hey guys, i need your help. i was just wondering if anyone has ever tried mating the zc transmission with the d16y8 or d16z6 motor. i'm not sure if this is even possible, but i assume it would since the zc is a "D" series motor. if it is possible, which axles do i use for the swap? thanks in advance for any help or information.

 

<--Thinks the a6/b2 are the most commonly ones, but is also interested to see if a z6/y8 will work.

jB

 

yes all the d trans will work,if its going in a 4th gen then you need the 88-89 acura integra axles.

 

thanks a lot.