Blowout time! GSR shortblock w/goodies, ITR heads, Traklite 2.0 wheels + much more!
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 18
Likes: 0
From: Port Orchard, WA
Blowout time! GSR shortblock w/goodies, ITR heads, Traklite 2.0 wheels + much more!
I am not racing at the moment and I need some cash to pay pay my racing sponsors- Visa and Mastercard- so here are some stupid deals... come take advantage of me (I will post some pics soon):
1. PR3 (ITR) heads (I have 2)- these do not have cams or valve covers but otherwise complete, stock, and totally unmolested. $750/ea -1 sold so only 1 left!
2. B18C1 shortblock with ITR crank, rods, and pistons. With full price offer, I will let it go with the baffled oil pan and the ACT Pro-lite flywheel and 6-puck disk that are attached to it. (Please note that this shortblock was my spare engine and some of the breathers have been modified). $1500/obo
3. T1R 70mm axleback exhaust for EK hatchbacks (will fit coupes and 4dr but you have to lengthen the B-pipe?) I tested a ton of exhausts for the World Challenge car and this one worked best-that's probably all that has to be said. $450
4. Motegi Traklite 2.0 wheels- 2 sets available, 17x8, 4x100. Extremely lightweight forged wheel at 6.7kg each. Over $330/ea new but I am offering a set of 4 for $700 which includes the Hankook slicks that are mounted on them! $700/set of 4
5. Konig Heliums- 1 set, 17x7, 4x100. One wheel has damage on the inner lip but still holds air and balances out. Other 3 wheels are perfect. $200/set
6. AEM fuel pressure regulator- new in the box. $90/obo
7. SRR rear toe kit- in perfect shape. $50
8. Omni Power front upper camber-adjustable arms with the entire upright/hub which has long ARP wheel studs, new wheel bearings, and J's racing lugs (basically the whole front suspension minus the lower control arm and damper). $275
9. Fiberglass hood- fits EK. This is not a car show piece but a race piece. It requires pins (no hinges). It is VERY lightweight- maybe 3-4 lbs no kidding. There is some damage to the front left corner that needs some simple fiberglass repair which is why I am selling it for $100 instead of the $400 it would normally be. $100 firm
Located in Kitsap county.
I am terrible about checking PMs so if you want a fast reply it is better to call me at (360) 471-8566.
1. PR3 (ITR) heads (I have 2)- these do not have cams or valve covers but otherwise complete, stock, and totally unmolested. $750/ea -1 sold so only 1 left!
2. B18C1 shortblock with ITR crank, rods, and pistons. With full price offer, I will let it go with the baffled oil pan and the ACT Pro-lite flywheel and 6-puck disk that are attached to it. (Please note that this shortblock was my spare engine and some of the breathers have been modified). $1500/obo
3. T1R 70mm axleback exhaust for EK hatchbacks (will fit coupes and 4dr but you have to lengthen the B-pipe?) I tested a ton of exhausts for the World Challenge car and this one worked best-that's probably all that has to be said. $450
4. Motegi Traklite 2.0 wheels- 2 sets available, 17x8, 4x100. Extremely lightweight forged wheel at 6.7kg each. Over $330/ea new but I am offering a set of 4 for $700 which includes the Hankook slicks that are mounted on them! $700/set of 4
5. Konig Heliums- 1 set, 17x7, 4x100. One wheel has damage on the inner lip but still holds air and balances out. Other 3 wheels are perfect. $200/set
6. AEM fuel pressure regulator- new in the box. $90/obo
7. SRR rear toe kit- in perfect shape. $50
8. Omni Power front upper camber-adjustable arms with the entire upright/hub which has long ARP wheel studs, new wheel bearings, and J's racing lugs (basically the whole front suspension minus the lower control arm and damper). $275
9. Fiberglass hood- fits EK. This is not a car show piece but a race piece. It requires pins (no hinges). It is VERY lightweight- maybe 3-4 lbs no kidding. There is some damage to the front left corner that needs some simple fiberglass repair which is why I am selling it for $100 instead of the $400 it would normally be. $100 firm
Located in Kitsap county.
I am terrible about checking PMs so if you want a fast reply it is better to call me at (360) 471-8566.
Last edited by humble2; Feb 14, 2010 at 08:10 PM.
Re: Blowout time! GSR shortblock w/goodies, ITR heads, Traklite 2.0 wheels + much mor
BUMP FOR THIS SELLER !!!!! BOUGHT HIS ITR HEAD & PORTED ITR MANIFOLD,ITR TB. VERY HONEST GUY.IVE SEEN THE REST OF HIS STUFF FOR SALE THEY ARE IN MINT SHAPE I MEAN FLAWLESS.2ND BUMP FOR HIM JUST BECOZ HIS A TRUE RACE CAR DRIVER........
HEY RAYMOND THIS IS JAY ... THNX FOR EVERYTHING MAN !!!!!!!!!!!!!!!!!!!!!
HEY RAYMOND THIS IS JAY ... THNX FOR EVERYTHING MAN !!!!!!!!!!!!!!!!!!!!!
Last edited by dumaguetecity; Feb 18, 2010 at 06:54 PM.
Re: Blowout time! GSR shortblock w/goodies, ITR heads, Traklite 2.0 wheels + much mor
yeah i bought one of his itr head. when i was there i was able to choose between 2 itr heads. so i choose the 2000 itr head. whats left for sale is 96 itr head i think.. but it was mint condition either way but BUMP for RAYMOND VERY GOOD SELLER !!!!!!!
best way to get a hold of him is to call him and leave a message
best way to get a hold of him is to call him and leave a message
Thread
Thread Starter
Forum
Replies
Last Post
