B-Series Turbo Bits & Turbonetics T3/T4 Turbo
Prices are all before shipping, although I'm happy to ship but you get to pay shipping.
PayPal, Check, & Cash are the only accepted forms of payment.
*I will accept checks drawn off US banks but will not send the part out until the check clears.*
All turbo parts have 280 highway miles on them, seriously I never even got a chance to get on the car because I didn't have my LSD in yet... too late now.
Tuned ECU (ectune, tuned for 13.5lbs of boost on a GSR motor, with the turbo that is also listed here, EVO injectors, Edelbrock VictorX Intake Manifold, made 297 hp) - $450 obo.
I'm just trying to recoup part of the cost of the dyno tune. Was tuned by John Vega of Pherable.net. If you have a similar set-up to me this will definitely be cheaper than dyno-tuning your car.
Cast Turbo GSR Manifold - $200 obo
Turbonetics T3/T4 Turbo (specs below) - $800 obo
Front Mount Intercooler - $150
Blow Off Valve (Type-RS) - $50
38mm Wastegate 7 PSI Spring - $75
Downpipe - 3" exhaust - $75
Other Parts that are also available:
JDM B18C GSR w/ ARP Head Studs (approx. 60k, likely less), comes with EVO 560cc injectors. I'm not parting this out any further. - $2600 obo (I'M WILLING TO FREIGHT THIS AT THE BUYERS EXPENSE.)
Edelbrock Victor X Intake Manifold - $375 obo
B&M Fuel Pressure Regulator - $50
Turbo Specs:
Maximum Horse Power 375-400 HP
Type of Cooling Oil and Water Cooled
Inlet Size 3"
Outlet Size 2"
Compressor .50 AR Compressor
Compressor Wheel Exducer: 2.36" , Inducer 2.07"
Turbine .63 AR Turbine
Turbine Wheel Exducer: 2.89" , Inducer 2.48"
Type of Flange T3
Type of Down Pipe Flange Standard 5 bolt
PayPal, Check, & Cash are the only accepted forms of payment.
*I will accept checks drawn off US banks but will not send the part out until the check clears.*
All turbo parts have 280 highway miles on them, seriously I never even got a chance to get on the car because I didn't have my LSD in yet... too late now.
Tuned ECU (ectune, tuned for 13.5lbs of boost on a GSR motor, with the turbo that is also listed here, EVO injectors, Edelbrock VictorX Intake Manifold, made 297 hp) - $450 obo.
I'm just trying to recoup part of the cost of the dyno tune. Was tuned by John Vega of Pherable.net. If you have a similar set-up to me this will definitely be cheaper than dyno-tuning your car.
Cast Turbo GSR Manifold - $200 obo
Turbonetics T3/T4 Turbo (specs below) - $800 obo
Front Mount Intercooler - $150
Blow Off Valve (Type-RS) - $50
38mm Wastegate 7 PSI Spring - $75
Downpipe - 3" exhaust - $75
Other Parts that are also available:
JDM B18C GSR w/ ARP Head Studs (approx. 60k, likely less), comes with EVO 560cc injectors. I'm not parting this out any further. - $2600 obo (I'M WILLING TO FREIGHT THIS AT THE BUYERS EXPENSE.)
Edelbrock Victor X Intake Manifold - $375 obo
B&M Fuel Pressure Regulator - $50
Turbo Specs:
Maximum Horse Power 375-400 HP
Type of Cooling Oil and Water Cooled
Inlet Size 3"
Outlet Size 2"
Compressor .50 AR Compressor
Compressor Wheel Exducer: 2.36" , Inducer 2.07"
Turbine .63 AR Turbine
Turbine Wheel Exducer: 2.89" , Inducer 2.48"
Type of Flange T3
Type of Down Pipe Flange Standard 5 bolt
Thread
Thread Starter
Forum
Replies
Last Post
slowcrxsib16
Classifieds: Forced Induction
5
Dec 5, 2007 05:37 PM




