NY 97 acura integra 4dr ls Fully built part out or sell whole
Pics upon request PM me and ill email you pics. Im in the NY area car had 318HP and 291TQ at 16psi with boost leak. My axle poped out on my going up my drive way and there she sits. Would like to sell Full car. PM me
I have a 97 4dr integra for part out. I have pictures of everything or i can take pics of anything in particular you may want.
Car also has kill switch,shift lock,viper alarm, Axles rated for 500HP and custom hub.
Have the Car fax clean body no accidents Only 81k on the body
Shell has No Rust would sell the shell with Carbon fiber hood, full interior,Wing west lip kit,spolier, Full tokico Blues gas shocks H and R lowering springs. with full nuepseed Struts,sways all around, with blox camberkit.-2500.
Shell with nothing - 900
Motor made 318hp and 291Tq @ 16psi with boost leak. Dyno sheets to prove.
Would like to sell the motor first before i start removing parts that way he/she who buys the motor can hear her run. She runs good and strong only about 25k on build. orginally had 57k before being rebuilt
Fully built LS motor. bored/sleeved 8:1 JE pistons with eagle rods. Fully balanced crank. -2000 with Port and polished LS head
Hasport motor mounts -$200
Full set up Motor head and hasport mounts - 2100
Full race turbonectics turbo kits with sperco intercooler -$1500 (turbo has blown seals)
Custom made turbo back exhaust 3-3 1/2 inch piping.- $ 500 ( not a bumble bee sound either Nice deep sound) Still on car you can hear it run.
Intake manifold - $200
Momo Steering wheel - Jet black (black leather with carbon fiber inserts) $250
Momo Steering wheel hub for Integra - $50 Take both for $275
Mishimoto Raditor - $200
Nuespeed Strut Bar - $100
MSD Ignition Multi Spark Kit. ( Coil,MSD box, Cap and wires)- $150
AEM Fuel Rail - $100
1000cc RC injectors- $300
550cc RC injectors- $200
Turbonectics Delta Gate Mark II Wastegate $ 200
Tial Waste gate $ 180
SX performance Fuel pressure regulator With Guage $100
Apexi Electronic Oil temp gauge- $ 150
Apexi Boost gauge - $100
2 Gauge Pod - $20
Greddy Blow off Type S purple top - $175
6 Rims all MSR rims style 126- $ 500 for all 6 Tires included will throw in an additional 2 rims (ALT.)
AEM Front and rear big Brake kit 12''Fronts - $500 O.B.O Needs new front rotors one is wraped. I have extra brake pads.
AEM plug -n- play - $1000 O.B Updated recently with the newest programing straight from AEM.
This car has alot of stuff done to it i prolly forgot some stuff hit me up for anything you need.
Pictures upon request. Everything is Mint or near mint. Thanks for looking
I have a 97 4dr integra for part out. I have pictures of everything or i can take pics of anything in particular you may want.
Car also has kill switch,shift lock,viper alarm, Axles rated for 500HP and custom hub.
Have the Car fax clean body no accidents Only 81k on the body
Shell has No Rust would sell the shell with Carbon fiber hood, full interior,Wing west lip kit,spolier, Full tokico Blues gas shocks H and R lowering springs. with full nuepseed Struts,sways all around, with blox camberkit.-2500.
Shell with nothing - 900
Motor made 318hp and 291Tq @ 16psi with boost leak. Dyno sheets to prove.
Would like to sell the motor first before i start removing parts that way he/she who buys the motor can hear her run. She runs good and strong only about 25k on build. orginally had 57k before being rebuilt
Fully built LS motor. bored/sleeved 8:1 JE pistons with eagle rods. Fully balanced crank. -2000 with Port and polished LS head
Hasport motor mounts -$200
Full set up Motor head and hasport mounts - 2100
Full race turbonectics turbo kits with sperco intercooler -$1500 (turbo has blown seals)
Custom made turbo back exhaust 3-3 1/2 inch piping.- $ 500 ( not a bumble bee sound either Nice deep sound) Still on car you can hear it run.
Intake manifold - $200
Momo Steering wheel - Jet black (black leather with carbon fiber inserts) $250
Momo Steering wheel hub for Integra - $50 Take both for $275
Mishimoto Raditor - $200
Nuespeed Strut Bar - $100
MSD Ignition Multi Spark Kit. ( Coil,MSD box, Cap and wires)- $150
AEM Fuel Rail - $100
1000cc RC injectors- $300
550cc RC injectors- $200
Turbonectics Delta Gate Mark II Wastegate $ 200
Tial Waste gate $ 180
SX performance Fuel pressure regulator With Guage $100
Apexi Electronic Oil temp gauge- $ 150
Apexi Boost gauge - $100
2 Gauge Pod - $20
Greddy Blow off Type S purple top - $175
6 Rims all MSR rims style 126- $ 500 for all 6 Tires included will throw in an additional 2 rims (ALT.)
AEM Front and rear big Brake kit 12''Fronts - $500 O.B.O Needs new front rotors one is wraped. I have extra brake pads.
AEM plug -n- play - $1000 O.B Updated recently with the newest programing straight from AEM.
This car has alot of stuff done to it i prolly forgot some stuff hit me up for anything you need.
Pictures upon request. Everything is Mint or near mint. Thanks for looking
Pics tomorrow when i get off work.... No axles popped out. Could be bad tranny mount, or the the part of the tranny that drives the axle. But tranny itself is good no hard shifting or pop outs no grinding.
Pics........ Would like to just sell the whole car PM me we can talk on a price. Just need to get something more baby friendly and cop friendly.lol































I have dyno sheets PM me if you really are interested. Car fax.. 82k shell orginal motor was fully built when the shell had 55k. Any other pics you may want let me know
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Merlin00069
Vehicles for sale
6
Jul 27, 2003 05:12 PM




