MD TW/FS 02' s2k 570whp Pump Gas
$17,000, willing to negotiate and will only trade if the trade invovles enough cash to pay the car off and a serious car/bike to trade..
yes the price was raised, hence the T/W point of this thread..
Car has 86k miles, clean title. Has been boosted maybe 10k miles..Clean interior, no tears, but some wear marks on the driver seat, passenger seat is like new.
The car has no heat, and no ac at this time.. only thing i removed were the ac lines and compressor, nothing is butchered to where you cant put it all back in, i still have the stock ac lines and compressor. Also the heat just needs the stock coolant lines. i looped the stock hose to get rid of the heater lines. i had planned to run custom ac lines, which whoever buys this car should invest in. very clean setup. All work has been done by me, wire tuck, turbo setup etc..
The fuel setup listed is actually sitting on my living room table, it is NOT on the car, but i am throwing it in with the car when it goes.
I am getting rid of the car beause i am ready to move on, need something more practical. And maybe throw a deck on the house..
the car is garage kept about 300 days out of the yeah, the paint is in mint condition other than a few rock chips on the fender and cracks on the rear bumper, interior is in almost perfect condition, i am the second or third owner of this car, i bought it used with around 20k on the clock..
i am slowing falling out of modifying cars, i have other things on my list now like a house to mod. willing to negotiate..pm of email me at nellyei12074@msn.com
phone 240 446 9389
02' S2k Indy Yellow
Appearance
- Vis Carbon Hood
- OEM Front Lip
- Seibon Carbon Trunk
Suspension
- Tein Type Flex coilovers
ICE
Alpine 9886 Head Unit w/ i pod cable
Alpine Type s door speakers
ENGINE
- Stock F20C Bottom End
- F20C Head Milled/Sonic Cleaned New Seals by Justice Racing
- ARP Head Studs
- AP2 Valve Spring Retainers
- Cometic .076" Head Gasket
- Tucked Engine Bay & Custom Brake Lines
- Mishimoto 140* Thermostat
SETUP
- Precision 600 FMIC
- Precision PT6265 .81a/r Billet
- PFabrications ELTM w/ ARP Manifold Studs
- PFabrications 3" Downpipe w/ Integrated WBo2 Bung
- PFabrications Intercooler Piping
- Tial Q 50mm BOV
- Tial 44mm W/G
- Pneumatic push-lok fittings w/ 1/4" air brake line
- Fast-Turbo Vacuum Block
- 4an Stainless Braided lines for Wastegate Boost Reference
- 10an Oil Drain into block girdle
FUEL
- Bosch 1000cc Saturated Injectors
- Walbro 255lph
NOT ON THE CAR, but have in hand
- Feeding Bosch 044
- Fuel Pump Relay wired to battery
- Aeromotive Compact FPR
- Inline Pro Fuel Rail
- -6an Feed line
DRIVETRAIN
- ACT 6-Puck Sprung
- PuddyMod Stage 3 Rear Diff, Cryo Gears, Bearing Caps etc
OIL DELIVERY
- Fast-Turbo Oil Lines
ENGINE MANAGEMENT
- AEM EMS 1052
- AEM Wideband Gauge
- MAC Series 35 Boost Solenoid
- AutoMeter CF Boost Gauge
- AEM 3.5 Bar MAP
New Precision pt6265 setup


New Setup: 546/336 @ 20psi Vs. Old log setup on 20lbs

Old Setup on 19lbs log mani and 1.15 a/r exhaust side

Here are some more pictures:
PuddyMod Stage 3 Rear Diff Install

random outside pic

inside pic

act clutch install

outside



yes the price was raised, hence the T/W point of this thread..
Car has 86k miles, clean title. Has been boosted maybe 10k miles..Clean interior, no tears, but some wear marks on the driver seat, passenger seat is like new.
The car has no heat, and no ac at this time.. only thing i removed were the ac lines and compressor, nothing is butchered to where you cant put it all back in, i still have the stock ac lines and compressor. Also the heat just needs the stock coolant lines. i looped the stock hose to get rid of the heater lines. i had planned to run custom ac lines, which whoever buys this car should invest in. very clean setup. All work has been done by me, wire tuck, turbo setup etc..
The fuel setup listed is actually sitting on my living room table, it is NOT on the car, but i am throwing it in with the car when it goes.
I am getting rid of the car beause i am ready to move on, need something more practical. And maybe throw a deck on the house..
the car is garage kept about 300 days out of the yeah, the paint is in mint condition other than a few rock chips on the fender and cracks on the rear bumper, interior is in almost perfect condition, i am the second or third owner of this car, i bought it used with around 20k on the clock..
i am slowing falling out of modifying cars, i have other things on my list now like a house to mod. willing to negotiate..pm of email me at nellyei12074@msn.com
phone 240 446 9389
02' S2k Indy Yellow
Appearance
- Vis Carbon Hood
- OEM Front Lip
- Seibon Carbon Trunk
Suspension
- Tein Type Flex coilovers
ICE
Alpine 9886 Head Unit w/ i pod cable
Alpine Type s door speakers
ENGINE
- Stock F20C Bottom End
- F20C Head Milled/Sonic Cleaned New Seals by Justice Racing
- ARP Head Studs
- AP2 Valve Spring Retainers
- Cometic .076" Head Gasket
- Tucked Engine Bay & Custom Brake Lines
- Mishimoto 140* Thermostat
SETUP
- Precision 600 FMIC
- Precision PT6265 .81a/r Billet
- PFabrications ELTM w/ ARP Manifold Studs
- PFabrications 3" Downpipe w/ Integrated WBo2 Bung
- PFabrications Intercooler Piping
- Tial Q 50mm BOV
- Tial 44mm W/G
- Pneumatic push-lok fittings w/ 1/4" air brake line
- Fast-Turbo Vacuum Block
- 4an Stainless Braided lines for Wastegate Boost Reference
- 10an Oil Drain into block girdle
FUEL
- Bosch 1000cc Saturated Injectors
- Walbro 255lph
NOT ON THE CAR, but have in hand
- Feeding Bosch 044
- Fuel Pump Relay wired to battery
- Aeromotive Compact FPR
- Inline Pro Fuel Rail
- -6an Feed line
DRIVETRAIN
- ACT 6-Puck Sprung
- PuddyMod Stage 3 Rear Diff, Cryo Gears, Bearing Caps etc
OIL DELIVERY
- Fast-Turbo Oil Lines
ENGINE MANAGEMENT
- AEM EMS 1052
- AEM Wideband Gauge
- MAC Series 35 Boost Solenoid
- AutoMeter CF Boost Gauge
- AEM 3.5 Bar MAP
New Precision pt6265 setup


New Setup: 546/336 @ 20psi Vs. Old log setup on 20lbs

Old Setup on 19lbs log mani and 1.15 a/r exhaust side

Here are some more pictures:
PuddyMod Stage 3 Rear Diff Install

random outside pic

inside pic

act clutch install

outside



Last edited by tech7427; Jul 22, 2010 at 03:36 PM. Reason: added more text
Trending Topics
bump for all the other pics?
gawd this is an awesome deal...if i had better credit i'd get a loan and go pick it up
BTW you didnt post mileage...or maybe i missed it?
gawd this is an awesome deal...if i had better credit i'd get a loan and go pick it up
BTW you didnt post mileage...or maybe i missed it?


