ls vtec priming oil system for the first time
Thread Starter
Honda-Tech Member
Joined: Sep 2007
Posts: 118
Likes: 0
From: Federal Way, wa, united states
ls vtec priming oil system for the first time
So trying to start my motor (ls vtec with GE kit) for the first time. My question is whats the minimum time to crank the motor to build pressure in the oil system and start seeing oil coming out the head? do i need to have the ECU connected for this prosses? just to let you guys know that i'm using the 30W non detergent oil. tnx!
Honda-Tech Member
iTrader: (1)
Joined: Oct 2005
Posts: 9,716
Likes: 3
From: 99 probs but a stolen car aint 1, ca, cerritos/fullerton
Re: ls vtec priming oil system for the first time
We allways just unplug the dizzy and turn the car over for about a min in 7 sec turns. I seen some people pull the vc off to make sure there is oil reaching the top.
Honda-Tech Member
Joined: Dec 2009
Posts: 183
Likes: 0
From: New Mexico
Re: ls vtec priming oil system for the first time
Dude vtec gets oil fast from the sending unit. Your acting like you just rebuilt the motor!This is like saying i need to prime my vtec solenoid everytime i start my car. It will reach oil before the car turns on, anyways vtec wont budge or ingage movement untill 45 55 or so RPMs.
Honda-Tech Member
Joined: Jul 2004
Posts: 5,957
Likes: 0
From: nothing is real unless it is observed
Re: ls vtec priming oil system for the first time
Dude vtec gets oil fast from the sending unit. Your acting like you just rebuilt the motor!This is like saying i need to prime my vtec solenoid everytime i start my car. It will reach oil before the car turns on, anyways vtec wont budge or ingage movement untill 45 55 or so RPMs.
Please stop posting your nonsense
Thread
Thread Starter
Forum
Replies
Last Post
