I got a fully rebuilt b16a2 with .5mm ITR pistons with acl race main and rod bearings, new oil pump. micro polished crank. I didnt get a new water pump due to the old one looks fine, but it isnt installed yet. They head is a bone stock head everything looks fine its a 00 head. WILL NOT COME WITH DIZZY. The head is off the block you will need head bolts/studs and a headgasket. for more info or pics pm me or text/call 661-264-6122 Joe I have the reciept of around 700 for all the machine work and parts also.

The swap i am looking for is harness axles mounts whole nine yards besides the ECU because i already have one. or ill include the dizzy for the ecu.

 

bump

 

what do you mean by your title lol

 

title? basically like a full drop in single cam swap for my b16a2 with a 00 head. Everything is assembled on the bottom end. but the head should be cleaned because its been in cabinet in my garage and is most likley dirty haha. I basically ran out of funds and im sallie mae's bitch for like 30g deep. (school loans)

Oh also it will need a timing belt and a top end gasket kit( ie head gasket and stuff...). And a new water pump but the old one looks fine.. dosent look like anything was coming out of the weep hole and spins freely.

 

ttt

 

morning bump

 

bump

 

bump

 

DAM IF ONLY UR SWAP WAS COMPLEATE I WOULD TRADE U N GAVE U SUM CASH

 

bump.

 

I got a b16a2 tranny with vin still intact traded parts from a friend he told me it pops out if 4th but not sure... i was thinking it was a bad detent but i could find anything

 

bump

 

bump