Notices
Mid-Atlantic (Sales) VA, DC, and MD

Looking For Custom Exhaust Fabricator

Thread Tools
 
Search this Thread
 
Old Nov 18, 2009 | 07:39 AM
  #1  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Looking For Custom Exhaust Fabricator

Looking for someone that does minor exhaust work on the side for a reasonable price. Need a custom setup done that doesnt require many bends or welds but all the shops around here seem to want more then what ive paid in the past for a full catback setup. Im in the York, PA area and not looking to go more then an hour away.
Old Nov 18, 2009 | 07:53 AM
  #2  
Acura98guy's Avatar
As Soft As A Rock
 
Joined: Aug 2007
Posts: 630
Likes: 0
Default Re: Looking For Custom Exhaust Fabricator

Well there are two places i can think of. One is closer to you

Absolute Pro-formance ( sponsor on here) http://www.hondamarketplace.com/member.php?u=999344225
3306C Baltimore Blvd
Finksburg, MD 21048
410-526-DRAG(3724)
Sales@AbsolutePro-Formance.com
John@AbsolutePro-Formance.com
AOL Instant Messager: Absolutproformnc
Old Nov 18, 2009 | 07:59 AM
  #3  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

yea ive heard of them, they did some work on my brothers car and tuned it, from his experience i dont think i want them to do any work for me.
Old Nov 18, 2009 | 09:43 AM
  #4  
1badascivic's Avatar
Honda-Tech Member
 
Joined: Sep 2007
Posts: 1,383
Likes: 0
From: they call me hondamike
Default Re: Looking For Custom Exhaust Fabricator

Originally Posted by SpoonCivicSir20
yea ive heard of them, they did some work on my brothers car and tuned it, from his experience i dont think i want them to do any work for me.
LMAO SMART JE IMPORTS DID MINE BACK IN THE DAY FOR 200 3.5 HEADER BACK THEY DO SO GOOD WORK.
Old Nov 18, 2009 | 10:45 AM
  #5  
jbrokos307's Avatar
Honda-Tech Member
 
Joined: Jul 2007
Posts: 1,165
Likes: 0
From: Glen burnie, md, usa
Default Re: Looking For Custom Exhaust Fabricator

MBS HERE IN MD DO SOME CRAZY STUFF THEY MADE MY BUDDYS DOWN PIPE LITTLE EXPENSIVE BUT WELL WORTH IT TRUE MANDREL BENDS NO CHEASEY BENDS THEY DID MINE 300
Old Nov 18, 2009 | 10:55 AM
  #6  
Acura98guy's Avatar
As Soft As A Rock
 
Joined: Aug 2007
Posts: 630
Likes: 0
Default Re: Looking For Custom Exhaust Fabricator

Originally Posted by jbrokos307
MBS HERE IN MD DO SOME CRAZY STUFF THEY MADE MY BUDDYS DOWN PIPE LITTLE EXPENSIVE BUT WELL WORTH IT TRUE MANDREL BENDS NO CHEASEY BENDS THEY DID MINE 300
They do nice work. Kurtis works there.

But he asked around and hour. That be a little over that from york.

2539 Mountain Road Pasadena, MD 21122
(410)-360-7105
www.mandrelbendingsolutions.com

Website if you need it.
Old Nov 18, 2009 | 10:56 AM
  #7  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

the resonator that i plan on using has a V shaped box on the end that Y's out, so the flow is perfect. Sell for 85 bux at a local shop. They're are usually the cheapest around and have done full catbacks for under 200 bux but they wanted 250 for my setup which ive got done cheaper on 2 recent cars at another shop that is pretty busy or id go there again.
Old Nov 18, 2009 | 10:58 AM
  #8  
Mike@CCT's Avatar
Formerly Mike@TSR
 
Joined: Jan 2004
Posts: 2,015
Likes: 0
From: Baltimore, MD
Default Re: Looking For Custom Exhaust Fabricator

x2 on MBS for doing it for a good price..If not, ill do it for you homie. Seems like you are having a tough time getting it done. lol
Old Nov 18, 2009 | 11:05 AM
  #9  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

haha yea i dont plan on paying more for an easy half exhaust setup then what ill be selling my hks hi power catback for.
Old Nov 18, 2009 | 11:35 AM
  #10  
Mike@CCT's Avatar
Formerly Mike@TSR
 
Joined: Jan 2004
Posts: 2,015
Likes: 0
From: Baltimore, MD
Default Re: Looking For Custom Exhaust Fabricator

i dont blame you dude, lol
Old Nov 18, 2009 | 02:51 PM
  #11  
jbrokos307's Avatar
Honda-Tech Member
 
