Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 1-1-2010, any edit to these threads, will result in sanctions. if it persists, the stickies will disappear for good.

 

Parting out OUTLAW car.............
http://www.hondamarketplace.com/show....php?t=2768993

 

Bought my setup straight from Full-Race since im a local and pretty good buddies with Aaron, Henry, and Jake from there. Wasn't sure if i'd still drive the car on the street or SWFD it, so i purchased the T4/T67 ball bearing js in case and had the exhaust housing 1600deg black coated. Joe from locash said we should hit 700hp at 30-32psi no problem. Well, long story short ive decided im gunna go all out and have a buddy that is selling his brand new s372r so im wanting to get it. That is the ONLY reason im selling this turbo, otherwise im going to keep it. Brand new, never even been mounted or anything. Here's the specs straight from my Full-Race invoice (yes i still have my receipts) :

T4/T67 Ball Bearing
-Compressor:
67mm ind, .70 AR T04S hsg

-Turbine:
P trim wheel .84 AR twin scroll hsg w/ 3in v-band discharge

HPC turbo housing coating 1600deg black


i paid $1,350 for the turbo and an extra $165 to have the exhaust housing coated. Never mounted or anything, and it's still sitting next to my bed along with my manifold. Lookin to get $1,200 since i'll be loosing $$ either way. Please txt me for pix of the turbo, full-race invoice, etc... im not a scammer or anything like that; have a few vouches. Paypal only, unless yur local u can pay cash, etc...

623.565.7319 *Austin*

 

H22 Skunk2 Pro1 Cams used for about 10 passes and one dyno session. 575.00 + shipping

H22 Quaife LSD about a year old works perfect 650.00 + shipping

H series DSS 5.9 Axles comes ARP studs welded to the hubs 1000.00 + shipping

 

F/S...................Accel DFI gen 7 with BIG CAP DIZZY........MINT!!alittle old school but gets the job done ..........$600 obo

Diamond Racing 15x8's 4x100 rims....BRAND NEW IN BOX.............they speak for themselves

$300 shipped





Full-Race backdoor fmic....used for dyno pulls then decided to go bigger.................$500

20*11*3 in. core supports up to 720whp
Bar and plate core design
Hand fabricated and TIG welded endtanks
back door design virtually eliminates the possibility of "blowing off" the hot side charge pipe.
BOV flange placement on the hot side endtank available.
Aluminum tabs on the core are available for ease of installation.

 

THIS CAR IS SUPER LIGHT!
CRX drag car, 1991 with three K motors, tranny and tons of parts.
(motors are stock, one is complete and running, two are disassembled complete missing one head) Motor and trans and clutch is in the car.
Fiberglass one piece front clip, doors, and rear hatch.
Almost all new and way too many to list. Car has NHRA certified chro-moly cage.
New paint, Lexan, New Lexan, 2 brand new clutches including one high doller , trans with spool, fuel cell, Hasport mounts, axles, more more more.
All welding and fab work done and painted. Feul cell mounts, battery mount, interior tin work, everything fabbed and painted.
Not running, needs wiring and header and ECU.

http://s976.photobucket.com/albums/ae248/scottlucky/

$4300.00 *****NOW only $3500.00*********
Call 714 342-6485
Located in Orange county, not far from Disneyland.

 

ferrea h22 roller rocker setup with stage 3 cams (if they have 10 miles on them thats alot) mint will part cams or trade for h22 turbo cams also...

2004 18' closed deck trailer all options electric brakes etc..1700 looks new

full msd setup like new b.o
24.5x8.5x15 m&h slicks lots of meat left b.o
2 mickey thompson drag radials less then 75 miles on them 205/50/15 b.o
2 -15x7 5x114.3 sub zeros black super light make offer
misc h22 drag stuff pm for pics
38mm tial waste gate polished like new make offer

 

Used NGK wires b16 $15


Used MSD wires for use with MSD billet distributor or cap, coil wire included. $30


Brand new Benen industries tow hook $55


Used Greddy remote switch for use with profec boost controllers like new all hardware included $99


aluminum water methanol reservoir nice design and quality $75


used Devils own water methanol contaner $25


used MSD SCI ignition SOLD


used blitz filter $20


Autometer dual gauge pod with oil pressure and water temperature gauges $85
will separate each gauge $30 and pod $25

