I'm thinking about buying some 16x7 +45 offset slipstreams for my 99 si and I want to see what it would look like before I buy.

Thanks

 

Im not one to be an ******* but if you can't find pictures of this by searching on here, google, or any other honda forum for that matter, you should not be using the internet.

 

LOL at your ignorance. Yes there are plenty of pictures of civics with 16x7 +45 slips, but since people dont put their size,width, and offset under the picture of their civic on slips I dont know what size the slip is that im looking at.

 

16x7 +45 offset slipstreams

 

Thank you and what size tires are your using?

 

You ask a questions like this and you say he is ignorant. A 16x7 +45 is the most common slip stream there is. If you have never seen that size slip, then you sir are ignorant. Just go to any little import meet and you will have your answer.

 

i see what you're saying, but in his defense, the rota slipstream is such a common wheel in a common offset that its not hard to imagine or just look at some pics.

besides, why do you want rotas

 

*

 

1) Im not good at determining the offset of a wheel just by looking at picture, hence the reason why I started this thread. You may be able to do that, but Im not you.

2) Because their cheap, isnt that why everyone buys them? Its just for my DD. Name me another brand new fully polished wheel in the same price range.

3) I dont understand why everyone thinks I can tell the difference between a +45 offset and a none +45 offset? If i could then I would not have started this thread.

 

I prolly have seen that size slip but I REPEAT without the picture being labeled as +45 offset I cant tell the difference. Maybe you can tell the difference, but Im not you. Also I have never been to an import meet and prolly never will, its not my thing. I dont understand why everyone thinks I can tell the difference between a +45 offset and a none +45 offset? If i could then I would not have started this thread.

 

205 / 45 / 16

Regards

 

hahahaha Oy vay. I stick up for many people but this is retarded. If you spend a week on ht you will see that rota is VERY common, that the slipstream is probably the most common rota, and that the size your looking for is probably the second most common size youll find. Other then 15 in with the same offset or 5 less. WHICH WOULD LOOK SO SIMILAR I DOUBT YOUD TELL THE DIFFERENCE.

If your find a picture of a civic with rota slipstreams i pretty much promise you they are either 15 or 16 in with a +45 offset.

I googled civic slipstream 16in and found a ton of pics on the first page, all of which are most likely 40 or 45 offset. One link led to honda-techs own slipstream thread which has nothing but people posting their size and fit of a rota... like other people actually care. Sorry to dog you, but this is like asking if the japanese integra has accord lights.

https://honda-tech.com/forums/showth...009900&page=70
Scroll down. The blue one is what you want and BELIEVE ME, I dont know any more about hondas or offset then you do.

http://images.google.com/images?hl=e...=&aqi=&start=0

 

LOL at you because you cant tell if the slip your looking at is 40 or 45! So your argument that I am retarded for not knowing if the slipstream in the picture is +45 or not goes:
"I googled civic slipstream 16in and found a ton of pics on the first page, all of which are most likely 40 or 45 offset."

You cant tell if the offset is 40 or 45 just like me, which is why I'm asking for +45 only.

Yes the blue one is exactly what i want, I just want to make sure they are 16x7 +45 before I drop my hard earned money on some polished slips

 

Thank You

 

I didnt say you were retarded for not knowing the difference genius. I said you wouldnt be wasting your hard earned cash cause IT LOOKS THE SAME. Which was my point all along but that went clear over your head. So google it and no matter what you see, 40 or 45 offset, itll look damn near the same to either of us. I stated obviously 15 and 16 will look different but Id assume you can tell THAT difference. If not put a few pictures side by side and if you still cant figure it out you dont belong around machines with moving parts.

 

save up for some real wheels, u'll feel alot better bout that hard earned cash. imo. oem before rota!

 

I just don’t understand why I have to keep repeating myself. "Post pics not your opinions"

1) This thread is not titled "I would like usdmJON's opinion on what wheels I should buy". So I don’t understand why you keep posting your opinions in my thread?

2) The title clearly states "Pic Request" but yet my thread has only one post that contains pictures. Reading comprehension scores by all of the posters except one is at 0!

 

Are you fcking kidding me dude? Show me once, ONCE, where I gave you my opinion on the rims you want? I was right, you dont belong around moving parts if your literally THIS bad at spotting the obvious.

The ONLY, and I repeat ONLY, point I made here is that the rim you are looking for is probably the most common rim posted on honda-tech and there is NO POINT TO THIS THREAD. Again, those bold words are the only point I and most other users are stating. I never once gave you my opinion on your rims. Again, I will state you don't see the obvious. No one is giving you pictures NOT because they have poor reading comprehension skills. But because they think this thread is RETARDED and you should look for yourself. You have poor imagination skills. I myself posted two links where you can find many pictures. Make yourself look like more of an idiot and post again, PLEASE.

 

Seriously what part of "Post pics not your opinion" do you not comprehend? How many times do I have to type that phrase before you will be able to comprehend it?

 

And again, Im not giving you my opinion. It's fact that this thread is a waste of space. Take 20 seconds playing Sherlock Holmes and you'll find a bunch of pictures about what your looking for. You should loosen up a bit. Toke the ticaaal maybe.

 

slipstrems are like a village bike everybody has rode on them sir.. u dont need those

 

i miss my rota slips on my ek.....ill post pics of em soon

 

Watch, and he probably doesnt even try his verbal vomit on you when you actually gave him an opinion and I never once said anything negative about rotas. Where as, I actually gave him I direction to search to find what he wants.

 

Let it go, man and try using your own advice quoted below:

 

Im having fun now