Wow! UBER RARE! Ryane MS Super Knuckle 88-91 EF Civic CRX New Bearings Sk2 Studs Wow!
Wow! UBER RARE! Ryane MS Super Knuckle 88-91 EF Civic CRX New Bearings Sk2 Studs!
Super Old School Super Rare....only set I know of in the states right now.
I was planning to keep these for a future build, but I've dedicated my funds to my EG now and could use the extra cash flow.
They are totally one off knuckles made for 1988 - 1991 Honda CRX or Civic EF Chassis.
The Hub is raised 1.5" which allows a 1.5" drop without lowering of the suspension, thus adding 1.5" of travel to your suspension.
They have brand new Federal/Mogul hub bearings pressed into them with Skunk2 extended studs.
They have also been further shaved to accommodate the larger 10.2" brakes of the EX
$500 obo shipped and 3% Paypal fees
On to the pictures:




Super Old School Super Rare....only set I know of in the states right now.
I was planning to keep these for a future build, but I've dedicated my funds to my EG now and could use the extra cash flow.
They are totally one off knuckles made for 1988 - 1991 Honda CRX or Civic EF Chassis.
The Hub is raised 1.5" which allows a 1.5" drop without lowering of the suspension, thus adding 1.5" of travel to your suspension.
They have brand new Federal/Mogul hub bearings pressed into them with Skunk2 extended studs.
They have also been further shaved to accommodate the larger 10.2" brakes of the EX
$500 obo shipped and 3% Paypal fees
On to the pictures:




Last edited by ShiroX; Jun 29, 2010 at 07:33 PM.
nice...not hating but, if you raise the susp. 1.5" to drop it 1.5", wouldn't that lead you to the same place as stock?
no....you have to think about it the hub is raised up 1.5" into the wheel well..therefore the 1.5" normally dropped by lowering the springs can be brought back up, thus allowing 1.5" back in suspension travel.
Trending Topics
they are rare beacuse they were always over priced and you can do the same with a good set of sturt and springs or a nice full coilover set.
but good luck
but good luck


