95 GSR sedan chassis, no engine, race project...
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 12
Likes: 0
From: redding ca
95 GSR sedan chassis, no engine, race project...
$3,500 for the chassis, stock GSR engine, GSR transmission, and GSR jackson racing supercharger!
$1,700 for the chassis alone
$2,200 for a stock GSR engine and jackson racing supercharger
I've got this 4 door integra project race car sitting at my dads house, and I've decided I no longer want to finish it.
The idea was a 4 door, turbo ed, sleeved, roll cage, full interior car...
Sent the engine out to be built, while the engine was out I pulled the windshield and rear window to have the cage installed.
Got everything back and decided I'm just going to get myself into trouble with this, lol.
So, 95 integra GSR, 4 door, clean title, roll cage with swinging door bars, JDM ITR conversion with HID's, 17" buddy club P1's, fresh tires, coilovers(don't remember which ones), greddy 60mm wide band air fuel, and boost gauges included.
The car is mostly in primer, needs to be finished. Windshield was cracked during removal but rear window is fine. Have all the interior, although its not installed.
before the cage
how it is sitting now
I'm located up in Redding, if you got the trailer and cash hit me up
Also have the built engine available,
b18c1 bottom end, darton sleeves, JE 9:1 pistons and wrist pins, crower rods, stock crank. $2250
p72 top end, ported/polished, 3mm oversized valves, upgraded springs, everything, $1250
Buy the top and bottom end together for $3500 and I will throw in the ARP headstuds, and a set of JUN turbo high lobe cams
$1,700 for the chassis alone
$2,200 for a stock GSR engine and jackson racing supercharger
I've got this 4 door integra project race car sitting at my dads house, and I've decided I no longer want to finish it.
The idea was a 4 door, turbo ed, sleeved, roll cage, full interior car...
Sent the engine out to be built, while the engine was out I pulled the windshield and rear window to have the cage installed.
Got everything back and decided I'm just going to get myself into trouble with this, lol.
So, 95 integra GSR, 4 door, clean title, roll cage with swinging door bars, JDM ITR conversion with HID's, 17" buddy club P1's, fresh tires, coilovers(don't remember which ones), greddy 60mm wide band air fuel, and boost gauges included.
The car is mostly in primer, needs to be finished. Windshield was cracked during removal but rear window is fine. Have all the interior, although its not installed.
before the cage
how it is sitting now
I'm located up in Redding, if you got the trailer and cash hit me up
Also have the built engine available,
b18c1 bottom end, darton sleeves, JE 9:1 pistons and wrist pins, crower rods, stock crank. $2250
p72 top end, ported/polished, 3mm oversized valves, upgraded springs, everything, $1250
Buy the top and bottom end together for $3500 and I will throw in the ARP headstuds, and a set of JUN turbo high lobe cams
Last edited by RideIcon; Feb 1, 2010 at 07:53 PM.
![Black-Ty [EG6]'s Avatar](https://honda-tech.com/forums/customavatars/avatar999547556_3.gif){kind=avatar}
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 12
Likes: 0
From: redding ca
Re: 95 GSR sedan chassis, no engine, race project...
I can include a stock GSR engine, transmission, and a jackson racing supercharger with this chassis
Last edited by RideIcon; Jan 17, 2010 at 02:27 AM.
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 12
Likes: 0
From: redding ca
Re: 95 GSR sedan chassis, no engine, race project...
that deal is only to sweeten the deal with the car. not selling the stock engine alone.
Last edited by RideIcon; Jan 10, 2010 at 01:40 AM.
Trending Topics
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 12
Likes: 0
From: redding ca
Re: 95 GSR sedan chassis, no engine, race project...
Have a GSR engine to go with it and the original transmission as well.
Don't want to, don't have the original intake manifold to go with the car, trying to make it as complete as possible.
all it will need is a clutch and flywheel, misplaced mine, and a distributor unless i still have mine. On and a cam seal is missing on the engine i got, couple little parts.
Last edited by RideIcon; Feb 1, 2010 at 07:54 PM.
Honda-Tech Member
Joined: Jun 2004
Posts: 1,541
Likes: 0
From: South Sac
Re: 95 GSR sedan chassis, no engine, race project...
yes, took the original engine out and went a little hardcore on the build.
Have a GSR engine to go with it and the original transmission as well.
Don't want to, don't have the original intake manifold to go with the car, trying to make it as complete as possible.
all it will need is a clutch and flywheel, misplaced mine, and a distributor unless i still have mine. On and a cam seal is missing on the engine i got, couple little parts.
Guess I can do $2,500 for a stock GSR engine and jackson racing supercharger together.
Have a GSR engine to go with it and the original transmission as well.
Don't want to, don't have the original intake manifold to go with the car, trying to make it as complete as possible.
all it will need is a clutch and flywheel, misplaced mine, and a distributor unless i still have mine. On and a cam seal is missing on the engine i got, couple little parts.
Guess I can do $2,500 for a stock GSR engine and jackson racing supercharger together.
"shell" price come with the rims? or what? be more specific..
i think everybody scared of the cage and the paint....
if i didn't have my ek coupe i'll think about this
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 12
Likes: 0
From: redding ca
Re: 95 GSR sedan chassis, no engine, race project...
Buddy Club P1's, 17" comes with, yes
Thread
Thread Starter
Forum
Replies
Last Post
