I swapped it into a 92 prelude s. That part went perfect, no cels no idling problems, but now i have a new problem. The control arm hits inside the fender if i don't crawl over speed bumps. The car had been sitting for 2 years and the previous owner put on some cheap lowering springs over the stock shocks. Its only lowered 1 1/2 and i dont wanna go any lower then that. Anybody have any suggestions on how i can fix this problem cheaply?

 

Grind down the inner fender where its hitting. Borrow disk sander and ur set. FREE!

 

does it have camber kits?

 

Or just save up and get some Tein S Tech. Lowers 1.5" up front and 1.2" at the rear.

 

yeah it has the ball joint camber kit. I figured it out though, the springs were just worn out and had way too much play