B18CR Head identification??
Thread Starter
Junior Member
Joined: Dec 2009
Posts: 11
Likes: 0
From: Malaysia
B18CR Head identification??
Anybody can help me identifying the ORIGINAL B18CR Head??
Is it stamp with "PR3"??
Pics & links to other thread or photos would help & highly appreciated.
TQ
Is it stamp with "PR3"??
Pics & links to other thread or photos would help & highly appreciated.
TQ
FSAE
Joined: Jan 2002
Posts: 5,495
Likes: 1
From: Drinking Beer, UT
Re: B18CR Head identification??
PR3-X
X is any number between 1 and 4.
This is the same casting as any B16/B17/CTR/ITR head, and cannot be identified by simply referencing the stamp ID.
Look for green paint by the distributor, or if the head is off the vehicle, look for the blended port work that starts by the valve guide and ends at the valve seat. You will need to clean the ports well to see the machine work.
X is any number between 1 and 4.
This is the same casting as any B16/B17/CTR/ITR head, and cannot be identified by simply referencing the stamp ID.
Look for green paint by the distributor, or if the head is off the vehicle, look for the blended port work that starts by the valve guide and ends at the valve seat. You will need to clean the ports well to see the machine work.
Thread
Thread Starter
Forum
Replies
Last Post
porofek
Acura Integra Type-R
5
Apr 12, 2019 08:58 AM
90B16aCRXsi
All Motor / Naturally Aspirated
10
Dec 30, 2007 05:46 PM
