does the hose on the firewall or back the block need to be extended?

 

no the stock one will work. but i do recomend replacing old heater hoses. depending how old the car is.

 

you sure? every where i look people say there not long enough....

 

just make sure it has enough slack for when the engine is moving around during acceleration. done

 

so the hard line on the back of the motor coming off the hose is long enough to reach the heater hose on the firewall? cause it doesn't look like it can reach. and dont i need to extend the air intake temperature sensor or what ever its called the plugs sensor on the side of the intake pellum.

 

ttt, cause i dont see how the factory heater hose on my eg firewall can connect to the gsr. and im talking about the heater hose the comes off the water pipe, then into a hard line cause the inlet on the hard line goes to the left like facing the front of the motor and the hose on the fire wall is just straight... please help.

 

then buy 2 hose unions and some hose and make it longer.