i have NO idea how to mount these jdm foglights on my 93 civic dx
yeah i know, im stupid lol
but, does it matter that my foglight holes are already cut out all the way?
and if so how will i be able to mount them?
thanks

 

is it a 4door, or 2dr coupe/hatchback?, what you mean cut out all the way? if you remove the bumper and look where your supposed to install the jdm foglights you'll see if you cutout the little holes where you mount the fogs too, if you did your f***** time for a new bumper, take it apart and look where the cutout is their should be little holes where you screw in screws too

as far as wiring, its pretty simple, if it didnt come with instructions(which shoulda) search on google, or lookup a good diy

 

very easy installment...

when i got fog lights and i wired it up myself within 30 mins total.... its pretty common sense if you know your wires... i was afraid at first but it yea simple as ***.... just take your time looking over the things

 

its on a coupe
i know how to wire them
my question is
wheret he foglights go, how do i mount them, i bought ebay ones with NO instructions and the holes where my foglights go are cut out from the previous owner, how can i make my foglights stay in :S

 

LOL damn that sucks you need a new bumper then, cause now no matter HOW you install them they will look like their popping out or mounted bad, i had the same thing happen to me when i installed my fogs, i like the nooblet i am cutout the bumper holes without the bumper removed, with a knife( i know stupid me right?) so then when i had to install the fogs, i had to inevitably remove the bumper, and saw the error of my ways, pondered and pondered, and finally got pissed cut my entire bumper in half and watched it burn, cause i knew their was no way i was gonna be able to then... quick trip to the junkyard, found a descently scratched bumper, repainted it, and did it the RIGHT way, and installed the fogs like a champ :D.... so GOOD LUcK! lol

 

im geussing you got them used? even ebay stuff comes with manuals.. pretty much what he said ^^^^^^^ :D easy to find anyway

 

Shiat
i got them BRAND NEW
and it didnt come with ANY papers at all im kinda upset about that
so there is pretty much NO way to mount the foglights when my bumper is cut like this

dont mind the crappy home made lip, i scrape in EVERYones driveway so i dont wanna break a real lip rofl

 

like i said, remove the bumper and take a look at where you mount them in the back, and see if the mounting holes are still their if they are you got lucky, if not then you need a new bumper, remove the bumper and take pics ill show you

 

nope the mounting holes are gone
is there ANY way for me to "rig" these to fit