PA 97 civic w/ type r swap
Thread Starter
Junior Member
Joined: Jul 2009
Posts: 18
Likes: 0
From: greensburg pa
97 civic w/ type r swap
The engine swap only is from a 96-97 Spec JDM Type-R with about 24,000 miles. The car runs great and this is my daily driver. There are about 170,000 miles on the body. There are 4 new tires, freshly aligned, new tire rods, brakes and rotors. Below is a list of everything on the car. There are some minor cosmetic flaws with the car including the normal rust on the rear passenger quarter-panel not bad at all just surface rust, and front end chips. The only issue that I have with this car is the wiper motor is going out and the person who had the car before me decided to reupholster the roof to a black leopard print.This can easily be removed just never got around to doing it. I can send you more pictures if you would like. Please email me if you have any questions. I am asking $6800 but will take best offer. Serious inq only and I am only looking for awd vehicles as trade. Also comes with new lightweight bronze 15inch wheels and brand new kumho tires. Stock wheels and tires are included in the sale.
-SKUNK 2 Pro-Series Intake Manifold bored out to 68mm
-SKUNK 2 Pro-Series Throttle body 68mm bore
-SKUNK 2 Lowering Springs
-SKUNK 2 Sport Shocks
-Fidanza 7.5lb aluminium flywheel
-Fidanza Short Shifter
-Exedy Stage 2 3-Puck Sprung Ceramic Metallic Clutch
-P30 ECU from a 92-95 B16A JDM Civic
-P30 ECU Chip programming Type-R
-Rywire ECU Conversion Harness OBD-2A to OBD-1
-Rywire Complete Engine Conversion Wire Harness OBD-2A to OBD-1
-Password JDM Distributor Jumper Harness
-Energy Suspension Tranny Shift Linkage Bushings
-Password JDM Thermal Intake Manifold Gasket
-HybridDynamics 99 SI Rear Tranny Mount Bracket
-HybridDynamics 99 SI Timing Mount Bracket
-AVID Racing Aluminium Solid Motormounts
-99 Honda SI Shift Linkage
-Yonaka Axles 94-01 GSR non-abs
-OEM CTR Crank Pulley
-Edelbrock Pro-Flow 4 to 1 Ceramic Coated Race Header
-AEM Short Ram Intake
-Apexi N1 Catback Exhaust
-OMNI-Power Aluminium Rear Control Arms
-BLOX Aluminium Cam Seal
-B&M Fuel Pressure Gauge
-B18C GSR Fuel Injectors OBD-1
-B16A OBD-1 Vtec Solenoid
-99 SI Throttle Cable
-spoon carbon fiber roof spoiler
-15inch brand new lw bronze wheels with brand new tires
i have a polyeurathane front lip and front and rear upper and lower strut bars included in the sale....
724 689 3105 or imurbaghdadi@gmail.com
-SKUNK 2 Pro-Series Intake Manifold bored out to 68mm
-SKUNK 2 Pro-Series Throttle body 68mm bore
-SKUNK 2 Lowering Springs
-SKUNK 2 Sport Shocks
-Fidanza 7.5lb aluminium flywheel
-Fidanza Short Shifter
-Exedy Stage 2 3-Puck Sprung Ceramic Metallic Clutch
-P30 ECU from a 92-95 B16A JDM Civic
-P30 ECU Chip programming Type-R
-Rywire ECU Conversion Harness OBD-2A to OBD-1
-Rywire Complete Engine Conversion Wire Harness OBD-2A to OBD-1
-Password JDM Distributor Jumper Harness
-Energy Suspension Tranny Shift Linkage Bushings
-Password JDM Thermal Intake Manifold Gasket
-HybridDynamics 99 SI Rear Tranny Mount Bracket
-HybridDynamics 99 SI Timing Mount Bracket
-AVID Racing Aluminium Solid Motormounts
-99 Honda SI Shift Linkage
-Yonaka Axles 94-01 GSR non-abs
-OEM CTR Crank Pulley
-Edelbrock Pro-Flow 4 to 1 Ceramic Coated Race Header
-AEM Short Ram Intake
-Apexi N1 Catback Exhaust
-OMNI-Power Aluminium Rear Control Arms
-BLOX Aluminium Cam Seal
-B&M Fuel Pressure Gauge
-B18C GSR Fuel Injectors OBD-1
-B16A OBD-1 Vtec Solenoid
-99 SI Throttle Cable
-spoon carbon fiber roof spoiler
-15inch brand new lw bronze wheels with brand new tires
i have a polyeurathane front lip and front and rear upper and lower strut bars included in the sale....
724 689 3105 or imurbaghdadi@gmail.com
Honda-Tech Member
Joined: May 2006
Posts: 298
Likes: 0
From: elizabethtown, ky, usa
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Todd00
Wheels
17
May 4, 2011 11:00 AM
