i recently got some gsr leathers in trade for a bunch of crap in my yard. the seats were in an 89 si crx which is different from my 90 which i have read are different. but im stupid and i have read write ups on seat pan swaps but none i could find had pictures. could someone assist me in doing the pan swap 2 gsr leathers? i like pix

 

hahahahahaha..same problem here..i have 90-91 crx si seats..just bought an ef sedan seat n tried to change the pan...pan is wider and the foam of the si seat wont go on right...its harder than it looks...

 

Here is one for an EF not sure if it will help or not. Has pictures

http://www.clubcivic.com/board/showthread.php?t=132339

 

WTF ever, do what I did anddrill some new holes as needed. I got 93 civic seats in my 88. Updates the look for about half the price of Si or Integra seats. Give it a shot I think I used 2 out of the 4 orgional bolts.
I suppose you cut off the brackets you need then tack weld them back on. I did that on my 93 S-10, I put old school 71 Datsun seats in. It worked out all right, track on drivers side got a little ****ed, and a few burnholes from the sparks jumpin. I dont know good luck!!!!

 

either do it right, or don't bother doing it at all.

swap the pans and be done.

 

it isnt too tough but be prepared to have some time to do it.

 

THANK YOU!!!!!!!!!!!!!!!!!!!!!!

 

or you could cut the sliders off and put the current (in car) sliders on.