Acura Integra All Integra Except ITR

New to Integra, some questions on lowering

Thread Tools
 
Search this Thread
 
Old Mar 5, 2010 | 05:59 AM
  #1  
Epixman's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 13
Likes: 0
Default New to Integra, some questions on lowering

Hey guys,

Just purchased an integra. Would like to do some few modifications to it. What are the review on parts sold for tegs on ebay? Is it a hit or miss kind of deal or just crap parts?


I see that some lowering springs are dirt cheap...are they any good? or stay away?

http://cgi.ebay.com/ebaymotors/94-01...Q5fAccessories

http://cgi.ebay.com/ebaymotors/94-01...Q5fAccessories


http://cgi.ebay.com/ebaymotors/ACURA...Q5fAccessories

http://cgi.ebay.com/ebaymotors/JDM-L...Q5fAccessories


Thanks guys
Reply
Old Mar 5, 2010 | 06:07 AM
  #2  
Turbodude06's Avatar
Honda-Tech Member
 
Joined: Feb 2010
Posts: 149
Likes: 0
From: GA
Default Re: New to Integra, some questions on lowering

If your going cheap, then just go with the 3rd one's. I have them they ride fine and you can lower it to what ever you want. Most of the time the cheap lower springs don't lower the car but like .5-1.0 inches.... Just invest in good struts when you get a chance...


P.S. your can get them cheaper then that if you look hard enough, they are all made by the same company... I've heard they are the same as the skunk 2's also just without the name, I've had both and they ride the same IMO...


-May the bashing begin lol......
Reply
Old Mar 5, 2010 | 06:43 AM
  #3  
MTAC6's Avatar
Honda-Tech Member
 
Joined: Dec 2009
Posts: 35
Likes: 0
From: Mini-soda
Default Re: New to Integra, some questions on lowering

All the guys will come and tell you to save up and get the Koni/GC combo.
Reply
Old Mar 5, 2010 | 07:18 AM
  #4  
Turbodude06's Avatar
Honda-Tech Member
 
Joined: Feb 2010
Posts: 149
Likes: 0
From: GA
Default Re: New to Integra, some questions on lowering

Originally Posted by MTAC6
All the guys will come and tell you to save up and get the Koni/GC combo.
Yep....
Reply
Old Mar 5, 2010 | 07:51 AM
  #5  
Epixman's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2009
Posts: 13
Likes: 0
Default Re: New to Integra, some questions on lowering

yea I'm not looking to throw in a ton of money on my integra. I didn't pay much for it, and just want a nice drop on it. Going for the cheapest route possible, but don't want to get anything that will crap out in month.

I spend most of my money on my audi, but got the integra for a daily to keep my miles low on the audi.
Reply
Old Mar 5, 2010 | 08:13 AM
  #6  
BoltonGSR's Avatar
Honda-Tech Member
 
Joined: Jul 2006
Posts: 1,312
Likes: 0
From: Oklahoma/Texas
Default Re: New to Integra, some questions on lowering

Eibach prokit springs $120 If (I remember correctly)

Used KYB AGX (Should be able to purchase for less than $300)
Reply
Old Mar 5, 2010 | 08:18 AM
  #7  
Kensai's Avatar
Honda-Tech Member
 
Joined: Mar 2009
Posts: 570
Likes: 0
From: California
Default Re: New to Integra, some questions on lowering

Those are all garbage, if anything just get Tein or H&R. They're like $150 or something like that, but you get quality.
Reply
Old Mar 5, 2010 | 10:21 AM
  #8  
MTAC6's Avatar
Honda-Tech Member
 
Joined: Dec 2009
Posts: 35
Likes: 0
From: Mini-soda
Default Re: New to Integra, some questions on lowering

Originally Posted by Epixman
yea I'm not looking to throw in a ton of money on my integra. I didn't pay much for it, and just want a nice drop on it. Going for the cheapest route possible, but don't want to get anything that will crap out in month.

I spend most of my money on my audi, but got the integra for a daily to keep my miles low on the audi.


I don't know man. If I had another car that I like to spend $$ on, I wouldn't even dare to spend $$ on a DD. Unless it's my only car.
Reply
Old Mar 5, 2010 | 12:35 PM
  #9  
Turbodude06's Avatar
Honda-Tech Member
 
Joined: Feb 2010
Posts: 149
Likes: 0
From: GA
Default Re: New to Integra, some questions on lowering

Originally Posted by BoltonGSR
Eibach prokit springs $120 If (I remember correctly)

Used KYB AGX (Should be able to purchase for less than $300)
Originally Posted by Kensai
Those are all garbage, if anything just get Tein or H&R. They're like $150 or something like that, but you get quality.
^Those 2 make a good point too....
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
slickBB1
Mid-West (Sales)
1
Aug 10, 2016 12:33 PM
TOO MUCH TORQUE
Northern California (Sales)
2
Jul 25, 2011 04:02 PM
w211 ryda
For Sale
10
Nov 6, 2010 06:49 PM
TeamNextGenChris
For Sale
1
Sep 27, 2004 06:53 PM
SivikHatch
For Sale
2
Jul 9, 2004 01:37 PM




All times are GMT -8. The time now is 11:19 AM.