Since i cannone seem to figure out my aicv wiring, I decided I would just run a new wire, to the ecu. I found this helpful for one of the wires(http://www.superhonda.com/forum/f55/...inouts-217405/), but where does the other wire go to, just a ground? and which is which? thanks.

 

ran the green wire to the ecu, and the black to ground, and it ran like it would without it plugged in, so I switched them around, and I'm back to where I started.

So as of now, I have the green to ground, and the black ran to pin 9(acording to the pinout on the superhonda site).

any input?

 

anyone have some input?

 

What year is the car?

 

99 civic hx. b16a1, with a p30 ecu

 

so you have a jumper harness to OBDI?

 

yes sir

 

You do have the wire in the correct pin on the ECU, Is your ground good? Id get a multi meter and see if youre getting power to the IACV

 

I'm gunna see if I can borrow one, mine got ran over

and it is grounded to a good ground, and I used the pinout from the superhonda page.

 

bump for some more input, hopefully gunna test it tonight for voltage