://s976.photobucket.com/albums/ae248/scottlucky/
$4300.00 >>>>>>>>>>>>>>>>>>>>NOW JUST $3300.00 <<<<<<<<<<
Call 714 342-6485
Located in Orange county, not far from Disneyland.
Honda-Tech Member
Joined: Aug 2005
Posts: 554
Likes: 0
From: Tokyo, Wi, Us
Re: july fs sticky
**NEW PRICE $175!!! **I have a set of Crower I-Beam Billet Rods for a b16a FS asking $175 obo or trade looking for High HP (700+) things (Fuel pump kits, Topmount mani t4, intercooler, axels,Seats/belst I basically have a motor and turbo) have cash also to put on top of the trade
The rods have been checked out by a local machine shop and everything is in good condition they come with crower hardware also (big bolts)
The rods have been checked out by a local machine shop and everything is in good condition they come with crower hardware also (big bolts)
Last edited by SinglecamMitch; Jul 7, 2010 at 06:46 AM. Reason: price
Re: july fs sticky
Aem uego Digital wideband White face...$175-sold
Autometer Phantom (white face) oil pressure gauge with sending unit...$45--sold
Autometer phantom (white face) boost gauge 0-45 psi...$50 ---sold
Autometer 5 inch Sport Comp with Amber shift light (silver face) 10,000 RPM tach...$150 obo
Autometer 3 gauge A piller pod for 92-95 civic...$45--sold
All gauges were barely used for 2 race events. Then car sat for rebuild. Going a different route and no longer need these gauges. If you would like everything let me know I am willing to work out a package deal.
PayPal accepted buyer needs to add 3% and buyer is responsible for shipping expenses.
Autometer Phantom (white face) oil pressure gauge with sending unit...$45--sold
Autometer phantom (white face) boost gauge 0-45 psi...$50 ---sold
Autometer 5 inch Sport Comp with Amber shift light (silver face) 10,000 RPM tach...$150 obo
Autometer 3 gauge A piller pod for 92-95 civic...$45--sold
All gauges were barely used for 2 race events. Then car sat for rebuild. Going a different route and no longer need these gauges. If you would like everything let me know I am willing to work out a package deal.
PayPal accepted buyer needs to add 3% and buyer is responsible for shipping expenses.
Last edited by cotorresgee; Jul 6, 2010 at 07:53 AM.
Honda-Tech Member
Joined: Jan 2004
Posts: 7,764
Likes: 2
From: city of angels
Re: july fs sticky
complete fuel system from my integra. comes with new hard line about 10 ft. slip nuts and sleeves for the hard lines, -8 hose fittings, y fittings, hose end fittings, hose and lines, aeromotive efi regulator, bulkheads, unions, and reducers. over $200+ in fittings alone. all you need is fuel filter. some parts are not shown but have all of it. comes with 2 venom ( modified bosch pumps, 1000ml per minute, same style pumps used on the venom civic, aka euggum racing hot rod.) pumps are equal to or better then the bosch 044 on the market. everything works great.
400.00 takes everything. to do a similar setup would be in the 800 range.
many can vouch. the pumps work flawless. everything is in great shape and comes with new hard line.
complete gsr intake manifold. come with vac box as well. 150.00 obo
moroso kill switch.
Required for many classes by sanctioning bodies, including NHRA and SCCA. Mounts easily to provide an externally accessible on/off switch in case of emergency. Battery switch is rated to 20 amps. Super Duty is rated to 2,000 amps intermittent and 300 amps continuous.
sells for 60 bux, willing to part ways with it for 25.00
gsr cams 50.00 good condition.
vtec valve covers for b series, 2 with small vtec gsr cover, one with big vtec b16 cover. 75.00 each
gsr brake master cylnder and booster. 97 model. works perfect. 70.00
my og, original gage cluster off my first integra green needle, oem white face. not no indiglo crap. this is super rare, i dont think anyone has this.
200.00
400.00 takes everything. to do a similar setup would be in the 800 range.
many can vouch. the pumps work flawless. everything is in great shape and comes with new hard line.
complete gsr intake manifold. come with vac box as well. 150.00 obo
moroso kill switch.
