EH3 Civic Part Out - Built B18C Swap, Lots of Parts!

Closed Thread Subscribe

Thread Tools

Search this Thread

Dec 11, 2009 | 05:15 PM

Blazin Si

Thread Starter

Honda-Tech Member

Joined: Jan 2002

Posts: 2,351

Likes: 154

From: Charlotte, NC

EH3 Civic Part Out - Built B18C Swap, Lots of Parts!

My '92 Si had a passenger side collision, but the rest of the car is intact. I'm parting everything out, so let me know what you need. All parts were purchased brand new and all mods have less than 5k miles on them.

I would also like to deal ONLY with members in the Mid Atlantic and Southern states.

JDM GSR Head Includes:
• Alaniz Ported and Polished Head
• Alaniz 3 Angle Valve Job w/ New GSR Valves
• Rocket Motorsports M22xx Cams
• Skunk2 Valve Springs
• Skunk2 Titanium Retainers
• Skunk2 Cam Gears
• CTR Valve Cover
----------------------------------------------------------------

• * Skunk2 Stage 1 Cams w/ less than 3k miles (I bought these new, but wanted more top end power so they were swapped out for the M22xx's)
• Skunk2 Intake Manifold - This was the original IM without the Skunk2 logo)
• Hondata Heat Shield Gasket
• 64mm Throttle Body w/ All Sensors
----------------------------------------------------------------

Intakes:
• J's Racing "whale *****" Replica Intake w/ K&N Air Filter
• Custom Short Ram Intake w/ Aluminum Velocity Stack and K&N Air Filter (This also includes an extension that fits through the headlight for drag racing applications)
----------------------------------------------------------------

Exhaust:
• DC Stainless "JDM" 4-1 Header w/ 2.5" Collector (The lower hanging tubes have scrapes and dents. Nothing too bad and I can post pictures if requested.)
• Custom Stainless Kteller Exhaust w/ Magnaflow Resonator and Muffler (It's painted black w/ a stainless 2.5" tip to look OEM. This Exhaust also bolts directly to the header. No separation for a cat.)
----------------------------------------------------------------

JDM GSR Block Includes:
• Balanced Rotating Assembly
• Eagle H-Beam Rods
• Arias Forged Pistons 11:1 c/r (These pistons were also teflon and ceramic coated by Calico Coatings)
• ACT 12 lb Flywheel
• Includes all the Pulleys
• New ITR Oil Pump (OBD II)
• New OEM Water Pump
• New OEM Oil Pan
----------------------------------------------------------------

• JDM GSR Tranny w/ Exedy Stage II Clutch and OEM LSD
• P28 ECU w/ Hondata S100 Installed
• Hasport Engine Mounts for B series 92-95 Civic
----------------------------------------------------------------

Suspension
• OmniPower EG Street Coilovers
• OmniPower Gold LCA's
----------------------------------------------------------------

Wheels
• 16" Rota GT3's w/ Falken Azenis RT-615's 205/40/16 (One wheel has some scrapes on the lip, but is dent free.)
----------------------------------------------------------------

I have a brand new OEM optional audio console and OEM arm rest. I also have the entire Si Black OEM interior including the rear deck lid. The passenger seat has a cigarette burn from my ******* brother. It happened 5 years ago and I'm still pissed about it. Overall the interior is an 8.5 out of 10 except for the seat, passenger side door and B pillar plastic probably has broken clips from the accident. I can check it out if requested.

Everything else is still intact. Headlights, amber corner lights, tail lights, all the glass, hubs, Integra axels, brakes (including rear disks), a/c, cruise control assembly etc... I also have a brand new (still in box) Integra single core radiator as well as a used Del Sol VTEC dual core radiator.

Make offers! If it's reasonable, it's yours. PM me the offers or email me at:
msteele.mgs@gmail dot com

I don't want to make any trades. I am buying a house very soon so I'd like to put the money towards the down payment.

Thanks for looking!

Last edited by Blazin Si; Dec 11, 2009 at 05:46 PM.