Joined: Jul 2007
Posts: 1,165
Likes: 0
From: Glen burnie, md, usa
Default Re: Looking For Custom Exhaust Fabricator

i just figured he may want to anyways cause he gets his stuff tuned by my buddys brother aka mike@psi just call mbs set up an apointment around the same day you will be getin your stuff done with mike or let mike do it hes got the stuff to do it to
Old Nov 18, 2009 | 03:52 PM
  #12  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

just sold my catback so cant drive too far with open header now. LOL I dod have some nice stainless steel piping from another car that i might use to bring the cost down im on a STRICT budget
Old Nov 18, 2009 | 04:46 PM
  #13  
jbrokos307's Avatar
Honda-Tech Member
 
Joined: Jul 2007
Posts: 1,165
Likes: 0
From: Glen burnie, md, usa
Default Re: Looking For Custom Exhaust Fabricator

it will buff out i been driving open header for awhile now lol thank god i havnt been pulled over
Old Nov 18, 2009 | 05:28 PM
  #14  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

im use to it on the dirt track i race on w semi open header but this think is crazy loud, started it after i pulled the exhaust off earlier. Not trying to burn any valves either.
Old Nov 18, 2009 | 05:36 PM
  #15  
fastboy559's Avatar
Honda-Tech Member
 
Joined: May 2007
Posts: 1,083
Likes: 0
From: crownsville, md, usa
Default Re: Looking For Custom Exhaust Fabricator

pm me whhat u have and wat u want done ....stainless?what size?wat do u have?
Old Nov 19, 2009 | 12:26 PM
  #16  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

ok so heres the new setup, im sure most of you guys wont like ive always got to be different and have done it on two previous cars and got lots off attention and positive responses. Only thing that sux about this setup is thats its RIDICOUSLY too loud, doesnt sound any less quite then the open header. LOL So now im looking for small muffler like tips for each side to hopefully quite things down. I didnt put any tips on today bc i didnt like there prices plus i can always add them later. Now i might have to cut them back some if i want to get these ferrari muffler tips. Few pix so show ground clearance and nice job they did for under 200 bux!! =D

These pix are with the car jacked up in the rear






With the car on all four wheels


Ferrari mufflers/tips on ebay i might get
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Old Nov 19, 2009 | 04:46 PM
  #17  
jbrokos307's Avatar
Honda-Tech Member
 
Joined: Jul 2007
Posts: 1,165
Likes: 0
From: Glen burnie, md, usa
Default Re: Looking For Custom Exhaust Fabricator

loose alot of back pressure i shure it is loud id like to hear it
Old Nov 19, 2009 | 08:20 PM
  #18  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

im gonna try to make a quick vid for ***** and giggles. Guess the resonator doesnt have as much baffling as one ive used b4 bc they never sounded like this, then again they were both stock d series and this is a semi built b series
Old Nov 20, 2009 | 07:47 AM
  #19  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

Ok so i made a few vids of this crazy *** exhaust, like is said its LOUD!! Cant wait to get those resonated tips!!

http://www.youtube.com/watch?v=qx84fKfbzds

http://www.youtube.com/watch?v=YMHi_zqSPv4

http://www.youtube.com/watch?v=FXWPCYCO0ao
Old Nov 20, 2009 | 09:43 AM
  #20  
jbrokos307's Avatar
Honda-Tech Member
 
Joined: Jul 2007
Posts: 1,165
Likes: 0
From: Glen burnie, md, usa
Default Re: Looking For Custom Exhaust Fabricator

it dosnt sound that bad at all maby a 2nd res would help plus resonated tips but idk it dosnt sound that raspy just raw idle sounds pretty nice ur speedo is tripy in that 2nd gear pull it just like o snap we are at 80 and whoop but good videos i was thnking of doin a straight pipe setup on my zc with 2 resonaters
Old Nov 20, 2009 | 09:56 AM
  #21  
SpoonCivicSir20's Avatar
Thread Starter
No Sales Forums
 
Joined: Feb 2004
Posts: 3,305
Likes: 0
From: York, PA
Default Re: Looking For Custom Exhaust Fabricator

yea mike pointed it out too when we last dyno'd it, i better fix it before it goes all the way then i have no vtaccccccc HAHA
Old Nov 20, 2009 | 10:12 AM
  #22  
jbrokos307's Avatar
Honda-Tech Member
 
Joined: Jul 2007
Posts: 1,165
Likes: 0
From: Glen burnie, md, usa
Default Re: Looking For Custom Exhaust Fabricator

yea that would blow lol but thumbs up on the pipes i like it its diffrent
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HitF8
Mid-Atlantic
1
Jan 26, 2011 09:07 AM
SpoonCivicSir20
Northeast (Sales)
18
Nov 20, 2009 05:26 PM
TVT_DESIGN
Welding / Fabrication
4
Dec 15, 2007 07:22 AM
The Phil
Welding / Fabrication
8
Apr 20, 2006 11:16 AM




All times are GMT -8. The time now is 12:57 PM.