I was wanting to do my engine bay and dress it up with some of these washers, I know i can get them from PWJDM for 15$ for 5 bolts and wahers..Kinda expensive so i was wondering if any of you guys know of where i can get them in bulk or what, LMK what you guys got, or is PWJDM my only awnser..Let me know honda tech..

Thanks, NICK

 

you could always get them powdercoated, alot of times powdercoaters have leftover material they don't have use for, so i'd contact someone who powdercoats in your area and see what they can do for you. it should be pretty cheap.

 

Powder coating wouldn't be something I would do on washers, I would look more into getting washers that are the correct size etc, and getting them anodized somewhere locally.

 

i dont know if you like this idea but, i seen my friend used stainless steel finish washers and flat head stainless steel bolts and put them on, to dress all his bolts up. you can get them at hardware stores like osh, ace, home depot and lowes. it looks pretty cool, cheaper too

 

here u go buddy
http://www.clubcivic.com/board/showthread.php?t=139577

 

the washers would be the same ones he had... my friend owns a powdercoating shop and has all of the washers on his bikes coated. tears them apart very regularly and they are fine... but to each his own

 

Hazard you da man!!! lol, Thanks everone else but check that link out!!

Thanks, NICK

 

I wouldn't pay $15 for 5 bolts ever! Especially since they probably charge about $25 to ship them. I have the allen key round type bolts/washers (same style) in stainless steel. They were like $10 for 50 at a hardware store. They look awesome.

 

The guy who painted them in this post had excellent results.

 

i made some with the same stuff that guy used and same steps they looked great!