95 Boosted EG PARTOUT
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 566
Likes: 0
From: PSL,Florida
95 Boosted EG PARTOUT
Hi guys,
Due to my current money situation I need to part out my Dyno tuned B16A2 Boosted coupe.
I am selling Everything but some things will not be split up I.E Motor and shell.
This setup made 305whp on 10psi and 368whp on 15psi,The motor runs great with no check
engine lights or any problems for that matter.
It was tuned by Columbia in Orlando,fl
If you have any questions or see something that is not listed yet just ask.
PICS OF THE SHELL ARE ON PAGE 2
OFF topic items: Glock model22 .40cal hi-cap magazine+Factory speedloader $20
-95 civic coupe NO accidents,needs paint,but great body.
Includes 3"exhaust,Skunk2 springs,tokico blues,camber kit, Walbro 255lph pump,
LS seats no rips,+ Full A/C $900
mild BUILT B16A2 block.Block was hot tanked,Milled and honed to 81.5mm.It has micropolished crank. I have recipt still from Machine shop.
Motor has 3K on it,Everything was brand new when installed,ALL Gaskets from HONDA Cost over 300$ in gaskets.
JE 9:1 pistons, Eagle rods, ACL race bearings, ALL ARP bolts Except the headstuds (Cause im keeping them and Head. MOROSO pre tapped Aluminum OIL PAN.
VERY strong motor NO smoke NO leaks just drop in and Drive.
I know there is more but I cant remember. $1450 obo
- polished 38mm Tial WG SOLD!!
- Black tial 50mm BOV SOLD!!
-msd 6al box,2 step,cap,coil. SOLD!!
-Turbonetics t3/t4 .57 SOLD!!
- CF mirrors SOLD!!
-RAZO Heavy shift **** SOLD!!
-Skunk2 dual bend Shortshifter SOLD!!
- Boost/water gauge Autometer SOLD!!
- Amber clock SIR SOLD!! and stock clock SOLD!!
- Pioneer door 5 1/4 180w SOLD!!
-Steering wheel SOLD!!
- Si cluster/red needles SOLD!!
-Drag Manifold + 2 1/2 downpipe A/C compatible SOLD!!
- Precision 600whp Rated I.C. SOLD!!
-ENJO 3 peice motor mounts $100
- DSM 450cc injectors work 100% + grommets pre ground SOLD!!
- 2 1/2" aluminum Intercooler piping EG (Black) with tial 50mm Flange + Couplers and t-bolts $150
- P28 ECU Tuned with Chromedata SOLD!!
- GSR shift linkageLooks BRAND NEW $75
-EARLS SS braided 3an feed and 10AN return line and fittings SOLD!!
- ENDYN CC with moroso filter + SS braided line to VC and block fitting.. $85.
- 3 bar map SOLD!!
- LS tranny only grinds 3rd when hard shifting $290 ACT 6puck and ACT PP extra $90 Under 3k on em
- Fuel cell $100 (will not ship)
Due to my current money situation I need to part out my Dyno tuned B16A2 Boosted coupe.
I am selling Everything but some things will not be split up I.E Motor and shell.
This setup made 305whp on 10psi and 368whp on 15psi,The motor runs great with no check
engine lights or any problems for that matter.
It was tuned by Columbia in Orlando,fl
If you have any questions or see something that is not listed yet just ask.
PICS OF THE SHELL ARE ON PAGE 2
OFF topic items: Glock model22 .40cal hi-cap magazine+Factory speedloader $20
-95 civic coupe NO accidents,needs paint,but great body.
Includes 3"exhaust,Skunk2 springs,tokico blues,camber kit, Walbro 255lph pump,
LS seats no rips,+ Full A/C $900
mild BUILT B16A2 block.Block was hot tanked,Milled and honed to 81.5mm.It has micropolished crank. I have recipt still from Machine shop.
Motor has 3K on it,Everything was brand new when installed,ALL Gaskets from HONDA Cost over 300$ in gaskets.
JE 9:1 pistons, Eagle rods, ACL race bearings, ALL ARP bolts Except the headstuds (Cause im keeping them and Head. MOROSO pre tapped Aluminum OIL PAN.
VERY strong motor NO smoke NO leaks just drop in and Drive.
I know there is more but I cant remember. $1450 obo
- polished 38mm Tial WG SOLD!!
- Black tial 50mm BOV SOLD!!
-msd 6al box,2 step,cap,coil. SOLD!!
-Turbonetics t3/t4 .57 SOLD!!
- CF mirrors SOLD!!
-RAZO Heavy shift **** SOLD!!
-Skunk2 dual bend Shortshifter SOLD!!
- Boost/water gauge Autometer SOLD!!
- Amber clock SIR SOLD!! and stock clock SOLD!!
- Pioneer door 5 1/4 180w SOLD!!
-Steering wheel SOLD!!
- Si cluster/red needles SOLD!!
-Drag Manifold + 2 1/2 downpipe A/C compatible SOLD!!
- Precision 600whp Rated I.C. SOLD!!
-ENJO 3 peice motor mounts $100
- DSM 450cc injectors work 100% + grommets pre ground SOLD!!
- 2 1/2" aluminum Intercooler piping EG (Black) with tial 50mm Flange + Couplers and t-bolts $150
- P28 ECU Tuned with Chromedata SOLD!!
- GSR shift linkageLooks BRAND NEW $75
-EARLS SS braided 3an feed and 10AN return line and fittings SOLD!!
- ENDYN CC with moroso filter + SS braided line to VC and block fitting.. $85.
- 3 bar map SOLD!!
- LS tranny only grinds 3rd when hard shifting $290 ACT 6puck and ACT PP extra $90 Under 3k on em
- Fuel cell $100 (will not ship)
Last edited by boosted28; May 6, 2010 at 04:16 AM. Reason: update
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Oct 2006
Posts: 566
Likes: 0
From: PSL,Florida