FL RHD:K20:MIDORI:DC2:BBS - FS/FT
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 1,111
Likes: 0
From: Margate, FL, United States
CAR IS GONE
CAR IS GONE
CAR IS GONE
CAR IS GONE
CAR IS GONE
Now just because you may have one of these cars does not mean I will jump at them. They need to be clean and in VERY good condition. I dont want someones headache or junk. I do have money to add if the car is just amazing but for the most part I would like them pretty much stock.
As far as a selling price I have receipts for 28K I have invested into the car. I know I will never get that but I would like to have 15K for it the way it sits. I am willing to lower the price but parts will come off.
If you have any questions please PM me and I will get back to you.
Here are the specs (I am sure I am missing things):
Midori Integra
exterior:
-JDM HID front end (all O.E. - all metal)
- hood
- fenders
- side markers
- rad support
- HID lights
- OE JDM Lip
-complete color change to Honda Midori Green (car was painted with Dupont Premium)
-engine bay was done in battleship grey
-J's racing front air duct
interior:
-RHD conversion - this was done professionally and the sticth weld from factory was redone to insure its 100%
-jdm ITR cluster
-jdm vents
-jdm auto air
-jdm door switches
-NRG quick release
-NRG quick release lock
-Nardi black face wood grain steering wheel
-C's c pillar bar
-jdm ITR floor mats
-vintage 78 Recaro orange gradient seats
-jdm ITR arm rest delete
-F1 Spec brushed shift ****
-RCrew short shifter
-jdm ITR center console
-pioneer head unit - AVH-P3200DVD /CD/MP3/WMA/TOUCH SCREEN
powertrain:
-built K20 motor with 7k on the motor.
-cp pistons 12.5:1
-Prayoonto/BC stage 2 cams
-eibach valve springs
-portflow retainers
-RBC manifold
-Prayoonto CNC ported head
-Rcrew throttle body adpater
-Maxbore 70MM throttle body
-RCrew fuel rail
-Injector Dynamics 750 injectors
-Wrinkle finish USDM valve cover w/ -12 earls black finish lines for vent
-AEM intake
-RCrew headers
-RCrew 3 inch exhaust
-08 SI tranny 4.7 final drive
-clutch masters stage 2 clutch
-clutch masters aluminum flywheel
-holley 255gpm fuel pump
-holley fuel pressure regulator
-all holley fuel lines in -6 black with black fittings
-earls fuel filter (less than 2k on it)
-Hondata KPro ECU
-New alternator, AC compressor, starter, and belts
-ARP head bolts
-Cometic head gasket
-CORR shifter cable bushings
-Mishimoto radiator
-Mishimoto rad fans
brakes and suspension:
-ITR 5 lug
-new brembo disks and honda factory pads
-16 inch bbs RS or 16 inch GABS
-Function and Form Type II suspension
-aluminum lower control arms
-ITR front sway bar
-ITR rear sway bar
-Earls SS brake lines
-Enjoki lug nuts
-RAYS locking nuts
Now for the pics:





Thanks for looking,
Phil
CAR IS GONE
CAR IS GONE
CAR IS GONE
CAR IS GONE
Now just because you may have one of these cars does not mean I will jump at them. They need to be clean and in VERY good condition. I dont want someones headache or junk. I do have money to add if the car is just amazing but for the most part I would like them pretty much stock.
As far as a selling price I have receipts for 28K I have invested into the car. I know I will never get that but I would like to have 15K for it the way it sits. I am willing to lower the price but parts will come off.
If you have any questions please PM me and I will get back to you.
Here are the specs (I am sure I am missing things):
Midori Integra
exterior:
-JDM HID front end (all O.E. - all metal)
- hood
- fenders
- side markers
- rad support
- HID lights
- OE JDM Lip
-complete color change to Honda Midori Green (car was painted with Dupont Premium)
-engine bay was done in battleship grey
-J's racing front air duct
interior:
-RHD conversion - this was done professionally and the sticth weld from factory was redone to insure its 100%
-jdm ITR cluster
-jdm vents
-jdm auto air
-jdm door switches
-NRG quick release
-NRG quick release lock
-Nardi black face wood grain steering wheel
-C's c pillar bar
-jdm ITR floor mats
-vintage 78 Recaro orange gradient seats
-jdm ITR arm rest delete
-F1 Spec brushed shift ****
-RCrew short shifter
-jdm ITR center console
-pioneer head unit - AVH-P3200DVD /CD/MP3/WMA/TOUCH SCREEN
powertrain:
-built K20 motor with 7k on the motor.
-cp pistons 12.5:1
-Prayoonto/BC stage 2 cams
-eibach valve springs
-portflow retainers
-RBC manifold
-Prayoonto CNC ported head
-Rcrew throttle body adpater
-Maxbore 70MM throttle body
-RCrew fuel rail
-Injector Dynamics 750 injectors
-Wrinkle finish USDM valve cover w/ -12 earls black finish lines for vent
-AEM intake
-RCrew headers
-RCrew 3 inch exhaust
-08 SI tranny 4.7 final drive
-clutch masters stage 2 clutch
-clutch masters aluminum flywheel
-holley 255gpm fuel pump
-holley fuel pressure regulator
-all holley fuel lines in -6 black with black fittings
-earls fuel filter (less than 2k on it)
-Hondata KPro ECU
-New alternator, AC compressor, starter, and belts
-ARP head bolts
-Cometic head gasket
-CORR shifter cable bushings
-Mishimoto radiator
-Mishimoto rad fans
brakes and suspension:
-ITR 5 lug
-new brembo disks and honda factory pads
-16 inch bbs RS or 16 inch GABS
-Function and Form Type II suspension
-aluminum lower control arms
-ITR front sway bar
-ITR rear sway bar
-Earls SS brake lines
-Enjoki lug nuts
-RAYS locking nuts
Now for the pics:





Thanks for looking,
Phil
Last edited by third lobe; Aug 30, 2010 at 04:31 AM. Reason: CAR IS GONE
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 1,111
Likes: 0
From: Margate, FL, United States
Thanks for the love!
sorry about that. Here is one from when I was re-doing the bay.
I will try and get new shots of the bay when I have some time.

Thanks,
Phil
sorry about that. Here is one from when I was re-doing the bay.
I will try and get new shots of the bay when I have some time.

Thanks,
Phil
so sick! this may be a long shot but its a 4 door http://hondamarketplace.com/showthread.php?t=2788488





