like topic says i got an S1 tranny , my clutch is goin out and i recently bought a new one , an Act Stage 3 with the heavy dute Pressure plate (H-025) and i got the 6 puck disk (6P220J)

My question is, the disk was made for a us 92-93 integra correct?

well ive heard i gotta use a clutch from a 90-91 integra?

so can someone help me out before i start rippin my tranny off???? Thanks

 

you need a disk for a 90-91 teg otherwise you may strip the splines off the input shaft with some abuse.

 

If the transmission is a 90-91 you need a 90-91 clutch disc.

If it is a 92+ you need a 92+ clutch disc.

You can technically put a 92+ clutch on a 90-91 transmission, but I have seen the clutch strip out of the mainshaft on a hard launch.

If it's a JDM S1 it's going to need a 90-91 disc.