Autometer EGT gauge dented on bezel (gauge only) SOLD


ebay fog light kit for EK missing the left side shield $55


used AVID EK B series mount kit 75A $220

NGK race spark plugs Heat Range 9 I have 7 sets of these SOLD


SRR rear sway bar and subframe brace, will include a set of megan racing control arms forgot the pics of the control arms $135


Auto to manual conversion parts include pedal set, fire wall lines cylinder, minus the clutch cylinder $110


DC sports upper header for 2003 civic ex $80


Used threadstone intercooler TR10 dented at the bottom painted on the front faded need repaint or strip leap free. $99



will accept paypal: lindsay_leroy@yahoo.com or postal money order. no check PM me for questions if any
dont let my location prevent you from buying, I ship from a APO location with may only delay delivery buy 1-2 days if any delay occurs. I am not shipping from international.

 

I WILL UPDATE THIS THREAD WITH MORE ITEMS DAILY

I ran into a money situation. I need to sell some things to try and make some cash back.

EVERYTHING IS BRAND NEW, NEVER USED

B16a2 head fresh from the machine shop - $650
new valveguides and seals
omni dual valvesprings
3 angle valvejob
lightly resurfaced
gsr cams included

NOT INCLUDED..valvecover, dist, intake manifold









Custom Web Cam 260 duration @ .050 with .485 lift Turbo Profile - $600



Chase Bays Custom MIL-SPEC harness...it consist of dual mil-spec connectors (one for the main engine harness and the other for my m&w pro-10/crane cams coil ignition set up), T1 cam trigger, duesch (sp?) connector for the dist, Injector dynamic injector clips (special type of plug to run the ID Bosch 1000cc inj), also, the boost solenoid is integrated into the harness.

This Package will come with harness itself ($1,400), M&W pro10($475), Crane Cam PS92($99), T1 cam trigger with both GE cam gears($600), Boost solenoid and T1 bracket($100), dist w/ msd cap ($100), and groud wires. AEM EMS IS NOT INCLUDED. everything roughly comes to $2,800

asking $2,350.00













B16A hydro transmission..freshly rebuilt (new bearings, synchros 3/4 gear) Quaife LSD - $1,700





-10an hose ends and 10ft of hose - $200





valve cover with 2 -10an bung and the cam gear cover completely cut off - $120



powder coated domant purple vc with 2 -10an bungs..one is stripped - $120





1993 civic hatch
Fully painted inside/outside sebring silver off s2000
All new moldings/ caps/bolts/ etc
Apexi n1 99 spec susp
Subframe, lca, rear engine T bracket powder coated extreme chrome
Walbro intank wired with direct 12v
-8an line ran from the tank to the engine bay
Gsr brakes front/rear with braided lines
All brakes lines have been tucked to the cabin side of the firewall
Benen tie bar and function7 lca’s
Spoon replica mirrors
Dss stage 2.9 axles with hub..extended arp studs all around (b-series)
GSR fat fives with decent tires included

NO seats

here is the build thread for the car https://honda-tech.com/forums/appearance-build-threads-122/vietjdmbois-eg-hatch-build-thread-2212864/

ASKING PRICE - PRICE DROPPED $4,500.00



















SOLD ITEMS

BMC Race T4 Ramhorn, Polydyn Ceramic Coated, 44mm wg flange, fully polished 4'' aluminum dp, full stainless dumptube - SOLD

BW S366 ett T4 flange, Polydyn coated exhaust housing, powder coated comp housing, chromed brackets - SOLD

Fluidyne Radiator..comes with alum shroud and fan. all pieces FULLY POLISHED, comes with -16AN bungs welded on -SOLD!

Hargett 3'' Clamps - SOLD!

GE fuel rail..b-series..black - SOLD!

Full-Race Pro-am Traction bar for eg/dc.. actual bar has been chromed. will include all hardware and bars. - SOLD

Innovative Solid Mounts for eg/dc..fully polished - SOLD

Nardi steering wheel, splash hub (eg/dc), nrg quick release - SOLD

Omni B-series 4 bar map sensor. Brand new -SOLD

Push-lock fittings and 6ft of hose - SOLD

Jegs Coolant overflow tank..fully polished - SOLD

Garrett 24x12x3.5" IC core - SOLD

Chase Bays Booster Delete w/ Wilwood MC..all polished - SOLD

ONE FAB SR20DET turbo manifold..needs to be finished welding..two 1 inch long areas on opposite sides of mani - SOLD

60mm Defi boost gauge.
Reads PSI and lights up amber. Comes with control until and a mounting pod- SOLD

 

I have for sale some 24.5/8/13 MT slicks, they only have about 15 passes on them. I bought these from joe at locash and only used them about 5 times and he said he had about 9 or 10 passes on them so 15 total. Still plenty of life left and are in good condition. LOWERED THE PRICE NEED THEM GONE $260 shipped, PM for more info.