Required for many classes by sanctioning bodies, including NHRA and SCCA. Mounts easily to provide an externally accessible on/off switch in case of emergency. Battery switch is rated to 20 amps. Super Duty is rated to 2,000 amps intermittent and 300 amps continuous.
sells for 60 bux, willing to part ways with it for 25.00
gsr cams 50.00 good condition.
vtec valve covers for b series, 2 with small vtec gsr cover, one with big vtec b16 cover. 75.00 each
gsr brake master cylnder and booster. 97 model. works perfect. 70.00
my og, original gage cluster off my first integra green needle, oem white face. not no indiglo crap. this is super rare, i dont think anyone has this.
200.00
Last edited by MrParks; Jul 20, 2010 at 01:49 PM.
Honda-Tech Member
Joined: Jul 2001
Posts: 85
Likes: 0
From: toronto, on, canada
Re: july fs sticky
B20 block 13.7 compression pistons, machined and lightened crank, custom 300m rods, custom block guard, when this setup was together with a gsr head and roller rockers made 280hp and 170lbs
$2500obo
-6 lines and fittings with yblock $150obo
b-series tranny case and custom mid plate $500
b-series side-exit built by RMF $900
b-series type r pulley never used $100obo
b-series valve cover red with Vibrant breather fitting $130obo
450cc injectors $150obo
Misc fittings make offer their all brand new
2 union fittings
EF wing wrapped in carbon $200obo
b-series male half-shaft $80obo
edelbrock 75mm adapter plate for honda $60obo
BUYER PAYS SHIPPING
$2500obo
-6 lines and fittings with yblock $150obo
b-series tranny case and custom mid plate $500
b-series side-exit built by RMF $900
b-series type r pulley never used $100obo
b-series valve cover red with Vibrant breather fitting $130obo
450cc injectors $150obo
Misc fittings make offer their all brand new
2 union fittings
EF wing wrapped in carbon $200obo
b-series male half-shaft $80obo
edelbrock 75mm adapter plate for honda $60obo
BUYER PAYS SHIPPING
Re: july fs sticky
Have some H22 stuff need to get rid of.
1 OEM Honda H22 oil pump that I never ran $100
1 Water pump that has about 6K miles on 30 bux
1 bare JDM H22 block (No main caps) 40 bux
NGK wires. Good shape 35bux
1 OEM Honda H22 oil pump that I never ran $100
1 Water pump that has about 6K miles on 30 bux
1 bare JDM H22 block (No main caps) 40 bux
NGK wires. Good shape 35bux
Last edited by extralargenog; Jul 9, 2010 at 11:31 PM.
Honda-Tech Member
Joined: Aug 2001
Posts: 4,319
Likes: 0
From: Umm..., NJ
Re: july fs sticky
Contact Info
E-Mail – BigTeggie@gmail.com
PayPal - BigTeggie@gmail.com ADD 3% FEE to listed price if you choose PayPal
Please Email as my PM’s fill up quickly
Please click on the thumbnails for larger images----UPDATED PRICES 6/7/10
All Motor K24 Short Block
- Assembled by Howard at RLZ
- K24A4 Block and Crank
- AEBS Sleeves
- IPS K24 Cunningham Rods
- RLZ Spec Wiseco Pistons (14.5:1 c/r & 89.5mm bore)
- ACL Race Bearings
- No accessories included
- All parts are brand new, zero miles (the block came out of a wrecked accord with less than 10k)
- I will not part out or disassemble, sorry
$3700 + Shipping
Quaife ATB
-Brand new, Installed into a transmission, however NO MILES
-Includes BRAND NEW bearings and speedo gear
$900 Shipped
Complete EG Bosch Fuel Pump Setup
-Everything is in great condition. Fuel pump and filter are new, less than 50 street miles on all the parts
-Bosch 044 Fuel Pump, Aeromotive 100 Micron Filter, fittings are a mix of Aeromotive, Earls and Summit
-Modified OEM fuel pickup and sock fits perfect in the OEM fuel tank
-Fuel pump mounts to the side of the fuel tank and the filter mounts under the car under the car
-Return line is only from the fuel pickup to the stock feed line, I tied in with a flared fitting, you can use your stock feed line or just run a longer return line and a union
-Feed from the pickup is 8an to the pump, 8an to the filter, and then 6an to the fuel rail, feed is long enough to make it to the fuel rail on a K-Series swapped car
-Includes enough power wiring to run to a relay mounted in the car, Great for an All-Motor Car
$450 Shipped
Hasport EG/DC K Mounts
-Great Condition
-Includes upgraded solid inserts, the extra rubber inserts, and all hardware.
