I've got no time for cars anymore, so I'm listing all my project pieces. First up is my engine that I never installed in the car. (It has been run) $3000 is the price, please PM me with questions.

JE 11.5:1 Pistons
Eagle Rods
King Motorsports ported B16 cylinder head
ARP Headstuds
Oversize Supertech Valves
CTR Camshafts (Had some Skunk2 Pro 2's to put in, but they wouldn't work with these valves)
Crower cam gears
RC 310cc injectors
Hondata intake manifold gasket
Skunk2 Intake Manifold
Distributor included

Everything is real clean, pics are available upon request. The injectors and intake manifold are still in their respective packaging because I haven't installed them yet. I checked valve to valve clearance and have the spec sheet that I used. I also check piston to valve clearance and it was fine all the way around.

I also have a lot of other items to go along with this (that will cost extra). I could make this pretty much a complete swap so contact me if you're interested. I have stock ECU's that would require converting and tuning that are available.

The following parts are available:

B16 trans w/ITR LSD and 4.785 FD
Skunk2 Header
Omni Adjustable Test Pipe
Skunk2 full exhaust (for 92-95 Civic Hatch, but I believe it'll work on other models)
ACT Stage II Clutch and a resurfaced flywheel

 

I don't want to sell the trans, header etc, unless the engine sells first.

 

Offers? I take credit cards via paypal

 

I can make this a complete swap

 

how much for the head off? i want the block and the trans. Whats the lowest u will go?

 

I'm not really interested in splitting the engine apart. You are welcome to buy the longblock and sell the head though If you don't need the intake and injectors, I'd knock the price down a bit too.

 

Getting multiple offers on the shortblock and transmission..........considering a split!