1992 k20a Drag Civic Part Out
Thread Starter
Honda-Tech Member
Joined: May 2007
Posts: 1,112
Likes: 0
From: cda, idaho, united states
1992 k20a Drag Civic Part Out
Parting out a 1992 Civic drag car. I am trying to determine which parts I will need in the new project and everything else needs to go. I'll update this thread as more parts and pictures are available.
All parts are priced shipped to the lower 48...I will not ship international, sorry. Prices are OBO.
The List:
50mm TWM ITB's with custom K series adapter flanges. SOLD!!
Spearco Air-Water intercooler with welded opposing end tanks. SOLD!!
Solid Axle narrowed rear end for EG Civic This rear end was originally fabricated by MMR USA several years ago. It comes complete with HAL QA1 shocks/springs with 250lb springs, Wilwood single piston calipers (pads included), slotted brake rotors, and lengthed wheel studs for NHRA approval. All hardware for mouting to an EG including shock adapters is included. This would be a bolt in installation. I was able to achieve low 1.5 60ft times WITHOUT traction bars.
$1000.00 Shipped
Fiberglass dash built by MMR USA. This dash fit VERY well in my EG. The front left and right corners were notched slightly to clear the roll bar. The glass got cracked in the front left which was repaired, but should be sanded and re-painted. Guages are NOT included.
$175.00 shipped
All parts are priced shipped to the lower 48...I will not ship international, sorry. Prices are OBO.
The List:
50mm TWM ITB's with custom K series adapter flanges. SOLD!!
Spearco Air-Water intercooler with welded opposing end tanks. SOLD!!
Solid Axle narrowed rear end for EG Civic This rear end was originally fabricated by MMR USA several years ago. It comes complete with HAL QA1 shocks/springs with 250lb springs, Wilwood single piston calipers (pads included), slotted brake rotors, and lengthed wheel studs for NHRA approval. All hardware for mouting to an EG including shock adapters is included. This would be a bolt in installation. I was able to achieve low 1.5 60ft times WITHOUT traction bars.
$1000.00 Shipped
Fiberglass dash built by MMR USA. This dash fit VERY well in my EG. The front left and right corners were notched slightly to clear the roll bar. The glass got cracked in the front left which was repaired, but should be sanded and re-painted. Guages are NOT included.
$175.00 shipped
Last edited by 418whpturboD; Mar 26, 2010 at 03:43 PM.
Trending Topics
Thread Starter
Honda-Tech Member
Joined: May 2007
Posts: 1,112
Likes: 0
From: cda, idaho, united states
Re: 1992 k20a Drag Civic Part Out
No, fuel system is not for sale. Ill sell the front tires w/o wheels. They are 26x8x15 MT drag slicks.
$150.00 for both...shipping extra as these are oversized.
$150.00 for both...shipping extra as these are oversized.
Thread
Thread Starter
Forum
Replies
Last Post
