MD 91 Integra
alright heres the deal i've got a 91 integra its totaled. i've lost interest in cars for the moment so i want this thing gone. REALLY prefer it gone in one piece i don't have time or even feel like trying to part it out. i'm asking 5,000$ for whole car.
the shell is scraped so dont think u can just drive it away. but motor and internals are fine. only missing items so far are wastegate and fuel pump. other then that she would run strong. already tuned on neptune. not some butt tune or street tune.
the car made 407 Whp and 296 Tq wasn't beat on or even daily driven. the motor only has 3k miles on it. block alone was 2500$ not including golden eagle crank etc etc.
any other questions feel free to email me: nolimitlex@comcast.net
i've got pictures and will post them when i get a chance or if special interests
have receipts too if needed for whatever. so without further delay the list.
Mod List
Head
-b16a1 head
-B16 CTR Intake / GSR Exhaust
-Skunk2 adj cam gears
-Stock vavle train
Block (3k miles)
-91 ls block
-Arias Pistons
-Manley rods
-Golden Eagle crank
-Darton Sleeves 2.0L
-Morosco Oil pan
-New TD44U Distributor/Starter/Alternator
LS Trans (cable)
-6 puck ACT clutch (4kmiles)
-Victor X Intake Mani
-70mm Blox Throttlebody
-RFL Blowoff
-Intercooler - Core Length : 24" Core Height: 9" Core Thickness: 3" Inlet Size: 2.5" Outlet Size: 2.5" End to End" Length: 30.5"
-750 RC Intectors
-Converted P28 w/ Neptune
-3"Spoolin Performance Downpipe
-Garrett T3/T04E 57 Trim .63 AR 5bolt
-Blox Exhaust Log Manifold
-3Bar Map sensor
-Dual Stage Manual TurboSmart Boost Controller
-FullRace Traction Bar
-JDM 1Pieces
-Koni Yellows/Eibach Sportline
-Suspension Technique Rear Sway


the shell is scraped so dont think u can just drive it away. but motor and internals are fine. only missing items so far are wastegate and fuel pump. other then that she would run strong. already tuned on neptune. not some butt tune or street tune.
the car made 407 Whp and 296 Tq wasn't beat on or even daily driven. the motor only has 3k miles on it. block alone was 2500$ not including golden eagle crank etc etc.
any other questions feel free to email me: nolimitlex@comcast.net
i've got pictures and will post them when i get a chance or if special interests
have receipts too if needed for whatever. so without further delay the list.
Mod List
Head
-b16a1 head
-B16 CTR Intake / GSR Exhaust
-Skunk2 adj cam gears
-Stock vavle train
Block (3k miles)
-91 ls block
-Arias Pistons
-Manley rods
-Golden Eagle crank
-Darton Sleeves 2.0L
-Morosco Oil pan
-New TD44U Distributor/Starter/Alternator
LS Trans (cable)
-6 puck ACT clutch (4kmiles)
-Victor X Intake Mani
-70mm Blox Throttlebody
-RFL Blowoff
-Intercooler - Core Length : 24" Core Height: 9" Core Thickness: 3" Inlet Size: 2.5" Outlet Size: 2.5" End to End" Length: 30.5"
-750 RC Intectors
-Converted P28 w/ Neptune
-3"Spoolin Performance Downpipe
-Garrett T3/T04E 57 Trim .63 AR 5bolt
-Blox Exhaust Log Manifold
-3Bar Map sensor
-Dual Stage Manual TurboSmart Boost Controller
-FullRace Traction Bar
-JDM 1Pieces
-Koni Yellows/Eibach Sportline
-Suspension Technique Rear Sway


new listing price asking 4,000$ price is negotiable email me questions and i can give a cell# if you need to talk. this has to go so will consider all reasonable offers
and 2 of the 4 rims were damaged. front driver side was gashed about 2-3 inch and rear was gashed all the way around the lip
and 2 of the 4 rims were damaged. front driver side was gashed about 2-3 inch and rear was gashed all the way around the lip
thank you for the bump. price is very negotiable at this point possibly even part out worthy if its not just the one or two items. pm or email me. thing really has to go
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post




