92 civic ls/vtec- built but needs HG or rebuild- $2700 quick sell VT
Thread Starter
Honda-Tech Member
Joined: Mar 2004
Posts: 204
Likes: 0
From: Outside Burlington, VT, USA
92 civic ls/vtec- built but needs HG or rebuild- $1800 quick sell VT
1992 Honda Civic CX- $1800
Need it gone ASAP- Had an emergency come up.
*Lost compression, either needs headgasket or rings. White smoke at idle so guessing HG, but haven't done a leakdown test. Need to sell asap bc I'm moving so its priced as if it needs a rebuild.*
-Small leak in gas tank when full- fine when running 3/4 tanks
-started throwing 02 engine code
Ls/vtec motor
B18b block (60,000) before boring and honing to 81.5
Block shaved .010
Wiesco 5cc dome pistons
Crower Rods
New rod bearings
JDM DC 4-1 header 2.5" collector
2.5" exhaust pipe to magnaflow resanator to HKS supperdragger which is spent I think.
B16 Head
Shaved .050
Cometic custom headgasket
Super tech springs and retainers
Supertech SS FF intake and exhaust valves
Crower 63413 CAMS
Skunk 2 cam gears (6 bolt)
Stage 3 or 4 cant remember Port and Polish w/ chamber work by King Motorsports
Was 13-1 compression with .04 HG but replaced with .51 so slightly lower
Custom Fab'd Intake Manifold made by King Motorsports
65 mm Throttle Body
Lightened and balance crank pulley No AC PS
Endyn Oil Catch Can
Short Ram intake
Half Size Fluidyne aluminum rad
Full size stock radiator- if u want it
99-00 si tranny
LSD- Type R
Tokico 5-ways in the front
JDM type r 23mm sway bar in rear
Stock civic ex sway bar in front
H&R sport springs
Rear generic strut bar
Brand New Hawk HP + pads (NIB) included not installed
92-93? Prelude front seats(black) w/ lumbar support
Pioneer CD player
P28 ECU
Hondata s100 w/ boost option
Street tuned and dyno tuned by Tim @ King Motorsports 2 years ago
Tuned with SMSP copy header and the engine made 225 whp. Has DC header currently on it.
Selling so cheap because I have had 2 buyers flake at the last moment so I need to get rid of this before I move. Car is located in Fairfax, VT 20 miles outside of Burlington.
Best way to get a hold of me is email: nigelbiathlete@yahooDOTcom
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Need it gone ASAP- Had an emergency come up.
*Lost compression, either needs headgasket or rings. White smoke at idle so guessing HG, but haven't done a leakdown test. Need to sell asap bc I'm moving so its priced as if it needs a rebuild.*
-Small leak in gas tank when full- fine when running 3/4 tanks
-started throwing 02 engine code
Ls/vtec motor
B18b block (60,000) before boring and honing to 81.5
Block shaved .010
Wiesco 5cc dome pistons
Crower Rods
New rod bearings
JDM DC 4-1 header 2.5" collector
2.5" exhaust pipe to magnaflow resanator to HKS supperdragger which is spent I think.
B16 Head
Shaved .050
Cometic custom headgasket
Super tech springs and retainers
Supertech SS FF intake and exhaust valves
Crower 63413 CAMS
Skunk 2 cam gears (6 bolt)
Stage 3 or 4 cant remember Port and Polish w/ chamber work by King Motorsports
Was 13-1 compression with .04 HG but replaced with .51 so slightly lower
Custom Fab'd Intake Manifold made by King Motorsports
65 mm Throttle Body
Lightened and balance crank pulley No AC PS
Endyn Oil Catch Can
Short Ram intake
Half Size Fluidyne aluminum rad
Full size stock radiator- if u want it
99-00 si tranny
LSD- Type R
Tokico 5-ways in the front
JDM type r 23mm sway bar in rear
Stock civic ex sway bar in front
H&R sport springs
Rear generic strut bar
Brand New Hawk HP + pads (NIB) included not installed
92-93? Prelude front seats(black) w/ lumbar support
Pioneer CD player
P28 ECU
Hondata s100 w/ boost option
Street tuned and dyno tuned by Tim @ King Motorsports 2 years ago
Tuned with SMSP copy header and the engine made 225 whp. Has DC header currently on it.
Selling so cheap because I have had 2 buyers flake at the last moment so I need to get rid of this before I move. Car is located in Fairfax, VT 20 miles outside of Burlington.
Best way to get a hold of me is email: nigelbiathlete@yahooDOTcom
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Last edited by Nigel379; Oct 3, 2010 at 06:01 PM. Reason: change in price
Thread Starter
Honda-Tech Member
Joined: Mar 2004
Posts: 204
Likes: 0
From: Outside Burlington, VT, USA
Re: 92 civic ls/vtec- built but needs HG or rebuild- $2700 quick sell VT
Need this gone by the weekend. email me nigelbiathlete@yahoo.com
Thread Starter
Honda-Tech Member
Joined: Mar 2004
Posts: 204
Likes: 0
From: Outside Burlington, VT, USA
Re: 92 civic ls/vtec- built but needs HG or rebuild- $2700 quick sell VT
Buyer fell through. $2300 if you can pick this car up in the next 5 days. Need it gone from my friends house by the weekend. Email me if interested.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Nigel379
Vehicles for sale
10
Oct 6, 2010 06:38 PM
Built LS motor-high compression N/A with P&P head, GSR exhaust, DC header, Skunk2 intake manifold, S
240M3SRT
For Sale
4
Jan 4, 2006 10:17 PM