SLICK #1



SLICK #2

 

For Sale:
All prices are OBO and do not include shipping or PayPal fee. Please pm or call me with any questions.
Matt: 301-643-7975
Full-Race B-series ProSteet T3/Dual 44mm Ramhorn manifold ($600)


ANOTHER PIC
http://i169.photobucket.com/albums/u...IMGA0344-1.jpg
4” Downpipe with V-band on both sides ($200)


2- Dumptubes for Tial 44’s ($60 each)

Lightweight 12V battery [label came off but pretty sure its odyssey] ($80)

Intercooler ($600)
Garrett core (24x12x3.5) : Overall width 34.5” : 2.5” In/Outlet

 

i got a few things up for sale out of my turbo set up

i have a 4202R turbo 74mm 128exhaust housing with 20 to 30 track passes and 15 dyno pulls.$1,800 OBO

4" down pipe with flex pipe weld on it and v-clamps .$140.00<<<<<-----SOLD

Ebay intercooler 4x32x12 with 3" aluminun charge pipe and everything has v-clamps welded on them this is for a 1992 civic. $300.00

Z10 traction bar red $150.00 this fits 1992-1995 civic

version 1 AEM serial # 1040-0379 $800.00

4" magnaflow muffler $60.00

stock B-series axles $70.00

a set of GRP rods ls/B20 used for 4 dyno passes $400.00 OBO

all parts located in NJ

 

I have a few items for sale:

Skunk2 composite b-series fuel rail. Brand new in the box, part #305-05-5000. $160.00 shipped in the 48 states.



Brand new PRB Type-S 05-06' ecu, 6 spd. Part # 37820-PRB-306. $375.00 shipped in the 48 states.



Billet aluminum brake master cylinder brace. Prevents deflection from firewall when heavy braking. Fits civic/integras. $50.00 shipped in the 48 states.



Brian Crower stage 3 N/A cams part #BC0013. These are great for big turbo/high power set-ups. Was going to use these in my personal engine, but they will not work with oversized valves. The cams are brand new, but were used for mock-up in the cylinder head to check for valve to valve clearance. These are very similar to the NRG SFWD cams. $350.00 shipped in the 48 states.





Brand new PWR aluminum half core radiator. $350.00 shipped in the 48 states.



Samco Sport 99-00 Civic Si radiator hoses in black. Used, but in like new condition. $60.00 shipped in the 48 states.



*All prices are firm, and not looking for trades of any kind. Shipping is only to the lower 48 states in the price.

 

$350 shipped




They're -14cc dish, which puts the compression right at 8.5:1with stock crank/rods. Brand new, never used. Box is just a little old. Comes with std wrist pins. Comes with all rings and wrist pin locks.

 

-AEM 30-2710 Injector driver used for 1 dyno session only $190.00

-Type R LSD with bearings and speedo gear $350.00 (can include new final drive gear set 4.40 used for 5 miles maybe for $150.00)

-Wiseco IB spec lightweight 12.5:1 85mm domed pistons, B-series used for 5K miles...still in great condition $150.00

-1600cc Injectors flow matched and cleaned $240.00

-AEM 30-6040 ECU brand new $900.00

All items are located in Bristol/Tri-cities TN area and can be picked up or will ship from there. All prices are WITHOUT shipping and priced accordinly!
__________________

 

92 CIVIC COUPE, LS VTEC, JG PRO SERIES HEAD, JG EDLEBROCK INTAKE W/RPM THROTTLE BODY, 1600 INJECTORS, DFI ENGIE MANAGEMENT W/MSD DIGITAL 6 W/2 STEP, GARRET TURBO, FULL CHROMALLY CERT CAGE TO 8:50, REAR SUSP CHANGED TO (RON LUMAS) STRANGE STRUTS W/SPINDLE MOUNT BOGARTS, 15 IN WELDS ON FRONT, DRIVE SHAFT SHOP AXLES, PRO DRIVE SPOOL, FULL INTERIOR SHEET METAL, FIBERGLASS DOORS, FRT END, DASH AND TRUNK LID, CUSTOM PAINT AND AIR BRUSH, F.A.L LEXAN WINDOWS, WHEELIE BAR AND CHUTE. LOTS TO LIST. CAR RUNS CONSISTANT 10:40 AND IS TURN KEY, POSS TRADES, SERIOUS INQUIRES PLEASE. 10k OBO

