I got a b16 head i wanna build but its kinda cheasy, im missing the:
vtec solinoid
iacv with bolts
all 10mm bolts that hold down the valve cover
2-12mm bolts that hold down the cam plates
1-10mm bolt that holds down the cam cap over the cam seal (short bolt)
1-10mm bolt that holds down the cam cap over the dizzy. (long bolt)
2 wood ruff keys for the cam gears.
I'm not looking to SPEND A WHOLE LOT! so if you have any most or all or all these parts lmk thanks.

 

pm'ed

 

Pm'd as well.

 

pm'ed i have 90% of the parts your looking for.

 

Yes thanks but your asking more than what i paid for the head! haha. No offence but i posted "not looking to spend a whole lot".. i pm'd you crx si-r.

 

i have a gsr fuel rail and injectors. OBD2. shoot me a pm if interested.

 

injectors obd1 $35 shipped
fuel rail $25 shipped
fuel pressure regulator $15 shipped
iat $15 shipped
b16 waterneck $25 shipped
complete obd2 b16 throttle body with tps and map sensor all intact $75 shipped with brand new beck n arnley throttle body gasket


Or take them all for $150 shipped. Lmk I think these are reasonable prices. But all for $75 sorry you won't find them all for this price together.

 

sent you a pm and my price should be cheap enough for the parts i listed, pm me back

 

I understand sir dont get me wrong, its just still too much for me right now, im trying to put a head together on a budget, i got the semi head for $150! so im trying not to spend no more than $400 all together otherwise it would make no sense that i got this head given i can get heads complete for $450-500 allll day so guys help me out, get rid of that junk piling up and help me revive some old car parts. I got a beat up gsr block i might revive and build up eventually. Also we alll know B series parts are no longer in high demand now that K series motors are so well known and above all cheap these days so lmk, Im gonna build a nice fresh motor and sell it here cause i build motors when i can and sell them so any help will be nice. Thanks, Zee.
https://honda-tech.com/forums/showth...2556604&page=6

 

i got the fuel rail... lmk

 

Ive got the stock b series fuel rail with fuel pressure regulator, $20 shipped pm me if interested

 

Thanks for the offers guys!

 

damn, am i a ghost or what

 

I also need the 2 woodruff keys for the cam gears!!

 

I'll try and ship out the fpr, injectors, iat, water neck n throttle body before work tomorrow morning.

I'll pm you with tracking info after they are shipped 95% chance of shipping out in the morning

 

None of those parts are even part of the head....so I don't get why this lowballer is ALWAYS complaining about buying parts so that he can re-sell and make big profits on...good prices btw!

 

First off how are those parts not part of a head?? these parts will complete the head i have so that if i sell it!, its complete so the buyer wont have hunt down a bunch of little things! And i aint no lowballer tough guy! i gots plenty of vouches, its posted clearly i wasn't looking to pay allot! so if your not looking to get every last penny out the junk parts that are laying around the garage then don't bother posting or complaining that im lowballing you for these parts come are you serious!!

vouch thread!
http://www.hondamarketplace.com/show...3#post41520103

 

i have the iacv with bolts, $20 shipped

 

Ive got your keystocks for the cams and dowel pins, cause
you prob gun need those too. Ive got the bling chrome nuts
for the vc, and the acorn nuts hidden under the plastic sprk plug
cvr (Hard to find).
Do you have the vtec dowel pin and seal under #3 c.c?
LOL I do.
Got a cam plug for you too(behind the vtec sol.)
And if you need any camcaps, oil feed rails, LMA's,
valves and springs/retainers...I got it.
PM me if interested.

 

how are these part of the head?
injectors obd1 $35 shipped
fuel rail $25 shipped
fuel pressure regulator $15 shipped
iat $15 shipped
b16 waterneck $25 shipped
complete obd2 b16 throttle body with tps and map sensor all intact $75 shipped with brand new beck n arnley throttle body gasket

nothing outside of the valve train is part of the head.....water neck is part of the block man, c'mon! and the others are part of fuel/air delivery not the head....