95 Acura Integra B20 Vtec Turbo build cancelation project sale
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 287
Likes: 0
From: Federick, MD, usa
Most of these parts were bought here from many ppl over the pass 3years. I started this project and my crx project at the sametime and the dc has to go. The car was damaged on the passenger side from a truck barely backing into it and causing min damage. So my buddy just gave me the car. The car has been converted from a 94 to 01 ls. The only thing that wasn't converted was the rack and pinion and crossmember. The only thing thats needed to get this back on the road is Tag's,front clip,rear bumper and the NECESSARY machine work youre SUPPOSE to do when building a engine. I lost the title but whoever buys this I will do a surety bond on it. Also I will post the VIN so it can be carfox.
Parts List
-01 Integra Suspension front and Rear
-DC strut bar
-Rear camber kit
-DC Sort Oval Cat back (fullexhaust)
-inside converted from tan to all 01 black and grey
-seats with no tears or rips and bare min wear front and rear
-Infamous back hatch cover is there
-Viper Keyless alarm system
-2 Gsr heads that need the normal machine work when you build a motor correctly
-ACT pressure plate and a Brand New Kevlar Kevlar clutchnet clutch
-B20b4 block with PR3 pistons
-Extra Ls Crank micro polished
-Eagle Rods
-Tapped oil Pan
-Old Revhard cast Iron manifold
-4 bolt 3'' downpipe that was made for turbo setup
-And a bunch of other things I'll throw in
1500.00 Takes it all
Bonus-Whoever gets this I will be throwing in a set of 84.5 Endyne rollerwave 10.5:1 slugs and crower B16 rods. This sale will be closing on next sat. Feel free to call or text 832.573.4576.












Parts List
-01 Integra Suspension front and Rear
-DC strut bar
-Rear camber kit
-DC Sort Oval Cat back (fullexhaust)
-inside converted from tan to all 01 black and grey
-seats with no tears or rips and bare min wear front and rear
-Infamous back hatch cover is there
-Viper Keyless alarm system
-2 Gsr heads that need the normal machine work when you build a motor correctly
-ACT pressure plate and a Brand New Kevlar Kevlar clutchnet clutch
-B20b4 block with PR3 pistons
-Extra Ls Crank micro polished
-Eagle Rods
-Tapped oil Pan
-Old Revhard cast Iron manifold
-4 bolt 3'' downpipe that was made for turbo setup
-And a bunch of other things I'll throw in
1500.00 Takes it all
Bonus-Whoever gets this I will be throwing in a set of 84.5 Endyne rollerwave 10.5:1 slugs and crower B16 rods. This sale will be closing on next sat. Feel free to call or text 832.573.4576.












Thread
Thread Starter
Forum
Replies
Last Post
HondaMeNow
For Sale
19
Feb 16, 2013 03:19 PM
BrianRacerboy
Vehicles for sale
5
Apr 7, 2009 04:19 PM