 

F.S.
Gsr Quaife lsd. 10,000 + - miles, Great shap. $650
hondata s200/boost set up in a p28. $200
no name brand 4-2-1 D seires header. $40

 

80 shipped

 

Hondata 4 Bar used on the dyno to tune the car, Four 1/8th mile passes, and driven down the street a few times. Barely used.



$90 shipped

 

Contact Info
E-Mail – BigTeggie@gmail.com
PayPal - BigTeggie@gmail.com ADD 3% FEE to listed price if you choose PayPal

Please Email as my PM’s fill up quickly

Please click on the thumbnails for larger images

All Motor K24 Short Block
- Assembled by Howard at RLZ
- K24A4 Block and Crank
- AEBS Sleeves
- IPS K24 Cunningham Rods
- RLZ Spec Wiseco Pistons (14.5:1 c/r & 89.5mm bore)
- ACL Race Bearings
- No accessories included
- All parts are brand new, zero miles (the block came out of a wrecked accord with less than 10k)
- I will not part out or disassemble, sorry
$3750 + Shipping


Quaife ATB
-Brand new, Installed into a transmission, however NO MILES
-Includes BRAND NEW bearings and speedo gear
$955 Shipped


Complete EG Bosch Fuel Pump Setup
-Everything is in great condition. Fuel pump and filter are new, less than 50 street miles on all the parts
-Bosch 044 Fuel Pump, Aeromotive 100 Micron Filter, fittings are a mix of Aeromotive, Earls and Summit
-Modified OEM fuel pickup and sock fits perfect in the OEM fuel tank
-Fuel pump mounts to the side of the fuel tank and the filter mounts under the car under the car
-Return line is only from the fuel pickup to the stock feed line, I tied in with a flared fitting, you can use your stock feed line or just run a longer return line and a union
-Feed from the pickup is 8an to the pump, 8an to the filter, and then 6an to the fuel rail, feed is long enough to make it to the fuel rail on a K-Series swapped car
-Includes enough power wiring to run to a relay mounted in the car, Great for an All-Motor Car
$500 Shipped


Hasport EG/DC K Mounts
-Great Condition
-Includes upgraded solid inserts, the extra rubber inserts, and all hardware.
$475 Shipped


Painless Master Disconnect
-Great Condition, like new
-Includes NHRA Approved shut off switch, and power wiring from the battery (located in front fender) to fuse box in stock location.
-Removes the need to run heavy gauge wiring from the front to back of car
-Everything is labeled and wiring has high quality crimp connections
$160 Shipped


Injector Dynamics 725cc Injectors
-Brand new, includes adapters and plugs, great injectors
-Purchase brand new from T1 for $460+shipping
$445 Shipped



T1 Catch Can
- Great Condition, Brand New, Only installed on the car for mockup
-Designed for my K engine, 2 -16an on the top to the valvecover and -10an return
$215 Shipped


K20A Transmission Outer Cases
-Great Condition, One is from K20A2 and the other is a K20A3, both the same thing
$150 Shipped Each

 

SOLD

 

SOLD!!

 

Set of tubes. They read 9.00-13-14. Never used. $60 shipped.


B series into EG motor mounts. Stock, filled with roofing eurathane. Some of the eurathane has seperated as my 500hp car eats transmissions, but can be considered great stock mounts at least. $50 shipped.

 

BNIB garrett/full-race t3/67HO .70 AR comperessor(67mm inducer), journal bearing center section, t3, .82 AR exhaust, coated 1900* black, 3" vband welded on, STG 5 turbine wheel...have my new turbo already, would like this oversized paperweight gone





custom catch pans. fit 92-95 ej/eg-will clear traction bars and 4" downpipe. purchased these from 203 out of CT about 2yrs ago, never used them due to my garage being broken into and most parts stolen. went back to the nissan family and dont need these because they dont fit my se-r

 

B series RPS Carbon Carbon clutch Just freshen like new, NO passes since rebuild 1200$ shipped.