$450 Shipped
Injector Dynamics 725cc Injectors
-Brand new, includes adapters and plugs, great injectors
-Purchase brand new from T1 for $460+shipping
$425 Shipped
K20A Transmission Outer Cases
-Great Condition, One is from K20A2 and the other is a K20A3, both the same thing
$150 Shipped Each
Painless Master Disconnect
-Great Condition, like new
-Includes NHRA Approved shut off switch, and power wiring from the battery (located in front fender) to fuse box in stock location.
-Removes the need to run heavy gauge wiring from the front to back of car
-Everything is labeled and wiring has high quality crimp connections
$150 Shipped
K-Swap Starter and Alternator Wiring
-Great Condition
-Works with K swap where the battery is mounted in the front fender area
-Everything is labeled and wiring has high quality crimp connections
$25 Shipped
E-Mail – BigTeggie@gmail.com
PayPal - BigTeggie@gmail.com ADD 3% FEE to listed price if you choose PayPal
Please Email as my PM’s fill up quickly
Please click on the thumbnails for larger images----UPDATED PRICES 6/7/10
All Motor K24 Short Block
- Assembled by Howard at RLZ
- K24A4 Block and Crank
- AEBS Sleeves
- IPS K24 Cunningham Rods
- RLZ Spec Wiseco Pistons (14.5:1 c/r & 89.5mm bore)
- ACL Race Bearings
- No accessories included
- All parts are brand new, zero miles (the block came out of a wrecked accord with less than 10k)
- I will not part out or disassemble, sorry
$3700 + Shipping
Quaife ATB
-Brand new, Installed into a transmission, however NO MILES
-Includes BRAND NEW bearings and speedo gear
$900 Shipped
Complete EG Bosch Fuel Pump Setup
-Everything is in great condition. Fuel pump and filter are new, less than 50 street miles on all the parts
-Bosch 044 Fuel Pump, Aeromotive 100 Micron Filter, fittings are a mix of Aeromotive, Earls and Summit
-Modified OEM fuel pickup and sock fits perfect in the OEM fuel tank
-Fuel pump mounts to the side of the fuel tank and the filter mounts under the car under the car
-Return line is only from the fuel pickup to the stock feed line, I tied in with a flared fitting, you can use your stock feed line or just run a longer return line and a union
-Feed from the pickup is 8an to the pump, 8an to the filter, and then 6an to the fuel rail, feed is long enough to make it to the fuel rail on a K-Series swapped car
-Includes enough power wiring to run to a relay mounted in the car, Great for an All-Motor Car
$450 Shipped
Hasport EG/DC K Mounts
-Great Condition
-Includes upgraded solid inserts, the extra rubber inserts, and all hardware.
$450 Shipped
Injector Dynamics 725cc Injectors
-Brand new, includes adapters and plugs, great injectors
-Purchase brand new from T1 for $460+shipping
$425 Shipped
K20A Transmission Outer Cases
-Great Condition, One is from K20A2 and the other is a K20A3, both the same thing
$150 Shipped Each
Painless Master Disconnect
-Great Condition, like new
-Includes NHRA Approved shut off switch, and power wiring from the battery (located in front fender) to fuse box in stock location.
-Removes the need to run heavy gauge wiring from the front to back of car
-Everything is labeled and wiring has high quality crimp connections
$150 Shipped
K-Swap Starter and Alternator Wiring
-Great Condition
-Works with K swap where the battery is mounted in the front fender area
-Everything is labeled and wiring has high quality crimp connections
$25 Shipped
