Ok i've never done a swap like this before. I have a 93 honda accord with an a20 motor in it right now... someone did a swap previously to put this motor in it. Not sure what they did but it was kind of a hack job. I'm trying to figure out what i need to swap my f22b1 motor into my 93 accord. the harness thats on the a20 plugs right into the body harness that goes right into the computer. I have an ecu out of a 94 honda accord ex with the vtec. The funny thing i'm running into is that my f22b1 harness will not plug into the harness apart of the car at the moment. on the passenger side 2 out of 3 of the plugs look fine but then there is third plug is completely different then whats on my f22b1 motor. on the drivers side plugs dont quite fit the f22b1 harness either. i'm trying to figure out what the heck is going on or what i need in order to get this swap to work. what am i missing here? does anyone know of any kind of jumper harness or good place that explains this swap step by step?

 

http://cb7tuner.com/vbb/showthread.p...ght=f22b1+swap
http://cb7tuner.com/vbb/showthread.p...ght=f22b1+swap
http://cb7tuner.com/vbb/showthread.p...ght=f22b1+swap