So hi guys im currently in the process of changing my clutch in the snow and i ran into the bitch pin and i was wondering if i could drop the transmission alittle bit with the linkage still attached and change the clutch or would i have to remove the linkage from the end and then drop it?

 

you should be able to drop it with the linkage attached.

 

that pin can be a bitch ain't it. well i wouldnt recommend droppin the gearbox with the linkage attached. I never tried it be4. but a simple way to remove the pin is to get a small bolt, about the same size of the pin or a little smaller, line it up to the pin, and use a hammer and pound the bolt which will strike the pin. jus use the bolt and pound it right through. pin should be out in 2 mins the most.