NAME: Chris G
EMAIL: alloutperformance401@gmail.com
LOCATION: Providence, RI
PAYMENT PREFERENCE: Locally- Cash Shipped- Paypal

All products are sold as is. Prices are not set in stone. Almost everything i post is just sitting taking up space so a good offer will usually not be turned down. It would be in your best interest to send me an email if your interested since that email is connected to my phone. Pictures will be provided upon request. Buyer pays for all shipping costs. I am willing to meet half way with people within reason.

PRICES ARE ALL WITHOUT SHIPPING!
Products:
Professional Products GSR 68mm TB- $170


B series AEM Red Fuel Rail (used) & AEM Blue fuel pressure regulator (New)- $150 for both


B Series XTD 12lb flywheel- $100

RC 370cc Injectors (low miles used)- $150

GSR Head with supertech dual valve springs and retainers. STD size supertech valves. OEM GSR cams. OEM
GSR intake manifold w.out TB. freshly resurfaced. 0 miles since install of valvetrain- $700 obo

OEM Type R Timing Belt- $50

2 Complete Zex Dry Kits without the Nitrous Bottle. All you need is a ZEX bottle- $125 Each

H22 Built Block- Sleeved by F&H Machine Shop in Coventry RI. These are the only guys who touch any of the motors we build. The Block is a closed deck h22 block with iron sleeves. It has Arias 87mm STD size pistons Compression of 9.0.1. Brian Crower rods. ACL bearings. ARP Head Studs. 0 Miles on this block. Looking to get $2,000 obo

H22 Head with full KMS Valvetrain: Dual Springs and retainers w. STD size valves with Bronze Valve guides. 3K miles since the install of the valvetrain. No intake manifold with this head. Comes with h22 factory cams. $500obo

H Series Skunk 2 Proseries Intake Manifold with NOS direct port plummed already. Asking $350 obo

Accord Ex Tranny 5sp- No grinds shifted good!- 200 obo

H22 Gsport Fuel RaiL with 325cc Injectors- comes with stainless steel feed line for EK- $150

H swap Axles with fit ek/eg/dc with half shaft- $150

AEM 3 Bolt Red Cam Gears- $150

You can buy all the H22 Parts together for a deal of $2500. That is pretty much the whole swap. All you would need is mounts and a wiring harness.

Thanks for looking!!

 

is that h22 assembled?

 

pic of the fuel rail?

 

yea the motor is 90% assembled...all that is left is put the cams and such in..

pic of fuel rail will come tonight.

 

I see you have lots of B series stuff too, h22 also. So, I am not sure if you have the b series or h series fuel rail. Which one are they?

 

im sorry for the confusion the AEM is b series.

the gsport is h22.

 

bump for today..pics will be up lata of the fuel rail and the throttle body!

 

pics are up!

 

to the top!!