+.::*FULL BUILT TYPE R (B18C) HEAD; SUPERTECH INTERNALS*::.+
Thread Starter
Honda-Tech Member
Joined: Apr 2009
Posts: 375
Likes: 0
From: Arizona
+.::*FULL BUILT TYPE R (B18C) HEAD; SUPERTECH INTERNALS*::.+
Hey guys, i have up for sale my complete fully built b18c (type r) PR3-2 head that came off a 96' integra type r. Sent out to Rs Machine in Ca and had the work performed to it:
Hot tank
milled/decked
3 angle valve job
pnp'd intake & exhaust side
flows 285cfm
42cc chambers
Supertech valves, dual valve springs, and ti retainers,
and had it all assembled together. Headwork + labor was $1,980.
That was back in September 2008. The head has right around the 5,000 mile mark so pretty new actually. This will come complete w/ everything js no dizzy or cams/cam gears. For an added price i can throw in some oem gsr's js so all u need is to buy a dizzy (distributor) and your ready to drop it in. Will also be including my custom power coated valve cover i had paint matched EBP for my 2000 Civic Si w/ aslo my mugen oil cap. I will also be including my billet Golden Eagle cam seal for this head. Once again; this is far from stock and all it needs is to have the surface cleaned/decked and you are set w/ a beautiful head! Sold as is no warranty or refunds =]
623.565.7319 *Austin*
Looking to get $875obo "reasonable" offers will def not be refused trust me. Need this gone A.S.A.P to help with my down payment on other things
**PS** if yur gunna use Paypal, dnt forget to add 3% for the purchase. And i will cover shipping costs.
Hot tank
milled/decked
3 angle valve job
pnp'd intake & exhaust side
flows 285cfm
42cc chambers
Supertech valves, dual valve springs, and ti retainers,
and had it all assembled together. Headwork + labor was $1,980.
That was back in September 2008. The head has right around the 5,000 mile mark so pretty new actually. This will come complete w/ everything js no dizzy or cams/cam gears. For an added price i can throw in some oem gsr's js so all u need is to buy a dizzy (distributor) and your ready to drop it in. Will also be including my custom power coated valve cover i had paint matched EBP for my 2000 Civic Si w/ aslo my mugen oil cap. I will also be including my billet Golden Eagle cam seal for this head. Once again; this is far from stock and all it needs is to have the surface cleaned/decked and you are set w/ a beautiful head! Sold as is no warranty or refunds =]
623.565.7319 *Austin*
Looking to get $875obo "reasonable" offers will def not be refused trust me. Need this gone A.S.A.P to help with my down payment on other things
**PS** if yur gunna use Paypal, dnt forget to add 3% for the purchase. And i will cover shipping costs.
Last edited by +.::*SLOW_EM1*::.+; Feb 9, 2010 at 11:56 AM.
Thread Starter
Honda-Tech Member
Joined: Apr 2009
Posts: 375
Likes: 0
From: Arizona
Re: +.::*FULL BUILT TYPE R (B18C) HEAD; SUPERTECH INTERNALS*::.+
considering that its completely built and i kno the economy is pretty shitty and i got a pretty good tax return i'd sell it for $850 ish... ?! or $875 with oem gsr's cams + cam gears
Thread Starter
Honda-Tech Member
Joined: Apr 2009
Posts: 375
Likes: 0
From: Arizona
Re: +.::*FULL BUILT TYPE R (B18C) HEAD; SUPERTECH INTERNALS*::.+
got some offers. keep them coming in. i can also have this head decked/milled taking off the bare minimum and have the valves resurfaced for an added cost if u desire. so @ that point, the head is basically brand new. OEM valve stem seals and guides replaced 3000 miles ago 
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
+.::*SLOW_EM1*::.+
Classifieds: Forced Induction
20
Feb 22, 2010 10:53 AM
fully ported b18 head,fresh b18c bare head,aem cam gears,loss motion ass,fresh valve job valves, and
b18sihatch
Classifieds: Forced Induction
2
May 10, 2007 07:46 PM
