sooo i wanna get these bisimoto rods for my mahle pistons it says the bisi rods are 142mm in length and then on the mahle piston box it says rod length 143mm.

soo do i have to get a rod thats 143mm and if so where?
or can i use the bisi rods

 

bumpity bump bump

 

Hmmmmmm......after thinking long and hard, consulting with my 10yrs of interweb buddies, and verifying it with The Ghost of Soichiro Honda himself this is what I figured out;
CALL BISI or PM one of his 3-4 employees that frequent h-t.com..........whew....my brain hurts after the thought I put into this one. I've never had to call on all my resources before.

 

Kinda harsh but tough love works sometimes.

Kid, you mention nothing of what you're trying to do. I assume that you want rods for an H22. The H22 from Japan uses 143mm rods. If you ordered 142mm and expect 142mm rods but got 143mm rods then I suggest you talk to the retailer about it. Mock up assembly will remove all doubts on compatability though.

-P

 

no not an h22
f22

 

 

why mahles on an F?

 

You're asking that from a guy that can't call/PM Bisi.......

 

 

Sorry if I seem like a jerk.....but man, peeple iz lazy deez dayz.
Being reminded of last night's episode of Family Guy.
Quagmire didn't know about Internet ****.........

 

becuz they r 9:1 compression and im gonna boost it

 

Ok.....so why would you buy Mahle's when you can buy any other brand for the "F"?
Iron sleeves=Unlimited Forged Possibilities

 

they are forged pistons btw.

and becuz dude i got them for about 40 bucks. and money is tight as hell so illl deal with that

 

If money is tight....you have no business building an engine.
:this-won't-turnout-good-flag:

 

:this-will-turn-out-entertaining-grin:
check back in 6 months


i understand money is tight, i have been working on the same **** for... well, lets just say a long time. but for the sake of doing it right, all that time you don't have the money / saving the money you should be reading your *** off.
there is very little chance that any question you have hasn't already been asked.

 

i understand i just know how the kid feels i was in his boat until I got the same treatment and realized i was being lazy and didn't really look well and also i never explained why i was doing or why i purchased this or that

 

Honestly, just stop now. You spent $40, ok, but putting an engine together the right way takes money and then more money than that. Just keep researching for now like was said

 

Fixed
.......and when you Boost it;
money and then more money than that money and then more money than that money and then more money than that money and then more money than that money and then more money than that money and then more money than that

 

Just do what you want to do, BOOST it. Just dont blow her up because thats when you will need "money and then more money than that money and then more money than that money and then more money than that. money and then more money than that money and then more money than that money and then more money than that money and then more money than that money and then more money than that money and then more money"

 

My Nitrous Disclaimer[but carries over to Turbo]
If you don't have the money and/or resources to replace/repair an engine, you have no business playing with it.